w83627hf watchdog
Hi,
My Supermicro X5DPL-iGM-O has a winbond w83627hf chip onboard that includes a watchdog timer. I found a driver on freshmeat that points here: http://www.freestone.net/soft/pkg/w83627hf-wdt.tar.gz
but this does not seem to work correctly on 2.4.23, even with my modifications to the ioports and registers that Supermicro sent me. I have tried to contact the developer, he hasn't responded. I also located a post to linux-kerel quite sometime ago:
http://seclists.org/lists/linux-kernel/2002/Dec/att-4150/w83627hf_wdt.c
I haven't tried this driver just yet. The lm_sensors project seems to
include a driver for this chip as well, but not for the watchdog part. The specifications Supermicro sent me for the watchdog function are located here:
http://www.stinkfoot.org/wdt.txt
Any help would greatly be appreciated, I know this particular chip is included with many motherboards.
Ethan
Quoted 4 lines · Ethan Weinstein
My Supermicro X5DPL-iGM-O has a winbond w83627hf chip onboard that includes a watchdog timer. I found a driver on freshmeat that points here: http://www.freestone.net/soft/pkg/w83627hf-wdt.tar.gz
but this does not seem to work correctly on 2.4.23, even with my modifications to the ioports and registers that Supermicro sent me. I have tried to contact the developer, he hasn't responded. I also located a post to linux-kerel quite sometime ago:http://seclists.org/lists/linux-kernel/2002/Dec/att-4150/w83627hf_wdt.c
Thought I'd mention that the above mentioned driver apparently works quite well with the w83627hf, I've run some preliminary tests simulating lockups, and the box reboots according to the timer setttings.
Ethan
Quoted 17 lines · Ethan Weinstein
Hi,
My Supermicro X5DPL-iGM-O has a winbond w83627hf chip onboard that includes a watchdog timer. I found a driver on freshmeat that points
here: http://www.freestone.net/soft/pkg/w83627hf-wdt.tar.gz
but this does not seem to work correctly on 2.4.23, even with my modifications to the ioports and registers that Supermicro sent me. I have tried to contact the developer, he hasn't responded. I also located a post to linux-kerel quite sometime ago:http://seclists.org/lists/linux-kernel/2002/Dec/att-4150/w83627hf_wdt.c
I haven't tried this driver just yet. The
lm_sensorsproject seems to
include a driver for this chip as well, but not for the watchdog part. The specifications Supermicro sent me for the watchdog function are located here:
Quoted 4 lines
http://www.stinkfoot.org/wdt.txt
Any help would greatly be appreciated, I know this particular chip is included with many motherboards.
well, judging from the Super Micro documentation (which looks sufficient to me I would say it shouldn't be too hard to code a watchdog driver similar to the one in linux-2.4.23/drivers/char/wdt.c
the testing will be a little more complicated, as as you'll have to do it with the 'reboot' activated which will force your system down, if it works (in development the actual reset is often replaced by a signal light showing that the reset 'would' occur)
best,
Herbert
Quoted 8 lines
Ethan
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Quoted 5 lines · Ethan Weinstein
Hi,
My Supermicro X5DPL-iGM-O has a winbond w83627hf chip onboard that includes a watchdog timer. I found a driver on freshmeat that points here: http://www.freestone.net/soft/pkg/w83627hf-wdt.tar.gz
but this does not seem to work correctly on 2.4.23, even with my modifications to the ioports and registers that Supermicro sent me. I have tried to contact the developer, he hasn't responded. I also located a post to linux-kerel quite sometime ago:
Quoted 8 lines
http://seclists.org/lists/linux-kernel/2002/Dec/att-4150/w83627hf_wdt.c
I haven't tried this driver just yet. The
lm_sensorsproject seems to
include a driver for this chip as well, but not for the watchdog part. The specifications Supermicro sent me for the watchdog function are located here:http://www.stinkfoot.org/wdt.txt
Any help would greatly be appreciated, I know this particular chip is included with many motherboards.
That freestone piece of crap didn't work for me,
and looking at the code I'm not surprised.
I did a patch against the existing advantechwdt since the newer advantechs use the w83627hf.
http://www.pixelbeat.org/patches/advantechwdt.diff
I think the advantechwdt.c should be renamed to w83627hf_wdt.c to avoid confusion (or replaced with the w83627hf_wdt.c you referenced above, that I didn't notice when
I did this).
Pádraig.
p.s. I needed to merge the info from a couple
of different winbond manuals to do the driver.
Note also the advantech manual describes the
wrong watchdog!