APIC support on Slot-A Athlon, K6
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 11 lines
Quoted 7 lines
Unfortunately, this disables the APIC support (if it existed) on a Slot-A Athlon 600 MS-6167 (family 6, model 1, AMD-751/756), and a K6/3 400 Tyan S1598 (family 5, model 9, MVP3/686A).
What is the purpose of this check? Why is the APIC availability dependent on the CPU, rather than just the southbridge?
This code checks for the ability to enable the local APIC, which is integrated into the processor. The local APIC is not implemented in K6 or K7 model 1, so the check is correct.
Thanks, that just cleared up a huge misconception (I had the APIC and I/O-APIC confused, apparently).
This page cleared a lot up (must remember to STFW occasionally):
http://www.microsoft.com/whdc/hwdev/platform/proc/IO-APIC.mspx
Quoted 2 lines
Furthermore, I/O-APIC usage requires (in hardware) that the processor has a local APIC.
What can the APIC support alone accomplish, without an I/O-APIC? Just NMI watchdog and related things? (looking at CONFIG_APIC help) Looks like I/O-APIC is the real desired feature, but a functioning local APIC, though not very useful by itself, is a prerequisite for it.
Quoted 6 lines
Quoted 3 lines
Also, there are only
checks for Intel and AMD CPUs. Is it not possible to use an APIC in conjunction with a Cyrix, et.al. ?The other manufacturers haven't yet implemented local APIC functionality in their processors.
Ok, much more clear.
Quoted 6 lines
Quoted 3 lines
The APIC is also not enabled on this machine, but it is a 586B southbridge,= which
I am not sure contains an APIC.What processor? As I wrote above, I/O-APIC can't be used unless the processor has a local APIC.
Cyrix. :D Obviously, it won't work simply because of that. I am curious if the VIA 586B has a IO-APIC though (the 686A/B do) so that it would work if I put a different processor in it. VIA no longer put their datasheets on the web anymore...
Quoted 3 lines
Some BIOSen have an option for enabling/disabling I/O-APIC mode. Some BIOSen skip the "legacy" MP tables and only announce the I/O-APIC config data via ACPI, so working ACPI may be required.
Also useful info. Thanks!
Signature · 1 line
Ryan Underwood, <[email protected]>
Quoted 2 lines · someone
Quoted 2 lines
Furthermore, I/O-APIC usage requires (in hardware) that the processor has a local APIC.
Quoted 4 lines · Ryan Underwood
What can the APIC support alone accomplish, without an I/O-APIC? Just NMI watchdog and related things? (looking at
CONFIG_APIChelp) Looks like I/O-APIC is the real desired feature, but a functioning local APIC, though not very useful by itself, is a prerequisite for it.
LVT interrupts are likely still usable in such scenarios.
-- wli