2.6 de2104x.c jumbo frames
Subsystems (2)
PATCH 1/1 2.6 de2104x.c jumbo frames
Attached is a patch which enables jumbo frames on de2104x based boards. It makes it possible to set an MTU of up to 2025 bytes. However, testing against an NE3200 board using 10base-2 shows assorted problems when going above 2018 bytes (for frames without VLAN tags). The problems show up as framing errors, bad CRCs and such (in both directions).
The patch is against 2.6.0-test10 with 2.6.0-test9-bk24-netdrvr-exp1 on top of it.
Signature · 2 lines
Regards, Rask Ingemann Lambertsen
drivers/net/tulip/de2104x.c renamed from drivers/net/tulip/de2104x.c-orig +27 -4
@@ -19,7 +19,6 @@ like dl2k.c/sundance.c * Constants (module parms?) for Rx work limit * Complete reset on PciErr - * Jumbo frames / dev->change_mtu * Adjust Rx FIFO threshold and Max Rx DMA burst on Rx FIFO error * Adjust Tx FIFO threshold and Max Tx DMA burst on Tx FIFO error * Implement Tx software interrupt mitigation via
@@ -36,6 +35,7 @@#include <linux/kernel.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> +#include <linux/if_vlan.h> #include <linux/init.h> #include <linux/pci.h> #include <linux/delay.h>
@@ -67,11 +67,13 @@MODULE_PARM (debug,"i" );MODULE_PARM_DESC (debug,"de2104x bitmapped message enable number" ); +#define PKT_BUF_SZ_MAX 2047/* Maximum Rx buffer size. */ +/* Set the copy breakpoint for the copy-only-tiny-buffer Rx structure. */ #if defined(__alpha__) || defined(__arm__) || defined(__hppa__) \ || defined(__sparc_) || defined(__ia64__) \ || defined(__sh__) || defined(__mips__) -static int rx_copybreak =1518 ; +static int rx_copybreak =PKT_BUF_SZ_MAX ;#else static int rx_copybreak =100 ;#endif
@@ -403,7 +410,7 @@int rc;while (rx_work--) { -u32 status, len; +u32 status, len, status_hacked;dma_addr_t mapping;struct sk_buff *skb, *copy_skb;unsigned copying_skb, buflen;
@@ -424,7 +431,13 @@ goto rx_next; } -if (unlikely ((status &0x38008300 ) !=0x0300 )) { +/* Ugly Jumbo frame hack. Remove error flag on long frames. */ +if ((status & (RxErrLong | RxErrCRC | RxErrFIFO | RxErrRunt | RxErrFrame)) == RxErrLong) + status_hacked = status & ~(RxError | RxErrLong); +else + status_hacked = status; + +if (unlikely ((status_hacked &0x38008300 ) !=0x0300 )) {de_rx_err_acct (de, rx_tail, status, len); goto rx_next; }
@@ -1372,6 +1390,8 @@printk (KERN_DEBUG "%s: enabling interface\n" , dev->name); de->rx_buf_sz = (dev->mtu <=1500 ?PKT_BUF_SZ : dev->mtu +32 ); +if (de->rx_buf_sz >PKT_BUF_SZ_MAX ) + de->rx_buf_sz =PKT_BUF_SZ_MAX ; rc =de_alloc_rings (de);if (rc) {
@@ -1464,6 +1482,18 @@netif_wake_queue (dev); } +static int de_change_mtu (struct net_device *dev,int mtu) +{ +if (netif_running (dev)) +return (-EBUSY ); + +if (mtu <0 || mtu >PKT_BUF_SZ_MAX -VLAN_ETH_HLEN -4 ) +return (-EINVAL ); + + dev->mtu = mtu; +return (0 ); +} +static void __de_get_regs (struct de_private *de,u8 *buf) {int i;
@@ -1964,6 +1994,7 @@ dev->ethtool_ops = &de_ethtool_ops; dev->tx_timeout = de_tx_timeout; dev->watchdog_timeo =TX_TIMEOUT ; + dev->change_mtu = de_change_mtu; dev->irq = pdev->irq;