Skip to contentSkip to conversation

Multiple keyboard/monitor vs linux-2.6?

DISCUSSION Svetoslav Slavtchev 3 participants 7 messages Dec 12, 2003 – Dec 13, 2003

lore
Share & tools
lore
#0 lore raw

Hi,

it does work, and you even can have multiple virtual consoles, and even on a single dual headed Matrox G4xx/G550 although there are still some small/big :-) issues

may i ask what do you mean by that :

----
Even though the HOWTO is more for Backstreet Ruby, I couldn't make head or tail of it. ^^^^^^^^^^^^^^^^^^^^^^^^
----

asking cause i wrote the howto,
and i hardly get feedback

the one thing i know is, that it's simply too big , but i tried to cover everything and there is no other way :(

best,

svetljo

PS.

please CC me as i'm not subscribed to lkml

Signature · 2 lines
+++ GMX - die erste Adresse für Mail, Message, More +++
Neu: Preissenkung für MMS und FreeMMS! http://www.gmx.net
#1 lore raw
Quoted 18 lines · Svetoslav Slavtchev

Hi,

it does work, and you even can have multiple virtual consoles, and even on a single dual headed Matrox G4xx/G550 although there are still some small/big :-) issues

may i ask what do you mean by that :

----
Even though the HOWTO is more for Backstreet Ruby, I couldn't make head or tail of it. ^^^^^^^^^^^^^^^^^^^^^^^^
----

asking cause i wrote the howto,
and i hardly get feedback

Quoted 6 lines

the one thing i know is, that it's simply too big , but i tried to cover everything and there is no other way :(

best,

svetljo

For kernel-2.6.x, Ruby would be the only option. So, I'll eventually get my teeth into it. But, I don't want to modify both kernel and X, especially kernel. If X doesn't work, I can use the old X. But, if kernel doesn't work, then I have to reboot.

Quoted 5 lines

PS.

please CC me as i'm not subscribed to lkml

If you're not subscribed, how did you post to the mailing-list?

Signature · 2 lines
William Park, Open Geometry Consulting, <[email protected]>
Linux solution for data management and processing. 
#2 lore raw
Quoted 22 lines · Svetoslav Slavtchev
Quoted 21 lines

Hi,

it does work, and you even can have multiple virtual consoles, and even on a single dual headed Matrox G4xx/G550 although there are still some small/big :-) issues

may i ask what do you mean by that :

----
Even though the HOWTO is more for Backstreet Ruby, I couldn't make head or tail of it. ^^^^^^^^^^^^^^^^^^^^^^^^
----

asking cause i wrote the howto,
and i hardly get feedback

the one thing i know is, that it's simply too big , but i tried to cover everything and there is no other way :(

Quoted 6 lines
Quoted 3 lines

best,

svetljo

For kernel-2.6.x, Ruby would be the only option.

not really, there was a ? one liner ? fix
to make the kernel ignore usb keyboards
so you can still use Miguel's solution

Quoted 4 lines

So, I'll eventually
get my teeth into it. But, I don't want to modify both kernel and X, especially kernel. If X doesn't work, I can use the old X. But, if kernel doesn't work, then I have to reboot.

if you just want muliple X users bruby/ ruby should work as stable as 2.4 /2.6
(works at least for 20-25 people i helped, reading the howto and getting it up),

but if you want multiple virtual terminals, you'll have to experiment :-) and read a lot the linuxconsole ml, as it's not yet documented

i really don't see what's the problem with installing XFree, it's just another 2mb binary, and it has better stability for most video cards, there are some that don't need it, so
it's up to you to decide " go for the stable solution or experiment"

Quoted 8 lines
Quoted 5 lines

PS.

please CC me as i'm not subscribed to lkml

If you're not subscribed, how did you post to the mailing-list?

just send a mail to linux-kernel (at) vger.kernel.org, you don't have to be subscribed to post to lkml /* thanks god */

best,

svetljo

Signature · 2 lines
+++ GMX - die erste Adresse für Mail, Message, More +++
Neu: Preissenkung für MMS und FreeMMS! http://www.gmx.net
#3 lore raw
Quoted 6 lines · Svetoslav Slavtchev

if you just want muliple X users bruby/ ruby should work as stable as 2.4 /2.6 (works at least for 20-25 people i helped, reading the howto and getting it up),

but if you want multiple virtual terminals, you'll have to experiment :-) and read a lot the linuxconsole ml, as it's not yet documented

Multiple X users (via xdm login) is what I'm looking for. X-terminal is the canonical answer. In the light of recent development in PXE support which effectively eliminated third-party packages like Etherboot, Netboot, Rom-a-matic, and LTSP, I was wondering if it's possible to go the next logical step and eliminate motherboard/case as well.

This would be ideal for home market, where you want multiple users (ie. kids) but with only one PC. Sell it as "Linux Mainframe"... :-)

Signature · 2 lines
William Park, Open Geometry Consulting, <[email protected]>
Linux solution for data management and processing. 
#4 lore raw
Quoted 9 lines · Svetoslav Slavtchev
Quoted 5 lines

if you just want muliple X users bruby/ ruby should work as stable as 2.4 /2.6 (works at least for 20-25 people i helped, reading the howto and getting it up),

but if you want multiple virtual terminals, you'll have to experiment

:-)

Quoted 1 line

and read a lot the linuxconsole ml, as it's not yet documented

Quoted 8 lines

Multiple X users (via xdm login) is what I'm looking for. X-terminal is the canonical answer. In the light of recent development in PXE support which effectively eliminated third-party packages like Etherboot, Netboot, Rom-a-matic, and LTSP, I was wondering if it's possible to go the next logical step and eliminate motherboard/case as well.

This would be ideal for home market, where you want multiple users (ie. kids) but with only one PC. Sell it as "Linux Mainframe"... :-)

it should be doable, although it would be easier to setup
if all the ruby PC's used a basic local installation and load everything else
from a LTSP server

i wanted to try it, but i own a single PC, so ...

best,

svetljo

Signature · 2 lines
+++ GMX - die erste Adresse für Mail, Message, More +++
Neu: Preissenkung für MMS und FreeMMS! http://www.gmx.net
#5 lore raw
In reply to William Park

Quote from William Park <[email protected]>:

Quoted 8 lines · Svetoslav Slavtchev
Quoted 6 lines

if you just want muliple X users bruby/ ruby should work as stable as 2.4 /2.6 (works at least for 20-25 people i helped, reading the howto and getting it up),

but if you want multiple virtual terminals, you'll have to experiment :-) and read a lot the linuxconsole ml, as it's not yet documented

Quoted 8 lines

Multiple X users (via xdm login) is what I'm looking for. X-terminal is the canonical answer. In the light of recent development in PXE support which effectively eliminated third-party packages like Etherboot, Netboot, Rom-a-matic, and LTSP, I was wondering if it's possible to go the next logical step and eliminate motherboard/case as well.

This would be ideal for home market, where you want multiple users (ie. kids) but with only one PC. Sell it as "Linux Mainframe"... :-)

Search the archives - this comes up every few months on LKML.

John.

#6 lore raw
Quoted 16 lines

Quote from William Park <[email protected]>:

Quoted 6 lines · Svetoslav Slavtchev
Quoted 5 lines

if you just want muliple X users bruby/ ruby should work as stable as 2.4 /2.6 (works at least for 20-25 people i helped, reading the howto and getting it up),

but if you want multiple virtual terminals, you'll have to experiment

:-)

Quoted 8 lines
Quoted 1 line

and read a lot the linuxconsole ml, as it's not yet documented

Multiple X users (via xdm login) is what I'm looking for. X-terminal is the canonical answer. In the light of recent development in PXE support which effectively eliminated third-party packages like Etherboot, Netboot, Rom-a-matic, and LTSP, I was wondering if it's possible to go the next logical step and eliminate motherboard/case as well.

Quoted 7 lines
Quoted 2 lines

This would be ideal for home market, where you want multiple users (ie. kids) but with only one PC. Sell it as "Linux Mainframe"... :-)

Search the archives - this comes up every few months on LKML.

John.

with the small difference that now it's doable,
and previously mostly impossible

/* ya i know that Miguel solution exist quite a long time
* already, but it's a bit hard to use it on systems with more
* then 2 users and configuring the input devices is not easy,
* optimal, and tere is no way to get multi-user virtual consoles *
* ruby doesn't have this issues
*/

best,

svetljo

Signature · 2 lines
+++ GMX - die erste Adresse für Mail, Message, More +++
Neu: Preissenkung für MMS und FreeMMS! http://www.gmx.net