Skip to contentSkip to conversation

uhci driver looping in 2.6-test10

DISCUSSION Dag Nygren 1 participant 1 message Dec 13, 2003

lore
Share & tools
lore

Dag Nygren

author
#0 lore raw

Hi,

I installed 2.6-test10 on one system here some time ago and had my first crash tonight.
The system was completely frozen and the console in X window state and didn't respond to SysRq, so I didn't get an OOPS. But the kernellog shows one irregularity:

Dec 12 16:25:57 dag kernel: drivers/usb/host/uhci-hcd.c: 1080: wakeup_hc
Dec 12 16:25:59 dag kernel: drivers/usb/host/uhci-hcd.c: 1080: suspend_hc
.......
Dec 13 02:01:59 dag kernel: drivers/usb/host/uhci-hcd.c: 1080: suspend_hc
Dec 13 02:01:59 dag kernel: drivers/usb/host/uhci-hcd.c: 1080: wakeup_hc
Dec 13 02:02:02 dag kernel: drivers/usb/host/uhci-hcd.c: 1080: suspend_hc
Dec 13 02:02:02 dag kernel: drivers/usb/host/uhci-hcd.c: 1080: wakeup_hc

(This was obviously the time of the crash)

It seems to have been looping with about 3 sec intervals.

The system is a 2x500MHz Pentium3, Intel N440BX motherboard and it was very busy yesterday compiling a lot of software (still was when it crashed)
There was absolutely NO activity on the USB yesterday.

BRGDS

Signature · 5 lines
Dag Nygren                               email: [email protected]
Oy Espoon NewTech Ab                     phone: +358 9 8024910
Träsktorpet 3                              fax: +358 9 8024916
02360 ESBO                              Mobile: +358 400 426312
FINLAND