Skip to contentSkip to conversation

Enhancement patch for the Adaptec SCSI Driver (2915LP / 2930LP)

PATCH Holger Lehmann 1 participant 1 message Dec 15, 2003

lore
Share & tools
lore
#0 lore raw

Hi everyone,

I'll make this really quick.
Attached to this email is a small patch for the current aic7xxx driver for Linux. It can be applied to 2.4.x, 2.5.x and 2.6.x and the original adaptec driver version 2.0.2 .

This patch adds one PCI device id mapping for the Adaptc 2915LP controller ( a low profile controller). I believe that the 2930LP is the same controller as the 2915LP, so the patch ought to work for that one as well. Furthermore there seems to be an Fujitsu AVA-2915LP controller which is most likely the same as above.

The patch is verified to work on a 2.4.20 kernel. A simple tape drive was attached to it and that worked as well :-)

I have submitted the patch to Adaptec with the request for integration but no one knows if and when that will happen. Perhaps someone on this list is or feels responible for that driver and can make the inclusion happen.

Thanks in advance,
- Holger

aic7xxx_pci.c renamed from aic7xxx_pci.c.orig +7 -0
@@ -127,6 +127,7 @@
 
 #define ID_AIC7892			0x008F9005FFFF9005ull
 #define ID_AIC7892_ARO			0x00839005FFFF9005ull
+#define ID_AHA_2915LP			0x0082900502109005ull
 #define ID_AHA_29160			0x00809005E2A09005ull
 #define ID_AHA_29160_CPQ		0x00809005E2A00E11ull
 #define ID_AHA_29160N			0x0080900562A09005ull
@@ -468,6 +469,12 @@
 		ID_AIC7892_ARO,
 		ID_ALL_MASK,
 		"Adaptec aic7892 Ultra160 SCSI adapter (ARO)",
+		ahc_aic7892_setup
+	},
+	{
+		ID_AHA_2915LP,
+		ID_ALL_MASK,
+		"Adaptec 2915LP Ultra160 SCSI adapter",
 		ahc_aic7892_setup
 	},
 	/* aic7895 based controllers */