Skip to contentSkip to conversation

gcc-3.3.2 vs 2.6.0-test11

DISCUSSION J.A. Magallon 4 participants 6 messages Dec 17, 2003 – Dec 18, 2003

lore
Share & tools
lore
#0 lore raw

hi all..

Are there any known issues wrt gcc-3.3.2 ?
I built test11 with gcc-3.3.1 and worked fine, the same config built with 3.3.2 does not pass init launch:

INIT version 2.85 booting

and nothing more....

I have to check, but I think it also miscompiles 2.4. I rebuilt a kernel on a remote box (2.4.23 + assorted patches), that worked fine under 3.3.1, and after reboot the box didn't came to life, no ping.

TIA

Signature · 4 lines
J.A. Magallon <jamagallon()able!es>     \                 Software is like sex:
werewolf!able!es                         \           It's better when it's free
Mandrake Linux release 10.0 (Cooker) for i586
Linux 2.6.0-test11-jam2 (gcc 3.3.1 (Mandrake Linux 9.2 3.3.1-4mdk))
#1 lore raw
Quoted 5 lines · J.A. Magallon

hi all..

Are there any known issues wrt gcc-3.3.2 ?
I built test11 with gcc-3.3.1 and worked fine, the same config built with 3.3.2 does not pass init launch:

I'm running test11 built with 3.3.2 without any (obviously gcc related) problems

Andrew Walrond

#2 lore raw
In reply to J.A. Magallon

using gcc 3.3.2 with 2.6.0-test11 and 2.4.23. boots cleanly on Ayhlon XP, Athlon-trbind, PentiumIII.

which compilation options are you using?

Luigi

Quoted 32 lines · J.A. Magallon

Date: Wed, 17 Dec 2003 12:37:42 +0100
From: J.A. Magallon <[email protected]>
To: Lista Linux-Kernel <[email protected]>
Subject: gcc-3.3.2 vs 2.6.0-test11

hi all..

Are there any known issues wrt gcc-3.3.2 ?
I built test11 with gcc-3.3.1 and worked fine, the same config built with 3.3.2 does not pass init launch:

INIT version 2.85 booting

and nothing more....

I have to check, but I think it also miscompiles 2.4. I rebuilt a kernel on a remote box (2.4.23 + assorted patches), that worked fine under 3.3.1, and after reboot the box didn't came to life, no ping.

TIA

--
J.A. Magallon <jamagallon()able!es> \ Software is like sex:
werewolf!able!es \ It's better when it's free
Mandrake Linux release 10.0 (Cooker) for i586
Linux 2.6.0-test11-jam2 (gcc 3.3.1 (Mandrake Linux 9.2 3.3.1-4mdk)) -
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#3 lore raw
Quoted 6 lines · On 12.17, [email protected] wrote:

using gcc 3.3.2 with 2.6.0-test11 and 2.4.23. boots cleanly on Ayhlon XP, Athlon-trbind, PentiumIII.

which compilation options are you using?

.config attached

Signature · 4 lines
J.A. Magallon <jamagallon()able!es>     \                 Software is like sex:
werewolf!able!es                         \           It's better when it's free
Mandrake Linux release 10.0 (Cooker) for i586
Linux 2.6.0-test11-jam2 (gcc 3.3.1 (Mandrake Linux 9.2 3.3.1-4mdk))
#4 lore raw
In reply to J.A. Magallon
Quoted 6 lines · J.A. Magallon

hi all..

Are there any known issues wrt gcc-3.3.2 ?
I built test11 with gcc-3.3.1 and worked fine, the same config built with 3.3.2 does not pass init launch:

Quoted 8 lines

INIT version 2.85 booting

and nothing more....

I have to check, but I think it also miscompiles 2.4. I rebuilt a kernel on a remote box (2.4.23 + assorted patches), that worked fine under 3.3.1, and after reboot the box didn't came to life, no ping.

Well, it fails to compile also 2.4. A 2.4 kernel that worked fine hangs when launching init if built with this gcc. It boots again if is built at -O instead of -O2.

I think it is a Mandrake specific problem, as changelog reads:

* Tue Dec 16 2003 Gwenole Beauchesne <[email protected]> 3.3.2-2mdk

- Add gcj(1), aka make gc happy
- Add [ep]mmintrin.h for even for SSE/PNI intrinsics
- Move cc1 to gcc-cpp, thusly nuking gcc dep for XFree86
- Remove -funit-at-a-time from -O2 since it is memory hungry

* Mon Dec 15 2003 Gwenole Beauchesne <[email protected]> 3.3.2-1mdk

- 3.3.2 + 3.3-hammer branch (2003/12/08)

I think I don't like that hammer branch...

Thanks.

Signature · 4 lines
J.A. Magallon <jamagallon()able!es>     \                 Software is like sex:
werewolf!able!es                         \           It's better when it's free
Mandrake Linux release 10.0 (Cooker) for i586
Linux 2.6.0-test11-jam2 (gcc 3.3.1 (Mandrake Linux 9.2 3.3.1-4mdk))
#5 lore raw
Quoted 29 lines · J.A. Magallon
Quoted 6 lines · J.A. Magallon

hi all..

Are there any known issues wrt gcc-3.3.2 ?
I built test11 with gcc-3.3.1 and worked fine, the same config built with 3.3.2 does not pass init launch:

Quoted 8 lines

INIT version 2.85 booting

and nothing more....

I have to check, but I think it also miscompiles 2.4. I rebuilt a kernel on a remote box (2.4.23 + assorted patches), that worked fine under 3.3.1, and after reboot the box didn't came to life, no ping.

Well, it fails to compile also 2.4. A 2.4 kernel that worked fine hangs when launching init if built with this gcc. It boots again if is built at -O instead of -O2.

I think it is a Mandrake specific problem, as changelog reads:

* Tue Dec 16 2003 Gwenole Beauchesne <[email protected]> 3.3.2-2mdk

- Add gcj(1), aka make gc happy
- Add [ep]mmintrin.h for even for SSE/PNI intrinsics
- Move cc1 to gcc-cpp, thusly nuking gcc dep for XFree86
- Remove -funit-at-a-time from -O2 since it is memory hungry

Quoted 5 lines

* Mon Dec 15 2003 Gwenole Beauchesne <[email protected]> 3.3.2-1mdk

- 3.3.2 + 3.3-hammer branch (2003/12/08)

I think I don't like that hammer branch...

I wont add my opinion here about the hammer branch, but try the gcc-3_3-rhl-branch which is gcc-3.3.relative_current maintained by Jakub, and used by us with a patch or two added.

Regards,

Signature · 1 line
Martin Schlemmer