Skip to contentSkip to conversation

PROBLEM

DISCUSSION Federico Freire 3 participants 3 messages Dec 19, 2003

lore
Share & tools
lore
#0 lore raw

This is my first bug reporting so sorry if I give you the wrong information... and sorry for my english.

I have a CREATIVE CD-RW 8432 and I get an error when I try to use it aprox 10 minutes after I boot... I can't mount it, or record, etc. When I do dmesg I get this over and over again:

hdc: lost interrupt
hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)

I googled but I didn't find anything about this...

This is the output of ver_linux:
--------------------------------------------
If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes.

Linux GentooBox 2.6.0-gentoo #4 SMP Fri Dec 19 01:21:16 ART 2003 i686 AMD Athlon(tm) XP 2400+ AuthenticAMD GNU/Linux

Gnu C                  3.2.3
Gnu make               3.80
util-linux             2.11z
mount                  2.11z
module-init-tools      0.9.12
e2fsprogs              1.33
PPP                    2.4.1
Linux C Library        2.3.2
Dynamic linker (ldd)   2.3.2
Procps                 3.1.12
Net-tools              1.60
Kbd                    1.06
Sh-utils               5.0
Modules Loaded         snd_seq_midi snd_emu10k1_synth snd_emux_synth 

snd_seq_virmidi snd_seq_midi_emul snd_emu10k1 snd_rawmidi snd_ac97_codec snd_util_mem snd_hwdep snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_pcm snd_page_alloc snd_timer snd_mixer_oss snd soundcore rtc nls_iso8859_1 ntfs w83781d eeprom i2c_isa i2c_sensor i2c_dev i2c_core quickcam videodev hid ehci_hcd uhci_hcd usbcore nvidia 8139too ide_cd cdrom
-------------------------------

I've been using kernel-2.6 since test10 and the bug is there since I tried it...
I've dma enabled but when I disabled it I get the same error..

This is my dmesg:
------------------------------------

Calibrating delay loop... 3858.43 BogoMIPS
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) checking if image is initramfs...it isn't (ungzip failed); looks like an initrd

Freeing initrd memory: 40k freed
CPU:     After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU:     After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU:     After all inits, caps: 0383fbff c1c3fbff 00000000 00000020

Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU0: AMD Athlon(tm) XP 2400+ stepping 01
per-CPU timeslice cutoff: 731.41 usecs.
task migration cache decay timeout: 1 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000080
ESR value after enabling vector: 00000000
Total of 1 processors activated (3858.43 BogoMIPS).
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not
connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
number of MP IRQ sources: 15.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000

.......    : physical APIC id: 02
.......    : Delivery Type: 0
.......    : LTS          : 0
.... register #01: 00178003
.......     : max redirection entries: 0017
.......     : PRQ implemented: 1
.......     : IO APIC version: 0003
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
 00 000 00  1    0    0   0   0    0    0    00
 01 001 01  0    0    0   0   0    1    1    39
 02 001 01  0    0    0   0   0    1    1    31
 03 001 01  0    0    0   0   0    1    1    41
 04 001 01  0    0    0   0   0    1    1    49
 05 001 01  0    0    0   0   0    1    1    51
 06 001 01  0    0    0   0   0    1    1    59
 07 001 01  0    0    0   0   0    1    1    61
 08 001 01  0    0    0   0   0    1    1    69
 09 001 01  1    1    0   1   0    1    1    71
 0a 001 01  0    0    0   0   0    1    1    79
 0b 001 01  0    0    0   0   0    1    1    81
 0c 001 01  0    0    0   0   0    1    1    89
 0d 001 01  0    0    0   0   0    1    1    91
 0e 001 01  0    0    0   0   0    1    1    99
 0f 001 01  0    0    0   0   0    1    1    A1
 10 000 00  1    0    0   0   0    0    0    00
 11 000 00  1    0    0   0   0    0    0    00
 12 000 00  1    0    0   0   0    0    0    00
 13 000 00  1    0    0   0   0    0    0    00
 14 000 00  1    0    0   0   0    0    0    00
 15 000 00  1    0    0   0   0    0    0    00
 16 000 00  1    0    0   0   0    0    0    00
 17 000 00  1    0    0   0   0    0    0    00

IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1960.0714 MHz.
..... host bus clock speed is 340.0993 MHz.
Starting migration thread for cpu 0
CPUS done 8
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20031002
IOAPIC[0]: Set PCI routing entry (2-9 -> 0x71 -> IRQ 9 Mode:1 Active:1)
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 *12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay
IOAPIC[0]: Set PCI routing entry (2-16 -> 0xa9 -> IRQ 16 Mode:1 Active:1) 00:00:01[A] -> 2-16 -> IRQ 16
IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb1 -> IRQ 17 Mode:1 Active:1) 00:00:01[B] -> 2-17 -> IRQ 17
IOAPIC[0]: Set PCI routing entry (2-22 -> 0xb9 -> IRQ 22 Mode:1 Active:1) 00:00:11[C] -> 2-22 -> IRQ 22
Pin 2-16 already programmed
Pin 2-17 already programmed
IOAPIC[0]: Set PCI routing entry (2-18 -> 0xc1 -> IRQ 18 Mode:1 Active:1) 00:00:05[C] -> 2-18 -> IRQ 18
IOAPIC[0]: Set PCI routing entry (2-19 -> 0xc9 -> IRQ 19 Mode:1 Active:1) 00:00:05[D] -> 2-19 -> IRQ 19
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
IOAPIC[0]: Set PCI routing entry (2-21 -> 0xd1 -> IRQ 21 Mode:1 Active:1) 00:00:10[A] -> 2-21 -> IRQ 21
Pin 2-21 already programmed
Pin 2-21 already programmed
Pin 2-21 already programmed
IOAPIC[0]: Set PCI routing entry (2-23 -> 0xd9 -> IRQ 23 Mode:1 Active:1) 00:00:12[A] -> 2-23 -> IRQ 23
Pin 2-18 already programmed
ACPI: No IRQ known for interrupt pin A of device 0000:00:11.1 - using IRQ 255
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
vesafb: framebuffer at 0xd0000000, mapped to 0xd080b000, size 16384k
vesafb: mode is 1024x768x16, linelength=2048, pages=0
vesafb: protected mode interface info at c000:0f3e
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
Machine check exception polling timer started.
devfs: v1.22 (20021013) Richard Gooch ([email protected])
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 [email protected]).
udf: registering filesystem
PCI: Via IRQ fixup for 0000:00:10.1, from 10 to 5
PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 5
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Processor [CPU1] (supports C1, 16 throttling states) bootsplash 3.1.3-2003/11/14: looking for picture.... silentjpeg size 21768 bytes, found (1024x768, 20089 bytes, v3).
Console: switching to colour frame buffer device 122x40
pty: 256 Unix98 ptys configured
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA KT266/KY266x/KT333 chipset
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: AGP aperture is 128M @ 0xe0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: No IRQ known for interrupt pin A of device 0000:00:11.1 - using IRQ 255
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1

    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio

hda: Maxtor 6E040L0, ATA DISK drive
hdb: SAMSUNG SV2044D, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: CREATIVE CD-RW RW8435E, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3
hdb: max request size: 128KiB
hdb: 39862368 sectors (20409 MB) w/472KiB Cache, CHS=39546/16/63, UDMA(66)
/dev/ide/host0/bus0/target1/lun0: p1
Console: switching to colour frame buffer device 122x40
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Translated Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
RAMDISK: Couldn't find valid RAM disk image starting at 0.
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (hda3) for (hda3)
Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 168k freed
Adding 248996k swap on /dev/hda2. Priority:-1 extents:1
hdc: ATAPI 32X CD-ROM CD-R/RW drive, 4096kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
8139too Fast Ethernet driver 0.9.26
eth0: RealTek RTL8139 at 0xd1a95f00, 00:e0:7d:db:05:59, IRQ 17
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
nvidia: no version magic, tainting kernel.
nvidia: module license 'NVIDIA' taints kernel.
0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-4496 Wed Jul 16 19:03:09 PDT 2003
drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: irq 21, io base 0000dc00
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: irq 21, io base 0000e000
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: irq 21, io base 0000e400
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci_hcd 0000:00:10.3: EHCI Host Controller
ehci_hcd 0000:00:10.3: irq 21, pci mem d1a97e00
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 ehci_hcd 0000:00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-13 hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Linux video capture interface: v1.00
quickcam: no version magic, tainting kernel.
quickcam [49.207223]: ----------LOADING QUICKCAM MODULE------------ quickcam [49.207228]: struct quickcam size: 5548 drivers/usb/core/usb.c: registered new driver quickcam
i2c /dev entries driver
registering 0-0290
NTFS driver 2.1.5 [Flags: R/O MODULE].
NTFS volume version 3.0.
hub 1-0:1.0: new USB device on port 1, assigned address 2
quickcam: QuickCam USB camera found (driver version QuickCam USB $Date:
2003/10/30 11:16:49 $)
Module quickcam cannot be unloaded due to unsafe usage in include/linux/module.h:483
quickcam: Sensor HDCS-1000/1100 detected
videodev: "QuickCam USB" has no release callback. Please fix your driver for proper sysfs support, see http://lwn.net/Articles/36850/
hub 1-0:1.0: new USB device on port 2, assigned address 3
input: USB HID v1.00 Mouse [HP HP USB WHEEL MOUSE] on usb-0000:00:10.0-2 Real Time Clock Driver v1.12
blk: queue cfc5ae00, I/O limit 4095Mb (mask 0xffffffff)
blk: queue cfc5aa00, I/O limit 4095Mb (mask 0xffffffff)
eth0: link up, 10Mbps, half-duplex, lpa 0x0000
bootsplash 3.1.3-2003/11/14: looking for picture.... found (1024x768, 20089 bytes, v3).
bootsplash: status on console 0 changed to on
bootsplash 3.1.3-2003/11/14: looking for picture.... found (1024x768, 20089 bytes, v3).
bootsplash: status on console 1 changed to on
bootsplash 3.1.3-2003/11/14: looking for picture.... found (1024x768, 20089 bytes, v3).
bootsplash: status on console 2 changed to on
bootsplash 3.1.3-2003/11/14: looking for picture.... found (1024x768, 20089 bytes, v3).
bootsplash: status on console 3 changed to on
bootsplash 3.1.3-2003/11/14: looking for picture.... found (1024x768, 20089 bytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.3-2003/11/14: looking for picture.... found (1024x768, 20089 bytes, v3).
bootsplash: status on console 5 changed to on
Debug: sleeping function called from invalid context at mm/slab.c:1856 in_atomic():1, irqs_disabled():0

Call Trace:
 [<c0122a2b>] __might_sleep+0xab/0xd0
 [<c0149340>] kmem_cache_alloc+0x70/0x80
 [<c0159661>] __get_vm_area+0x21/0x150
 [<c01597c3>] get_vm_area+0x33/0x40
 [<c011e6a3>] __ioremap+0xb3/0x100
 [<c0145492>] buffered_rmqueue+0xe2/0x190
 [<c011e719>] ioremap_nocache+0x29/0xb0
 [<d1c9169a>] os_map_kernel_space+0x68/0x6c [nvidia]
 [<c01595db>] map_vm_area+0x6b/0xd0
 [<d1ca3ce7>] __nvsym00568+0x1f/0x2c [nvidia]
 [<d1ca5e06>] __nvsym00775+0x6e/0xe0 [nvidia]
 [<d1ca5e96>] __nvsym00781+0x1e/0x190 [nvidia]
 [<d1ca791c>] rm_init_adapter+0xc/0x10 [nvidia]
 [<d1c8de48>] nv_kern_open+0x122/0x26d [nvidia]
 [<c016943c>] chrdev_open+0x12c/0x2c0
 [<c01cb34e>] devfs_open+0x11e/0x140
 [<c015e7ca>] dentry_open+0x15a/0x240
 [<c015e666>] filp_open+0x66/0x70
 [<c015ebb3>] sys_open+0x53/0x90
 [<c010b69b>] syscall_call+0x7/0xb

Debug: sleeping function called from invalid context at mm/slab.c:1856 in_atomic():1, irqs_disabled():0

Call Trace:
 [<c0122a2b>] __might_sleep+0xab/0xd0
 [<c028baef>] generic_unplug_device+0x8f/0xa0
 [<c0149340>] kmem_cache_alloc+0x70/0x80
 [<c0159661>] __get_vm_area+0x21/0x150
 [<c01597c3>] get_vm_area+0x33/0x40
 [<c011e6a3>] __ioremap+0xb3/0x100
 [<c0145492>] buffered_rmqueue+0xe2/0x190
 [<c011e719>] ioremap_nocache+0x29/0xb0
 [<d1c9169a>] os_map_kernel_space+0x68/0x6c [nvidia]
 [<c01595db>] map_vm_area+0x6b/0xd0
 [<d1ca3ce7>] __nvsym00568+0x1f/0x2c [nvidia]
 [<d1ca5e06>] __nvsym00775+0x6e/0xe0 [nvidia]
 [<d1ca5e96>] __nvsym00781+0x1e/0x190 [nvidia]
 [<d1ca791c>] rm_init_adapter+0xc/0x10 [nvidia]
 [<d1c8de48>] nv_kern_open+0x122/0x26d [nvidia]
 [<c016943c>] chrdev_open+0x12c/0x2c0
 [<c01cb34e>] devfs_open+0x11e/0x140
 [<c015e7ca>] dentry_open+0x15a/0x240
 [<c015e666>] filp_open+0x66/0x70
 [<c015ebb3>] sys_open+0x53/0x90
 [<c010b69b>] syscall_call+0x7/0xb

agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode

hdc: lost interrupt
hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
hdc: lost interrupt
hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
hdc: lost interrupt
hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
hdc: lost interrupt
hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
hdc: lost interrupt
hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
hdc: lost interrupt

----------------------
I hope that help...

#1 lore raw
Quoted 405 lines · Federico Freire

This is my first bug reporting so sorry if I give you the wrong information... and sorry for my english.

I have a CREATIVE CD-RW 8432 and I get an error when I try to use it aprox 10 minutes after I boot... I can't mount it, or record, etc. When I do dmesg I get this over and over again:

hdc: lost interrupt
hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)

I googled but I didn't find anything about this...

This is the output of ver_linux:
--------------------------------------------
If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes.

Linux GentooBox 2.6.0-gentoo #4 SMP Fri Dec 19 01:21:16 ART 2003 i686 AMD Athlon(tm) XP 2400+ AuthenticAMD GNU/Linux

Gnu C                  3.2.3
Gnu make               3.80
util-linux             2.11z
mount                  2.11z
module-init-tools      0.9.12
e2fsprogs              1.33
PPP                    2.4.1
Linux C Library        2.3.2
Dynamic linker (ldd)   2.3.2
Procps                 3.1.12
Net-tools              1.60
Kbd                    1.06
Sh-utils               5.0
Modules Loaded         snd_seq_midi snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_emul snd_emu10k1 snd_rawmidi snd_ac97_codec snd_util_mem snd_hwdep snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_pcm snd_page_alloc snd_timer snd_mixer_oss snd soundcore rtc nls_iso8859_1 ntfs w83781d eeprom i2c_isa i2c_sensor i2c_dev i2c_core quickcam videodev hid ehci_hcd uhci_hcd usbcore nvidia 8139too ide_cd cdrom

-------------------------------

I've been using kernel-2.6 since test10 and the bug is there since I tried it... I've dma enabled but when I disabled it I get the same error..

This is my dmesg:
------------------------------------

Calibrating delay loop... 3858.43 BogoMIPS
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) checking if image is initramfs...it isn't (ungzip failed); looks like an initrd

Freeing initrd memory: 40k freed
CPU:     After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU:     After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU:     After all inits, caps: 0383fbff c1c3fbff 00000000 00000020

Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU0: AMD Athlon(tm) XP 2400+ stepping 01
per-CPU timeslice cutoff: 731.41 usecs.
task migration cache decay timeout: 1 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000080
ESR value after enabling vector: 00000000
Total of 1 processors activated (3858.43 BogoMIPS).
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=-1
number of MP IRQ sources: 15.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000

.......    : physical APIC id: 02
.......    : Delivery Type: 0
.......    : LTS          : 0
.... register #01: 00178003
.......     : max redirection entries: 0017
.......     : PRQ implemented: 1
.......     : IO APIC version: 0003
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00  1    0    0   0   0    0    0    00
01 001 01  0    0    0   0   0    1    1    39
02 001 01  0    0    0   0   0    1    1    31
03 001 01  0    0    0   0   0    1    1    41
04 001 01  0    0    0   0   0    1    1    49
05 001 01  0    0    0   0   0    1    1    51
06 001 01  0    0    0   0   0    1    1    59
07 001 01  0    0    0   0   0    1    1    61
08 001 01  0    0    0   0   0    1    1    69
09 001 01  1    1    0   1   0    1    1    71
0a 001 01  0    0    0   0   0    1    1    79
0b 001 01  0    0    0   0   0    1    1    81
0c 001 01  0    0    0   0   0    1    1    89
0d 001 01  0    0    0   0   0    1    1    91
0e 001 01  0    0    0   0   0    1    1    99
0f 001 01  0    0    0   0   0    1    1    A1
10 000 00  1    0    0   0   0    0    0    00
11 000 00  1    0    0   0   0    0    0    00
12 000 00  1    0    0   0   0    0    0    00
13 000 00  1    0    0   0   0    0    0    00
14 000 00  1    0    0   0   0    0    0    00
15 000 00  1    0    0   0   0    0    0    00
16 000 00  1    0    0   0   0    0    0    00
17 000 00  1    0    0   0   0    0    0    00

IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1960.0714 MHz.
..... host bus clock speed is 340.0993 MHz.
Starting migration thread for cpu 0
CPUS done 8
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20031002
IOAPIC[0]: Set PCI routing entry (2-9 -> 0x71 -> IRQ 9 Mode:1 Active:1)
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 *12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
IOAPIC[0]: Set PCI routing entry (2-16 -> 0xa9 -> IRQ 16 Mode:1 Active:1)
00:00:01[A] -> 2-16 -> IRQ 16
IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb1 -> IRQ 17 Mode:1 Active:1)
00:00:01[B] -> 2-17 -> IRQ 17
IOAPIC[0]: Set PCI routing entry (2-22 -> 0xb9 -> IRQ 22 Mode:1 Active:1)
00:00:11[C] -> 2-22 -> IRQ 22
Pin 2-16 already programmed
Pin 2-17 already programmed
IOAPIC[0]: Set PCI routing entry (2-18 -> 0xc1 -> IRQ 18 Mode:1 Active:1)
00:00:05[C] -> 2-18 -> IRQ 18
IOAPIC[0]: Set PCI routing entry (2-19 -> 0xc9 -> IRQ 19 Mode:1 Active:1)
00:00:05[D] -> 2-19 -> IRQ 19
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
IOAPIC[0]: Set PCI routing entry (2-21 -> 0xd1 -> IRQ 21 Mode:1 Active:1)
00:00:10[A] -> 2-21 -> IRQ 21
Pin 2-21 already programmed
Pin 2-21 already programmed
Pin 2-21 already programmed
IOAPIC[0]: Set PCI routing entry (2-23 -> 0xd9 -> IRQ 23 Mode:1 Active:1)
00:00:12[A] -> 2-23 -> IRQ 23
Pin 2-18 already programmed
ACPI: No IRQ known for interrupt pin A of device 0000:00:11.1 - using IRQ 255
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
vesafb: framebuffer at 0xd0000000, mapped to 0xd080b000, size 16384k
vesafb: mode is 1024x768x16, linelength=2048, pages=0
vesafb: protected mode interface info at c000:0f3e
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
Machine check exception polling timer started.
devfs: v1.22 (20021013) Richard Gooch ([email protected])
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 [email protected]).
udf: registering filesystem
PCI: Via IRQ fixup for 0000:00:10.1, from 10 to 5
PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 5
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Processor [CPU1] (supports C1, 16 throttling states)
bootsplash 3.1.3-2003/11/14: looking for picture.... silentjpeg size 21768 bytes, found (1024x768, 20089 bytes, v3).
Console: switching to colour frame buffer device 122x40
pty: 256 Unix98 ptys configured
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA KT266/KY266x/KT333 chipset
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: AGP aperture is 128M @ 0xe0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: No IRQ known for interrupt pin A of device 0000:00:11.1 - using IRQ 255
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
hda: Maxtor 6E040L0, ATA DISK drive
hdb: SAMSUNG SV2044D, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: CREATIVE CD-RW RW8435E, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3
hdb: max request size: 128KiB
hdb: 39862368 sectors (20409 MB) w/472KiB Cache, CHS=39546/16/63, UDMA(66)
/dev/ide/host0/bus0/target1/lun0: p1
Console: switching to colour frame buffer device 122x40
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Translated Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
RAMDISK: Couldn't find valid RAM disk image starting at 0.
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (hda3) for (hda3)
Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 168k freed
Adding 248996k swap on /dev/hda2. Priority:-1 extents:1
hdc: ATAPI 32X CD-ROM CD-R/RW drive, 4096kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
8139too Fast Ethernet driver 0.9.26
eth0: RealTek RTL8139 at 0xd1a95f00, 00:e0:7d:db:05:59, IRQ 17
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
nvidia: no version magic, tainting kernel.
nvidia: module license 'NVIDIA' taints kernel.
0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-4496 Wed Jul 16 19:03:09 PDT 2003 drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: irq 21, io base 0000dc00
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: irq 21, io base 0000e000
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: irq 21, io base 0000e400
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci_hcd 0000:00:10.3: EHCI Host Controller
ehci_hcd 0000:00:10.3: irq 21, pci mem d1a97e00
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-13
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Linux video capture interface: v1.00
quickcam: no version magic, tainting kernel.
quickcam [49.207223]: ----------LOADING QUICKCAM MODULE------------
quickcam [49.207228]: struct quickcam size: 5548
drivers/usb/core/usb.c: registered new driver quickcam
i2c /dev entries driver
registering 0-0290
NTFS driver 2.1.5 [Flags: R/O MODULE].
NTFS volume version 3.0.
hub 1-0:1.0: new USB device on port 1, assigned address 2
quickcam: QuickCam USB camera found (driver version QuickCam USB $Date: 2003/10/30 11:16:49 $)
Module quickcam cannot be unloaded due to unsafe usage in include/linux/module.h:483
quickcam: Sensor HDCS-1000/1100 detected
videodev: "QuickCam USB" has no release callback. Please fix your driver for proper sysfs support, see http://lwn.net/Articles/36850/
hub 1-0:1.0: new USB device on port 2, assigned address 3
input: USB HID v1.00 Mouse [HP HP USB WHEEL MOUSE] on usb-0000:00:10.0-2
Real Time Clock Driver v1.12
blk: queue cfc5ae00, I/O limit 4095Mb (mask 0xffffffff)
blk: queue cfc5aa00, I/O limit 4095Mb (mask 0xffffffff)
eth0: link up, 10Mbps, half-duplex, lpa 0x0000
bootsplash 3.1.3-2003/11/14: looking for picture.... found (1024x768, 20089 bytes, v3).
bootsplash: status on console 0 changed to on
bootsplash 3.1.3-2003/11/14: looking for picture.... found (1024x768, 20089 bytes, v3).
bootsplash: status on console 1 changed to on
bootsplash 3.1.3-2003/11/14: looking for picture.... found (1024x768, 20089 bytes, v3).
bootsplash: status on console 2 changed to on
bootsplash 3.1.3-2003/11/14: looking for picture.... found (1024x768, 20089 bytes, v3).
bootsplash: status on console 3 changed to on
bootsplash 3.1.3-2003/11/14: looking for picture.... found (1024x768, 20089 bytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.3-2003/11/14: looking for picture.... found (1024x768, 20089 bytes, v3).
bootsplash: status on console 5 changed to on
Debug: sleeping function called from invalid context at mm/slab.c:1856
in_atomic():1, irqs_disabled():0

Call Trace:
[<c0122a2b>] __might_sleep+0xab/0xd0
[<c0149340>] kmem_cache_alloc+0x70/0x80
[<c0159661>] __get_vm_area+0x21/0x150
[<c01597c3>] get_vm_area+0x33/0x40
[<c011e6a3>] __ioremap+0xb3/0x100
[<c0145492>] buffered_rmqueue+0xe2/0x190
[<c011e719>] ioremap_nocache+0x29/0xb0
[<d1c9169a>] os_map_kernel_space+0x68/0x6c [nvidia]
[<c01595db>] map_vm_area+0x6b/0xd0
[<d1ca3ce7>] __nvsym00568+0x1f/0x2c [nvidia]
[<d1ca5e06>] __nvsym00775+0x6e/0xe0 [nvidia]
[<d1ca5e96>] __nvsym00781+0x1e/0x190 [nvidia]
[<d1ca791c>] rm_init_adapter+0xc/0x10 [nvidia]
[<d1c8de48>] nv_kern_open+0x122/0x26d [nvidia]
[<c016943c>] chrdev_open+0x12c/0x2c0
[<c01cb34e>] devfs_open+0x11e/0x140
[<c015e7ca>] dentry_open+0x15a/0x240
[<c015e666>] filp_open+0x66/0x70
[<c015ebb3>] sys_open+0x53/0x90
[<c010b69b>] syscall_call+0x7/0xb

Debug: sleeping function called from invalid context at mm/slab.c:1856 in_atomic():1, irqs_disabled():0

Call Trace:
[<c0122a2b>] __might_sleep+0xab/0xd0
[<c028baef>] generic_unplug_device+0x8f/0xa0
[<c0149340>] kmem_cache_alloc+0x70/0x80
[<c0159661>] __get_vm_area+0x21/0x150
[<c01597c3>] get_vm_area+0x33/0x40
[<c011e6a3>] __ioremap+0xb3/0x100
[<c0145492>] buffered_rmqueue+0xe2/0x190
[<c011e719>] ioremap_nocache+0x29/0xb0
[<d1c9169a>] os_map_kernel_space+0x68/0x6c [nvidia]
[<c01595db>] map_vm_area+0x6b/0xd0
[<d1ca3ce7>] __nvsym00568+0x1f/0x2c [nvidia]
[<d1ca5e06>] __nvsym00775+0x6e/0xe0 [nvidia]
[<d1ca5e96>] __nvsym00781+0x1e/0x190 [nvidia]
[<d1ca791c>] rm_init_adapter+0xc/0x10 [nvidia]
[<d1c8de48>] nv_kern_open+0x122/0x26d [nvidia]
[<c016943c>] chrdev_open+0x12c/0x2c0
[<c01cb34e>] devfs_open+0x11e/0x140
[<c015e7ca>] dentry_open+0x15a/0x240
[<c015e666>] filp_open+0x66/0x70
[<c015ebb3>] sys_open+0x53/0x90
[<c010b69b>] syscall_call+0x7/0xb

agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode

hdc: lost interrupt
hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
hdc: lost interrupt
hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
hdc: lost interrupt
hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
hdc: lost interrupt
hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
hdc: lost interrupt
hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
hdc: lost interrupt

----------------------
I hope that help...

Quoted 8 lines

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Did you try to mount /dev/cdrom or /dev/hdc ? because your CD-R/RW drive is set as hdc...

Quoted 2 lines
Quoted 1 line
Quoted 1 line

hdc: ATAPI 32X CD-ROM CD-R/RW drive, 4096kB Cache, DMA

#2 lore raw
Quoted 5 lines · Jean-Philippe Woot de Trixhe

Federico Freire wrote:
[ as much as 443 (repeat, 443) lines of unnecessary quotation removed ] Did you try to mount /dev/cdrom or /dev/hdc ? because your CD-R/RW drive is set as hdc...

Was it _really_ necessary to waste several thousand times 18 KiB in ASCII text quoted from the original message just to add two new lines of text ?. Please, trim replies to the absolutely necessary length.

PS: 4000 subscribers times 18 KiB gives more than 70 MiB

Greetings.

Signature · 2 lines
Jose Luis Domingo Lopez
Linux Registered User #189436     Debian Linux Sid (Linux 2.6.0)