Skip to contentSkip to conversation

longhaul trouble

2.6.0 cpufreq Jurgen Kramer 2 participants 3 messages Dec 19, 2003 – Dec 20, 2003

lore
Share & tools
lore
#0 lore raw

When I insert the longhaul cpufreq module on my VIA EPIA 800 the system completely freezes. It does not give any oops or other helpful error message.

Through ACPI I can only use the throttling function, I can not switch between 400 and 800 MHz.

Jurgen

output of /proc/cpu

processor : 0
vendor_id : CentaurHauls
cpu family : 6
model : 7
model name : VIA Ezra
stepping : 8
cpu MHz : 800.048
cache size : 64 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu de tsc msr cx8 mtrr pge mmx 3dnow
bogomips : 1595.80

#1 lore raw
Quoted 4 lines · Jurgen Kramer

When I insert the longhaul cpufreq module on my VIA EPIA 800 the system completely freezes. It does not give any oops or other helpful error message.

Does this help ?

Dave

arch/i386/kernel/cpu/cpufreq/longhaul.c +9 -2
diff -urpN --exclude-from=/home/davej/.exclude bk-linus/arch/i386/kernel/cpu/cpufreq/longhaul.c cpufreq/arch/i386/kernel/cpu/cpufreq/longhaul.c
@@ -170,6 +170,9 @@ static void longhaul_setstate (unsigned 
  * between that value multiplied by possible FSBs and cpu_mhz which
  * was calculated at boot time. Really ugly, but no other way to do this.
  */
+
+#define ROUNDING	0xf
+
 static int _guess (int guess, int maxmult)
 {
 	int target;
@@ -177,16 +180,20 @@ static int _guess (int guess, int maxmul
 	target = ((maxmult/10)*guess);
 	if (maxmult%10 != 0)
 		target += (guess/2);
-	target &= ~0xf;
+	target += ROUNDING/2;
+	target &= ~ROUNDING;
 	return target;
 }
 
 static int guess_fsb(int maxmult)
 {
-	int speed = (cpu_khz/1000) & ~0xf;
+	int speed = (cpu_khz/1000);
 	int i;
 	int speeds[3] = { 66, 100, 133 };
 
+	speed += ROUNDING/2;
+	speed &= ~ROUNDING;
+
 	for (i=0; i<3; i++) {
 		if (_guess(speeds[i],maxmult) == speed)
 			return speeds[i];
#2 lore raw

Yes it does!

from dmesg:

longhaul: VIA C3 'Ezra' [C5C] CPU detected. Longhaul v1 supported.
longhaul: MinMult=3.0x MaxMult=6.0x
longhaul: FSB: 133MHz Lowestspeed=399MHz Highestspeed=798MHz

from /sys/devices/system/cpu/cpu0/cpufreq:

::::::::::::::
cpuinfo_max_freq
::::::::::::::
798
::::::::::::::
cpuinfo_min_freq
::::::::::::::
399
::::::::::::::
scaling_available_governors
::::::::::::::
performance
::::::::::::::
scaling_driver
::::::::::::::
longhaul
::::::::::::::
scaling_governor
::::::::::::::
performance
::::::::::::::
scaling_max_freq
::::::::::::::
798
::::::::::::::
scaling_min_freq
::::::::::::::
399

Next step is to actually change the frequency. I am not really sure how to do that with sysfs yet.

Cheers,

Jurgen