Skip to contentSkip to conversation

problem with usb duo mouse and keyboard

DISCUSSION Raul Miller 2 participants 5 messages Dec 21, 2003 – Dec 22, 2003 3 messages not in the archive

lore
Share & tools
lore
#0 lore raw

Linux 2.6.0 (and 2.6.0-test11) appears to have a significant problem with the mouse of the logitech 700mx duo when it's plugged in using usb.

The mouse works fine* when plugged in using the ps/2 mouse connector, and the keyboard works ok even when plugged in using usb. However, when using usb:

o   horizontal mouse movement is interpreted as vertical movement 
o   vertical mouse movement is ignored 
o   strange things happen with mouse button presses (I didn't bother

working with this configuration long enough to figure out the details).

This occurs under both x and gpm, which is mild evidence that it's not a user space problem.

It might also be worth noting that some of the extra keys on the keyboard do odd mouse-like things (like move the mouse's pointer horizontally a short distance) when it's a usb keyboard. However, these keys work reasonably normally (or, in two cases**, generate entries in syslog) when it's plugged in as a ps/2 keyboard.

My guess is that the respective usb drivers haven't taken into account that both a keyboard and a mouse might appear on the same physical connection. [But I'm still coming up to speed, and haven't yet figured out how to confirm/disprove that guess.]

Signature · 22 lines
Raul Miller
[email protected]


* one mouse button is ignored, however it is so awkwardly placed that I
doubt anyone would want to use it.


** the syslog entries from the unsupported keys:

Dec 21 15:28:07 localhost kernel: atkbd.c: Unknown key pressed (translated set 2, code 0x11d, data 0x11, on isa0060/serio0).
Dec 21 15:28:07 localhost kernel: atkbd.c: Unknown key released (translated set
2, code 0x11d, data 0x91, on isa0060/serio0).
Dec 21 15:28:10 localhost kernel: atkbd.c: Unknown key pressed (translated set 2, code 0x12c, data 0x14, on isa0060/serio0).
Dec 21 15:28:10 localhost kernel: atkbd.c: Unknown key released (translated set
2, code 0x12c, data 0x94, on isa0060/serio0).

Perhaps it's also worth noting that most of the other extra keys send two
byte sequences when pressed (as reported by showkey -s), and showkey -k
seems to be reporting the extra information as extra key releases, I think
I've seen something similar on other keyboards, but I don't have one of
those handy to test on).  If anyone cares, I can document this for them.
#1 lore raw
Quoted 22 lines · Raul Miller

Linux 2.6.0 (and 2.6.0-test11) appears to have a significant problem with the mouse of the logitech 700mx duo when it's plugged in using usb.

The mouse works fine* when plugged in using the ps/2 mouse connector, and the keyboard works ok even when plugged in using usb. However, when using usb:

o   horizontal mouse movement is interpreted as vertical movement 
o   vertical mouse movement is ignored 
o   strange things happen with mouse button presses (I didn't bother

working with this configuration long enough to figure out the details).

This occurs under both x and gpm, which is mild evidence that it's not a user space problem.

It might also be worth noting that some of the extra keys on the keyboard do odd mouse-like things (like move the mouse's pointer horizontally a short distance) when it's a usb keyboard. However, these keys work reasonably normally (or, in two cases**, generate entries in syslog) when it's plugged in as a ps/2 keyboard.

Quoted 4 lines

My guess is that the respective usb drivers haven't taken into account that both a keyboard and a mouse might appear on the same physical connection. [But I'm still coming up to speed, and haven't yet figured out how to confirm/disprove that guess.]

They do take that into account. It's just that the descriptors are maybe too complex. Could you possibly enable DEBUG in hid-core.c and send me the output?

Quoted 28 lines
Signature · 27 lines
Raul Miller
[email protected]


* one mouse button is ignored, however it is so awkwardly placed that I
doubt anyone would want to use it.


** the syslog entries from the unsupported keys:

Dec 21 15:28:07 localhost kernel: atkbd.c: Unknown key pressed (translated set 2, code 0x11d, data 0x11, on isa0060/serio0).
Dec 21 15:28:07 localhost kernel: atkbd.c: Unknown key released (translated set
2, code 0x11d, data 0x91, on isa0060/serio0).
Dec 21 15:28:10 localhost kernel: atkbd.c: Unknown key pressed (translated set 2, code 0x12c, data 0x14, on isa0060/serio0).
Dec 21 15:28:10 localhost kernel: atkbd.c: Unknown key released (translated set
2, code 0x12c, data 0x94, on isa0060/serio0).

Perhaps it's also worth noting that most of the other extra keys send two
byte sequences when pressed (as reported by showkey -s), and showkey -k
seems to be reporting the extra information as extra key releases, I think
I've seen something similar on other keyboards, but I don't have one of
those handy to test on).  If anyone cares, I can document this for them.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/
Signature · 2 lines
Vojtech Pavlik
SuSE Labs, SuSE CR
#2 lore raw
Quoted 3 lines · Vojtech Pavlik

They do take that into account. It's just that the descriptors are maybe too complex. Could you possibly enable DEBUG in hid-core.c and send me the output?

I've defined DEBUG in hid-core.c, and booted with the logitech keyboard/mouse transceiver plugged in using usb (I'm using a different keyboard and mouse to run the system) but I don't see any new messages. Do I also need to define DEBUG_DATA? Or are there some special tests I need to ruN?

As an aside, I have spotted a few messages which might be relevant which I was getting even before I booted with this kernel instance:

Dec 21 16:55:51 localhost input.agent[283]: ... no modules for INPUT product 3/46d/c50b/2100
Dec 21 16:55:51 localhost input.agent[294]: ... no modules for INPUT product 3/46d/c50b/2100
Dec 21 16:55:51 localhost modprobe: FATAL: Module hid already in kernel.
Dec 21 16:55:51 localhost usb.agent[276]: kernel driver usbkbd already loaded
Dec 21 16:55:51 localhost kernel: drivers/usb/core/usb.c: registered new driver
hiddev
Dec 21 16:55:51 localhost kernel: drivers/usb/core/usb.c: registered new driver
hid
Dec 21 16:55:51 localhost kernel: drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Dec 21 16:55:51 localhost usb.agent[284]: kernel driver usbmouse already loaded

Hmm...

Ok, I can get messages to show up in syslog if I use lsusb. Here's what I get:

Dec 21 17:01:45 localhost kernel: usbfs: USBDEVFS_CONTROL failed cmd lsusb dev 2 rqt 128 rq 6 len 63 ret -32
Dec 21 17:01:45 localhost kernel: usbfs: USBDEVFS_CONTROL failed cmd lsusb dev 2 rqt 128 rq 6 len 190 ret -32
Dec 21 17:01:59 localhost kernel: usbfs: USBDEVFS_CONTROL failed cmd lsusb dev 2 rqt 128 rq 6 len 63 ret -32
Dec 21 17:01:59 localhost kernel: usbfs: USBDEVFS_CONTROL failed cmd lsusb dev 2 rqt 128 rq 6 len 190 ret -32
Dec 21 17:02:18 localhost kernel: usbfs: USBDEVFS_CONTROL failed cmd lsusb dev 2 rqt 128 rq 6 len 63 ret -32
Dec 21 17:02:18 localhost kernel: usbfs: USBDEVFS_CONTROL failed cmd lsusb dev 2 rqt 128 rq 6 len 190 ret -32

Also, I'm appending the output of lsusb -vv to the bottom of this message.

Let me know if there's anything else I can do.

Thanks,

Signature · 232 lines
Raul Miller
[email protected]


Bus 003 Device 001: ID 0000:0000  
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0         8
  idVendor           0x0000 
  idProduct          0x0000 
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.0 uhci_hcd
  iProduct                2 UHCI Host Controller
  iSerial                 1 0000:00:10.2
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0x40
      Self Powered
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               none
        wMaxPacketSize          2
        bInterval             255
  Language IDs: (length=4)
     0409 English(US)

Bus 002 Device 002: ID 046d:c50b Logitech, Inc. 
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0         8
  idVendor           0x046d Logitech, Inc.
  idProduct          0xc50b 
  bcdDevice           21.00
  iManufacturer           1 Logitech
  iProduct                2 USB Receiver
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           59
    bNumInterfaces          2
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xa0
      Remote Wakeup
    MaxPower               98mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Devices
      bInterfaceSubClass      1 Boot Interface Subclass
      bInterfaceProtocol      1 Keyboard
      iInterface              0 
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.10
          bCountryCode            0
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength      63
cannot get report descriptor
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               none
        wMaxPacketSize          8
        bInterval              10
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Devices
      bInterfaceSubClass      1 Boot Interface Subclass
      bInterfaceProtocol      2 Mouse
      iInterface              0 
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.10
          bCountryCode            0
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength     190
cannot get report descriptor
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               none
        wMaxPacketSize          8
        bInterval              10
  Language IDs: (length=4)
     0409 English(US)

Bus 002 Device 001: ID 0000:0000  
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0         8
  idVendor           0x0000 
  idProduct          0x0000 
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.0 uhci_hcd
  iProduct                2 UHCI Host Controller
  iSerial                 1 0000:00:10.1
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0x40
      Self Powered
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               none
        wMaxPacketSize          2
        bInterval             255
  Language IDs: (length=4)
     0409 English(US)

Bus 001 Device 001: ID 0000:0000  
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0         8
  idVendor           0x0000 
  idProduct          0x0000 
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.0 uhci_hcd
  iProduct                2 UHCI Host Controller
  iSerial                 1 0000:00:10.0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0x40
      Self Powered
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               none
        wMaxPacketSize          2
        bInterval             255
  Language IDs: (length=4)
     0409 English(US)

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

#6 lore raw

Re: user problem with usb duo mouse and keyboard

Quoted 3 lines · Vojtech Pavlik

hid-core.c includes hid.h, which in turn, if DEBUG is defined, includes hid-debug.h. That last file defines some functions (hid_dump_input, hid_dump_device), which are called by hid-core.c.

...

Quoted 2 lines

This is the problem! Don't ever use usbkbd and usbmouse. Use hid instead.

Oh!

And, looking at the docs on those modules, I see nice big warnings that say something similar...

Looking further, these modules where build and installed by default when I installed my system (debian, with the 2.4.18-bf2.4 kernel), and I've been carrying forward that configuration on my hand-built kernels, and never realized I needed to get rid of those modules.

I see the hid-debug messages in syslog now, but the keyboard and mouse are working properly as well. Do you want to pursue this any further? [If so, I can send you the messages.]

[It's perhaps of note that the extra keys on the keyboard are reported as scancode 0 by showkey (with other release scan codes) when plugged in via usb and which have different keypress scan codss when plugged as a ps/2 keyboard.]

[[There's a slight chance that [to avoid confused messages from other people in my situation] a warning message from hid about usbkbd and usbmouse would be a good idea.]]

Thank you very much.

Sorry about the confusion,

Signature · 2 lines
Raul Miller
[email protected]
#7 lore raw

Re: user problem with usb duo mouse and keyboard

Quoted 13 lines · Raul Miller
Quoted 3 lines · Vojtech Pavlik

hid-core.c includes hid.h, which in turn, if DEBUG is defined, includes hid-debug.h. That last file defines some functions (hid_dump_input, hid_dump_device), which are called by hid-core.c.

...

Quoted 2 lines

This is the problem! Don't ever use usbkbd and usbmouse. Use hid instead.

Oh!

And, looking at the docs on those modules, I see nice big warnings that say something similar...

Quoted 8 lines

Looking further, these modules where build and installed by default when I installed my system (debian, with the 2.4.18-bf2.4 kernel), and I've been carrying forward that configuration on my hand-built kernels, and never realized I needed to get rid of those modules.

I see the hid-debug messages in syslog now, but the keyboard and mouse are working properly as well. Do you want to pursue this any further? [If so, I can send you the messages.]

If they are working, then no.

Quoted 2 lines

[It's perhaps of note that the extra keys on the keyboard are reported as scancode 0 by showkey (with other release scan codes) when plugged

This is normal. This is because the keycodes are above 128 and that's all that you can fit into a single signed byte.

Quoted 2 lines

in via usb and which have different keypress scan codss when plugged as a ps/2 keyboard.]

This is also normal and can be fixed via the setkeycodes utility. The driver cannot be preconfigured for every PS/2 keyboard out there, because their scancodes conflict. On USB the configuration is static, because USB carries much more information about the keys.

Quoted 3 lines

[[There's a slight chance that [to avoid confused messages from other people in my situation] a warning message from hid about usbkbd and usbmouse would be a good idea.]]

Maybe. But fortunately current distros get it right.

Quoted 2 lines

Thank you very much.
Sorry about the confusion,

Signature · 2 lines
Vojtech Pavlik
SuSE Labs, SuSE CR