Skip to contentSkip to conversation

Oops with 2.4.23

DISCUSSION Xose Vazquez Perez 4 participants 7 messages Dec 22, 2003 – Dec 28, 2003

lore
Share & tools
lore
#0 lore raw
Quoted 3 lines · Arnaud Fontaine

Sorry, i forgot to tell if i had error. So after 11 pass, i have had no error. I have also test with cpuburn which printed nothing after 30 minutes.

disable the SWAP, and run three burnMMX for 30 minutes:

# swapoff -a
$ ./burnMMX P || echo $? &
#1 lore raw
Quoted 7 lines · Xose Vazquez Perez
Quoted 3 lines · Arnaud Fontaine

Sorry, i forgot to tell if i had error. So after 11 pass, i have had no error. I have also test with cpuburn which printed nothing after 30 minutes.

disable the SWAP, and run three burnMMX for 30 minutes:

How does disabling swap help?

#2 lore raw
Quoted 1 line · Mike Fedyk

How does disabling swap help?

It helps to not test the SWAP memory :-). Really the important thing is 'P' flag in burnMMX. Otherwise it will test _only_ the cache memory of the processor.

#3 lore raw
In reply to Xose Vazquez Perez
Quoted 8 lines · Xose Vazquez Perez
Quoted 3 lines

Sorry, i forgot to tell if i had error. So after 11 pass, i have had no error. I have also test with cpuburn which printed nothing after 30 minutes.

disable the SWAP, and run three burnMMX for 30 minutes:

# swapoff -a
$ ./burnMMX P || echo $? &

Hello,

Do i ran burnMMX during more than 30 minutes and nothing reported. Do you have an other idea ?

Thanks for your help.
Arnaud

Signature · 7 lines
Arnaud Fontaine <[email protected]> - http://www.andesi.org/
GnuPG Public Key available on pgp.mit.edu
Fingerprint: D792 B8A5 A567 B001 C342 2613 BDF2 A220 5E36 19D3

--
Make sure input cannot violate the limits of the program.
            - The Elements of Programming Style (Kernighan & Plaugher)
#4 lore raw
Quoted 2 lines · Arnaud Fontaine

Do i ran burnMMX during more than 30 minutes and nothing reported. Do you have an other idea ?

next steps :

- run burnP5 for 30 min.
- try 2.4.24-pre2

#5 lore raw
Quoted 4 lines · Xose Vazquez Perez

next steps :

- run burnP5 for 30 min.
- try 2.4.24-pre2

Hello,

So, i have compiled 2.4.24-pre2 as you say. In addition, i had this Oops after every reboot on 2.4.23 (nothing with 2.4.18 which works fine).

Then, I reboot again on 2.4.24-pre2 and ran burnP5 during 40 minutes to be sure. I had nothing and no oops at the moment. If i see this Oops with 2.4.24 (nothing now ;)), i'll run burnP5 on this and i'll say you what i have.

Thanks for your help...
++ Arnaud

Signature · 7 lines
Arnaud Fontaine <[email protected]> - http://www.andesi.org/
GnuPG Public Key available on pgp.mit.edu
Fingerprint: D792 B8A5 A567 B001 C342 2613 BDF2 A220 5E36 19D3

--
Be free and open and breezy!  Enjoy!  Things won't get any better so
get used to it.
#6 lore raw
Quoted 8 lines · Arnaud Fontaine
Quoted 4 lines · Xose Vazquez Perez

next steps :

- run burnP5 for 30 min.
- try 2.4.24-pre2

Hello,

Quoted 7 lines

So, i have compiled 2.4.24-pre2 as you say. In addition, i had this Oops after every reboot on 2.4.23 (nothing with 2.4.18 which works fine).

Then, I reboot again on 2.4.24-pre2 and ran burnP5 during 40 minutes to be sure. I had nothing and no oops at the moment. If i see this Oops with 2.4.24 (nothing now ;)), i'll run burnP5 on this and i'll say you what i have.

Could you please try 2.4.23 with the patch at
http://www.hardrock.org/kernel/current-updates/linux-2.4.23-updates.patch

I would like to know if that helps or not.

Thanks and regards
James

Quoted 5 lines

Thanks for your help...
++ Arnaud

Signature · 5 lines
James Bourne                  | Email:            [email protected]          
Unix Systems Administrator    | WWW:           http://www.hardrock.org
Custom Unix Programming       | Linux:  The choice of a GNU generation
----------------------------------------------------------------------
 "All you need's an occasional kick in the philosophy." Frank Herbert