velleman typo
Subsystems (2)
PATCH 1/1 velleman typo
Merry Christmas Greg ;)
That one replaces "K9000" with "K8000" everywhere (5 occurences) since it seems that the "K9000" was a typo in the first place. I will fix it in our CVS repository too, and then send a similar patch to Marcelo.
Documentation/i2c/i2c-velleman +1 -1
@@ -1,6 +1,6 @@ i2c-velleman driver ------------------- -This is a driver for i2c-hw access for Velleman K9000 and other adapters. +This is a driver for i2c-hw access for Velleman K8000 and other adapters. Useful links ------------
Documentation/i2c/summary +1 -1
@@ -71,5 +71,5 @@ i2c-adap-ibm_ocp: IBM 4xx processor I2C device (uses i2c-algo-ibm_ocp) (NOT BUILT BY DEFAULT) i2c-pport: Primitive parallel port adapter (uses i2c-algo-bit) i2c-rpx: RPX board Motorola 8xx I2C device (uses i2c-algo-8xx) (NOT BUILT BY DEFAULT) -i2c-velleman: Velleman K9000 parallel port adapter (uses i2c-algo-bit) +i2c-velleman: Velleman K8000 parallel port adapter (uses i2c-algo-bit)
drivers/i2c/busses/Kconfig +2 -2
@@ -275,10 +275,10 @@ will be called i2c-sis96x. config I2C_VELLEMAN - tristate "Velleman K9000 adapter" + tristate "Velleman K8000 adapter" depends on I2C_ALGOBIT && ISA help - This supports the Velleman K9000 parallel-port I2C adapter. Say Y + This supports the Velleman K8000 parallel-port I2C adapter. Say Y if you own such an adapter. This support is also available as a module. If so, the module
drivers/i2c/busses/i2c-velleman.c +1 -1
@@ -1,5 +1,5 @@/* ------------------------------------------------------------------------- */ -/* i2c-velleman.c i2c-hw access for Velleman K9000 adapters */ +/* i2c-velleman.c i2c-hw access for Velleman K8000 adapters */ /* ------------------------------------------------------------------------- */ /* Copyright (C) 1995-96, 2000 Simon G. Vogl
Signature · 2 lines
Jean Delvare http://www.ensicaen.ismra.fr/~delvare/
PATCH 1/1 velleman typo
Quoted 3 lines · Jean Delvare
Forget about this one for now, I have been updating the i2c-velleman doc after generating this patch... I'll send you a better version in a few days. Sorry for the trouble.
No trouble at all :)
PATCH 1/1 velleman typo
In reply to Jean DelvareForget about this one for now, I have been updating the i2c-velleman doc after generating this patch... I'll send you a better version in a few days. Sorry for the trouble.
Signature · 2 lines
Jean Delvare http://www.ensicaen.ismra.fr/~delvare/
PATCH 1/1 velleman typo
In reply to Jean DelvareUpdated version follow.
This patch replaces "K9000" with "K8000" everywhere (5 occurences) since it seems that the "K9000" was a typo in the first place. It also rewords the i2c-velleman doc. I have fixed it in our CVS repository too, and have been sending a similar patch to Marcelo for Linux 2.4.
Thanks.
Documentation/i2c/i2c-velleman +6 -10
@@ -1,6 +1,6 @@ i2c-velleman driver ------------------- -This is a driver for i2c-hw access for Velleman K9000 and other adapters. +This is a driver for i2c-hw access for Velleman K8000 and other adapters. Useful links ------------
@@ -10,18 +10,14 @@ Velleman K8000 Howto: http://howto.htlw16.ac.at/k8000-howto.html - K8000 and K8005 libraries ------------------------- -The project has lead to new libs for the Velleman K8000 and K8005.. +The project has lead to new libs for the Velleman K8000 and K8005: LIBK8000 v1.99.1 and LIBK8005 v0.21 -With these libs you can control the K8000 and K8005 with the original -simple commands which are in the original Velleman software. -Like SetIOchannel, ReadADchannel, SendStepCCWFull and many more. -Via i2c kernel device /dev/velleman +With these libs, you can control the K8000 interface card and the K8005 +stepper motor card with the simple commands which are in the original +Velleman software, like SetIOchannel, ReadADchannel, SendStepCCWFull and +many more, using /dev/velleman. The libs can be found on http://groups.yahoo.com/group/k8000/files/linux/ - -The Velleman K8000 interface card on http://www.velleman.be/kits/k8000.htm -The Velleman K8005 steppermotorcard on http://www.velleman.be/kits/k8005.htm
Documentation/i2c/summary +1 -1
@@ -71,5 +71,5 @@ i2c-adap-ibm_ocp: IBM 4xx processor I2C device (uses i2c-algo-ibm_ocp) (NOT BUILT BY DEFAULT) i2c-pport: Primitive parallel port adapter (uses i2c-algo-bit) i2c-rpx: RPX board Motorola 8xx I2C device (uses i2c-algo-8xx) (NOT BUILT BY DEFAULT) -i2c-velleman: Velleman K9000 parallel port adapter (uses i2c-algo-bit) +i2c-velleman: Velleman K8000 parallel port adapter (uses i2c-algo-bit)
drivers/i2c/busses/Kconfig +2 -2
@@ -275,10 +275,10 @@ will be called i2c-sis96x. config I2C_VELLEMAN - tristate "Velleman K9000 adapter" + tristate "Velleman K8000 adapter" depends on I2C_ALGOBIT && ISA help - This supports the Velleman K9000 parallel-port I2C adapter. Say Y + This supports the Velleman K8000 parallel-port I2C adapter. Say Y if you own such an adapter. This support is also available as a module. If so, the module
drivers/i2c/busses/i2c-velleman.c +1 -1
@@ -1,5 +1,5 @@/* ------------------------------------------------------------------------- */ -/* i2c-velleman.c i2c-hw access for Velleman K9000 adapters */ +/* i2c-velleman.c i2c-hw access for Velleman K8000 adapters */ /* ------------------------------------------------------------------------- */ /* Copyright (C) 1995-96, 2000 Simon G. Vogl
Signature · 2 lines
Jean Delvare http://www.ensicaen.ismra.fr/~delvare/
Greg KH
AppliedPATCH 1/1 velleman typo
In reply to Jean DelvareQuoted 6 lines · Jean Delvare
Updated version follow.
This patch replaces "K9000" with "K8000" everywhere (5 occurences) since it seems that the "K9000" was a typo in the first place. It also rewords the i2c-velleman doc. I have fixed it in our CVS repository too, and have been sending a similar patch to Marcelo for Linux 2.4.
Applied, thanks.
greg k-h