2.6.0-mm1 oops on boot (cpufreq related)
Hi all,
hand-copied from the oopsed screen (but should be reliable...):
cpufreq: CPU0 - ACPI performance management activated
cpufreq: *P0: 1Mhz, 0 mW, 0 uS
cpufreq: P1: 0Mhz, 0 mW, 0 uS
divide error: 0000 [#1]
PREEMPT
CPU: 0 EIP: 0060:[<c02cb03f>] Not tainted VLI EFLAGS: 00010246
EIP is at cpufreq_notify_transition+0xb2/0x17a
eax: 001b1000 ebx: 001b1000 ecx: 00000000 edx: 00000000
esi: c1a37f70 edi: 00000000 ebp: 0000008b esp: c1a37fa8
ds: 007b es: 007b ss:0068
Process swapper (pid: 1, threadinfo=c1a36000 task=f7f9f980)
Stack: ffffff00 c01164d9 00000060 00000086 f7dab860 f7dab800 0000008b c01156d3
c1a37f70 00000001 c1a37f60 c037b940 00000000 00000086 f7dab860 00000064
01000000 c037b8e0 c037d37e 00000000 00000000 00000001 00000000 c1a37fa8
Call Trace:
[<c01164d9>] delay_tsc+0xb/0x15
[<c01156d3>] acpi_processor_set_performance+0x1e0/0x3e6
[<c04652c1>] acpi_cpufreq_init+0x243/0x2a3
[<c045e6e6>] do_initcalls+0x27/0x93
[<c012c9e7>] init_workqueues+0xf/0x28
[<c01070bd>] init+0x30/0x133
[<c010708d>] init+0x0/0x133
[<c0108f59>] kernel_thread_helper+0x5/0xb
Code: 08 39 4e 04 76 3e bf 1f 85 eb 51 8b 1d 50 fe 4a c0 89 f8 f7 e1 89 f8 89 d1 f7 25 54 fe 4a c0 89 d8 89 d7 c1 e9 05 31 d2 c1 ef 05 <f7> f7 89 d5 89 c3 31 d2 0f af e9 0f af d9 89 e8 f7 f7 01 d8 a3
<0>Kernel panic: Attempted to kill init!RedHat 9, Dell Latitude C640, [email protected] / 1GB RAM.
Using Preempt, highmem4g.
2.6.0 vanilla boots fine.
To build -mm1 I added CONFIG_INPUT_EVDEV (for Synaptics TouchPad) and
removed CONFIG_SERIO_PCIPS2 (I realized I'll never use dockstations).
I'll be happy to follow up on this - just please CC: me directly, I
only read l-k via the USSG mail archives. Thanks in advance, ciao,
--alessandro
"Immagina intensamente e vedrai
dove gli altri pensano che non ci sia niente"
(Cristina Dona', "Salti nell'aria")
Quoted 10 lines · Alessandro Suardi
pufreq: CPU0 - ACPI performance management activated
cpufreq: *P0: 1Mhz, 0 mW, 0 uS
cpufreq: P1: 0Mhz, 0 mW, 0 uS
divide error: 0000 [#1]
PREEMPT
CPU: 0
EIP: 0060:[<c02cb03f>] Not tainted VLI
EFLAGS: 00010246
EIP is atcpufreq_notify_transition+0xb2/0x17a
Quoted 16 lines
eax: 001b1000 ebx: 001b1000 ecx: 00000000 edx: 00000000
esi: c1a37f70 edi: 00000000 ebp: 0000008b esp: c1a37fa8
ds: 007b es: 007b ss:0068
Process swapper (pid: 1, threadinfo=c1a36000 task=f7f9f980)
Stack: ffffff00 c01164d9 00000060 00000086 f7dab860 f7dab800 0000008b c01156d3
c1a37f70 00000001 c1a37f60 c037b940 00000000 00000086 f7dab860 00000064
01000000 c037b8e0 c037d37e 00000000 00000000 00000001 00000000 c1a37fa8
Call Trace:
[<c01164d9>] delay_tsc+0xb/0x15
[<c01156d3>] acpi_processor_set_performance+0x1e0/0x3e6
[<c04652c1>] acpi_cpufreq_init+0x243/0x2a3
[<c045e6e6>] do_initcalls+0x27/0x93
[<c012c9e7>] init_workqueues+0xf/0x28
[<c01070bd>] init+0x30/0x133
[<c010708d>] init+0x0/0x133
[<c0108f59>] kernel_thread_helper+0x5/0xbhmm, I don't think there's much in the way of cpufreq changes in -mm.
Would you be able to try just 2.6.0 plus
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.0/2.6.0-mm1/broken-out/acpi-20031203.patch
Thanks.
Quoted 29 lines · Andrew Morton
Quoted 13 lines · Alessandro Suardi
pufreq: CPU0 - ACPI performance management activated
cpufreq: *P0: 1Mhz, 0 mW, 0 uS
cpufreq: P1: 0Mhz, 0 mW, 0 uS
divide error: 0000 [#1]
PREEMPTCPU: 0 EIP: 0060:[<c02cb03f>] Not tainted VLI EFLAGS: 00010246EIP is at
cpufreq_notify_transition+0xb2/0x17a
eax:001b1000ebx:001b1000ecx: 00000000 edx: 00000000
esi:c1a37f70edi: 00000000 ebp:0000008besp:c1a37fa8
ds: 007b es: 007b ss:0068
Process swapper (pid: 1, threadinfo=c1a36000 task=f7f9f980)Quoted 12 lines
Stack: ffffff00 c01164d9 00000060 00000086 f7dab860 f7dab800 0000008b c01156d3 c1a37f70 00000001 c1a37f60 c037b940 00000000 00000086 f7dab860 00000064 01000000 c037b8e0 c037d37e 00000000 00000000 00000001 00000000 c1a37fa8 Call Trace: [<c01164d9>] delay_tsc+0xb/0x15 [<c01156d3>] acpi_processor_set_performance+0x1e0/0x3e6 [<c04652c1>] acpi_cpufreq_init+0x243/0x2a3 [<c045e6e6>] do_initcalls+0x27/0x93 [<c012c9e7>] init_workqueues+0xf/0x28 [<c01070bd>] init+0x30/0x133 [<c010708d>] init+0x0/0x133 [<c0108f59>] kernel_thread_helper+0x5/0xb
Quoted 7 lines
hmm, I don't think there's much in the way of cpufreq changes in -mm.
Would you be able to try just 2.6.0 plus
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.0/2.6.0-mm1/broken-out/acpi-20031203.patchThanks.
Of course :)
2.6.0 plus your above patch yields a very similar panic, though not
100% identical.
* EIP is at the same place
* Call trace is missing delay_tsc, otherwise identical, offsets included
* First three blocks of the stack differ (all the rest looked identical)
* There is no "VLI" string after "Not Tainted" (I assume it's another part of the -mm1 patch)
So yup, you got the part that makes -mm1 unbootable here :)
Here's my ACPI options:
[asuardi@incident linux]$ grep -i acpi .config
# Power management options (ACPI, APM)
# ACPI (Advanced Configuration and Power Interface) Support CONFIG_ACPI=yCONFIG_ACPI_BOOT=yCONFIG_ACPI_INTERPRETER=y
# CONFIG_ACPI_SLEEP is not setCONFIG_ACPI_AC=yCONFIG_ACPI_BATTERY=y
# CONFIG_ACPI_BUTTON is not setCONFIG_ACPI_FAN=yCONFIG_ACPI_PROCESSOR=yCONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set CONFIG_ACPI_DEBUG=yCONFIG_ACPI_BUS=yCONFIG_ACPI_EC=yCONFIG_ACPI_POWER=yCONFIG_ACPI_PCI=yCONFIG_ACPI_SYSTEM=y
# CONFIG_ACPI_RELAXED_AML is not set CONFIG_X86_ACPI_CPUFREQ=y
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_SERIAL_8250_ACPI is not set
Available for any fiddling. Ah, holidays ;)
Thanks, ciao,
--alessandro
"Immagina intensamente e vedrai
dove gli altri pensano che non ci sia niente"
(Cristina Dona', "Salti nell'aria")