Skip to contentSkip to conversation

2.6.0 + logitech wheel mouse optical usb

DISCUSSION Andreas Theofilu 2 participants 2 messages Dec 29, 2003 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw
Quoted 5 lines · dju`

Hello,

I've tested 2.6.0 and I found something weird with my mouse (which used to work well with 2.4).

Quoted 7 lines

Clicking on the mouse buttons does nothing for about 15% of the clicks (using the wheel has this behaviour too) for the first hour of uptime.

After an hour uptime, this behaviour seems to disappear and clicks and wheels do the things expected.

Tested on the console with gpm: same thing.

I do have this same problem here with a "Dexxa wireless optical mouse" connected to the PS/2 port. But here the problem comes and goes radomly. However. It is fully reproduceable after playing a video file with mplayer.

Signature · 3 lines
Andreas Theofilu
http://www.TheosSoft.net
E-Mail: andreas at TheosSoft dot net
#2 lore raw

[OT] Experience with wheel mouse optical usb

Hello, this is only for usb wheel mouse users, this is my experience with kernel 2.4.X and 2.6.0.

May be this help for someone.

If someone has something to tell me, thanks.

Asus MOBO kt266
2.4.X (21 - 23) Behavior
USB Wheel mouse should be unplugged and replugged to turn it on and get it to work, I try whit usbkbd activated and deactivated.
When power source is still available I can restart a lot of times without replugging my mouse. This happens only when power off/On.
A lot of USB cameras work incredible great (Fuji/Casio/Logitech). Every stuff pass into my hands, is going to be tested, and only weird Walkman or uncommon hardware doesn't work.

Asus MOBO kt266
2.6.0 (test9-11-F.R.) Behavior
USB Wheel mouse should be unplugged and replugged to turn it on. But in this weird case I need to restart Linux, Mouse just only works if kernel boot with mouse turned on.
I have hotplug, of course and new init-module-tools

Note: If you have mouse on one USB HUB, you should put other devices like usbscanner or mass-storage device on other USB HUB, to get it work fine. Generally, new MOBOS has 2 UBS 4 PORTS IN TOTAL, and OTHER HUB for front panel. Some USB devices can't share the same HUB. I test a QUE! CD Writer USB and a Fuji/Casio cameras (mass storage) and in both cases this devices doesn't like to share the same HUB with USB mouse.

For nvidia users: Hey! If the wheel doesn't work with patched driver, try an older one, it works for me.

http://www.sh.nu/download/nvidia/

[4620]

Happy new Year