binupld
PATCH 1/6 binupld
-------------- next part --------------
#
# Author: Robert Schwebel <[email protected]>
#
# Description: Binary upload tool by Chris Hallinan
#
# State: 2003-12-09: submit
#
#
# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher
#
tools/binupld.c new file +204 -0
@@ -0,0 +1,204 @@ +/* This utility downloads a binary file from Minicom to +* the serial port. It supports the Xon-Xoff software +* flow control protocol to use the highest possible speed +* +* (C) Copyright 2001, 2002 DS4.COM, Inc. +* Chris Hallinan clh at net1plus.com +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +* +* To use this utility with Minicom, add the entry in Minicom's +* File Transfer Protocol as follows: +* Type Ctl-A, O (enter Configuration menu) +* Select File transfer protocols from menu +* Add the entry for binupld to look like the following (Item K) +* +* Name Program Name U/D FullScr IO-Red. Multi +* A zmodem /usr/bin/sz -vv -b Y U N Y Y +* B ymodem /usr/bin/sb -vv Y U N Y Y +* C xmodem /usr/bin/sx -vv Y U N Y N +* D zmodem /usr/bin/rz -vv -b -E N D N Y Y +* E ymodem /usr/bin/rb -vv N D N Y Y +* F xmodem /usr/bin/rx -vv Y D N Y N +* G kermit /usr/bin/kermit -i -l %l -s Y U Y N N +* H kermit /usr/bin/kermit -i -l %l -r N D Y N N +* I ascii /usr/bin/ascii-xfr -dsv Y U N Y N +* J srecdnld /usr/bin/srecdnl Y U N Y N +* K binupld /usr/bin/binupld Y U N Y N +*/ + +#include <stdio.h> +#include <stdlib.h> +#include <sys/time.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <fcntl.h> +#include <unistd.h> +#include <string.h> +#include <asm/errno.h> + +#define BUFSZ 1024 +#define TXBLK_SIZE 32 +#define XON 0x11/* ASCII DC1 character */ +#define XOFF 0x13/* ASCII DC3 character */ + +#define USE_STDERR +#undef USE_STDOUT + +#ifdef USE_STDERR +#define ERR_OUT stderr +#else +#define ERR_OUT err_fp +#define ERR_DEVICE "/dev/pts/0" +#endif + +#ifdef USE_STDOUT +#define LINE_OUT stdout +#else +#define LINE_OUT tty_fp +#endif + +int +main (int argc,char **argv) +{ +int bin_fd, i, fsize, nResult, count; +struct stat fst; +char lbuf; +int stepval, done, xoff, msgbidx =0 ; +fd_set rfds; +struct timeval tv; +static char msgbuf[2048 ]; +static int got_xoff =0 ; + +#ifndef USE_STDOUT +int LINE_OUT ; +#endif + +#ifndef USE_STDERR +FILE *ERR_OUT ; + +ERR_OUT =fopen (ERR_DEVICE ,"w" ); +if (ERR_OUT ==NULL ) { +perror ("Error opening error output device" ); +return -1 ; + } +#endif + +#ifndef USE_STDOUT +LINE_OUT =open ("/dev/ttyS0" ,O_RDWR ); +if (LINE_OUT ==1 ) { +perror ("Error opening serial output device" ); +return -1 ; + } +#endif + +if (argc !=2 ) { +fprintf (ERR_OUT ,"Bad args\n" ); +return -1 ; + } + +if (strlen (argv[1 ]) <1 ) { +fprintf (ERR_OUT ,"Bad file name\n" ); +return -1 ; + } + + bin_fd =open (argv[1 ],O_RDONLY ); +if (bin_fd ==1 ) { +perror ("Open failed" ); +return -1 ; + } + +/* Get file size */ + i =fstat (bin_fd, &fst); +if (i ==-1 ) { +perror ("stat failed" ); +close (bin_fd); +return -1 ; + } + fsize = fst.st_size; + stepval =100 ; + +/* Now ready for the file transfer! */ +fprintf (ERR_OUT ,"\nUploading from %s --- xxxxxxx" , argv[1 ]); + + i =0 ; + done =0 ; + xoff =0 ; +while (!done) { +if (!xoff) { + count =read (bin_fd, &lbuf,TXBLK_SIZE ); +if (count ==0 ) { + done =1 ; +break ; + } + +/* Write the output byte to tty port */ +if (write (LINE_OUT , &lbuf, count) != count) { +fprintf (ERR_OUT , +"Aw shit, binary write failed\n" ); +return -1 ; + } + } + +#if 1 /* Delete if you don't need XON/XOFF spt */ +/* Setup for watching serial line input */ +FD_ZERO (&rfds); +FD_SET (LINE_OUT , &rfds); +/* Wait up to five hundred microseconds. */ + tv.tv_sec =0 ; + tv.tv_usec =500 ; + nResult =select (LINE_OUT +1 , &rfds,NULL ,NULL , &tv); +if (nResult ==-1 ) { +perror ("Select failed" ); +return -1 ; + } + +if (nResult &&FD_ISSET (LINE_OUT , &rfds)) { +char c =getchar (); +/* Character received from serial port */ +switch (c) { +case XOFF : + xoff =1 ; + got_xoff =1 ; +break ; +case XON : + xoff =0 ; +break ; +default : + msgbuf[msgbidx++] = c; +/* fprintf(ERR_OUT, " Data [%02x]\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b", c); */ +break ; + } + } +#endif + +/* Display download progress */ + i += count; +fprintf (ERR_OUT ,"\b\b\b\b\b\b\b%07d" , i); + } + +fprintf (ERR_OUT ," - Done\n" ); + msgbuf[msgbidx] ='\0' ; +if (strlen (msgbuf)) +fprintf (ERR_OUT ,"Msgbuf: %s\n" , msgbuf); + +/* Report if we got an XOFF */ +if (got_xoff) +fprintf (ERR_OUT ,"Got XOFF\n" ); + +close (bin_fd); +return 0 ; +}
PATCH 1/6 binupld
tools/binupld.c line 3
Quoted 7 lines · In message <[email protected]> you wrote:
tools/binupld.c new file +3
-0@@ -0,0 +1,204 @@ +/* This utility downloads a binary file from Minicom to +* the serial port. It supports the Xon-Xoff software +* flow control protocol to use the highest possible speed
I don't want to add this. It is not really related to or necessary for U-Boot, especially since most of the U-Boot serial drivers don't support Xon-Xff flow control anyway.
Best regards,
Wolfgang Denk
Signature · 4 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de Immortality consists largely of boredom. -- Zefrem Cochrane, "Metamorphosis", stardate 3219.8