cant't stop program
Hi,All:
After the denk's instruction, I can run the
linuxppc-2.4.23 on PPC8xx without too much difficulty. But when running some programming , I want to terminate it like I do on PC by press Ctrl+C. It doesn't work at all :(. It can work under the U-boot environment. I wonder whether this is the
problem of Linux os Or Kermit?
Thanks your instructions and help
Best Regards.
Zonjun Sun.
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
Quoted 6 lines · sun-zj
After the denk's instruction, I can run the
linuxppc-2.4.23 on PPC8xx without too much difficulty. But when running some programming , I want to terminate it like I do on PC by press Ctrl+C. It doesn't work at all :(. It can work under the U-boot environment. I wonder whether this is the
problem of Linux os Or Kermit?
I have seem problems like that when running from serial console under Busybox. I think busybox's init is buggy. Does the problem happen when you telnet in from another computer, or only on a serial console?
- Dan
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
Hi,
I sometimes (!) see the same problem when running from serial console. Telnet works ok. I did change in my kernel driver/char/tty_io.c to set noctty = 0;
It seems that in shell/ash.c from busybox the call (pgrp = tcgetpgrp(fd)) returns an error code.
Jaap-Jan
Quoted 8 lines · Dan Kegel
Quoted 6 lines · sun-zj
After the denk's instruction, I can run the
linuxppc-2.4.23 on PPC8xx without too much difficulty. But when running some programming , I want to terminate it like I do on PC by press Ctrl+C. It doesn't work at all :(. It can work under the U-boot environment. I wonder whether this is the
problem of Linux os Or Kermit?
Quoted 6 lines
I have seem problems like that when running from serial console under Busybox. I think busybox's init is buggy. Does the problem happen when you telnet in from another computer, or only on a serial console?
- Dan
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
Dan Kegel wrote:
| I have seem problems like that when running from serial | console under Busybox. I think busybox's init is buggy. | Does the problem happen when you telnet in from another computer, | or only on a serial console?
Seconded on the busybox front Dan. Did I say again that crosstool rocks? PTX-dist also rocks too.
I know there are some problems in the busybox init but they are not causing me enough grief right now to spend time fixing ;-).
Cheers,
Jon.
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/