2.6.1-rc3

Not a lot to say, the ChangeLog says it all (and I include the -rc2 log too, since I forgot to actually ever post it). Mostly random smaller stuff all over. The big merges were all in rc1 and do not seem to have caused any huge headaches.

Linus

---

Summary of changes from v2.6.1-rc2 to v2.6.1-rc3
============================================

Adam Belay:
o Fix PnP BIOS call

Andi Kleen:
o Fix interrupt routing problem on x86-64
o [COMPAT]: Handle SO_TIMESTAMP cmsgs

Andrew Morton:
o MSI build fixes
o fix sysfs oops
o JFS fix for NFS on little-endian systems
o dvb: firmware fixes
o ia32 sched_clock() deadlock fix
o /proc/ppc64 and /proc/iSeries fixes from Linas Vepstas
o ppc64: Add missing section definition

Bartlomiej Zolnierkiewicz:
o cmd640.c: fix PCI type1 access
o ide-tape.c: stop abusing rq->flags
o remove dead and broken DISK_RECOVERY_TIME support
o fix oopses on rmmod in some OSS drivers

Ciaran McCreesh:
o [SPARC64]: Fix CONFIG_DRM_FFB=y build

Dave Jones:
o [AGPGART] printk level changes for amd64
o [AGPGART] Add support for Radeon IGP345M to ATI GART driver

Dave Kleikamp:
o don't clear i_sb

David Dillow:
o [SUNZILOG]: Register the correct number of ports, ignore keyb/mouse lines

David S. Miller:
o [NET]: In dev_kfree_skb_any() use dev_kfree_skb_irq() if irqs_disabled()
o [NET]: Un-deprecate skb_linearize(), we can re-deprecate in 2.7.x

Hideaki Yoshifuji:
o [IPV6]: Kill obsolete functions (ip6_frag_xmit() and

    ip6_build_xmit())

Ingo Molnar:
o [NET]: Do type checking in {udp,inet6,raw6,inet}_sk()

James Morris:
o [NETFILTER]: Add SELINUX priority values for ipv4/ipv6, approved by Harald Welte

Jean Tourrilhes:
o [IRDA]: Fix locking in the ircomm-shutdown path

Keith M. Wesolowski:
o [SPARC32]: Fix BUG on swapout on srmmu systems

Linus Torvalds:
o Fix ttpci bogus use of floating point by casting the constant expression properly.
o Fix silly mremap test
o Don't relocate non-allocated regions in modules

Martin Devera:
o [NET]: Make sure that class selected by priority is a leaf in HTB scheduler

Matthew Wilcox:
o [SPARC64]: Use drivers/block/Kconfig
o [SPARC32]: Use drivers/block/Kconfig

Mitsuru Kanda:
o Fix my PGP fingerprint in the CREDITS file

Roman Zippel:
o generate an error if writing of kernel config failed
o fix gconf segfault problem
o gconf compile warning fixes
o gconf startup fixes
o qconf fix

Stephen Hemminger:
o [AF_PACKET]: Convert to seq_file
o [DECNET]: Better way to prevent decnet module unload
o [NET]: Fix multiple eth0 mixed PCI/ISA init

Tom 'spot' Callaway:
o [SPARC]: Add missing MODULE_LICENSE tags to various Sparc driver
o [SPARC64]: Fix sun_uflash MTD driver build
o [SPARC]: Add placeholder asm-{sparc,sparc64}/setup.h so MTD builds
o [SPARC64]: Export sys_close for solaris emulation

Ville Nuorvala:
o [IPV6]: Autoconfig link-local address on ip6-ip6 tunnel device

Summary of changes from v2.6.1-rc1 to v2.6.1-rc2
============================================

Amit Gurdasani:
o [SERIAL] EISA ID for PnP modem

Andi Kleen:
o X86-64 merge
o Fix memset on x86-64

Bart De Schuymer:
o [BRIDGE NETFILTER]: Fix leaks and crashes in SKB handling
o [BRIDGE NETFILTER]: IPV6 needs the skb->nf_bridge leak fix as well
o [BRIDGE]: Fix build with vlan disabled, spurious ifdef

Ciaran McCreesh:
o [SPARC64]: Fix broken _PAGE_SZHUGE defines for 512K and 64K

Dave Jones:
o [CPUFREQ] Add support for 1GHz Centrino speedstep From: Youichi Aso

    <[email protected]>

o [AGPGART] Handle multiple AMD64 AGP bridges correctly on UP
o [AGPGART] Fix return check on request_mem_region() Do things the way every other user of this function does.
o [CPUFREQ] Fix powernow-k8 policy usage
o [CPUFREQ] Abort if there is a failure in aquiring "ownership" of the SMI speedstep interface
o [AGPGART] Fix two nasty bugs in the K8 AGP support
o [CPUFREQ] Use different attack with the Powernow-K7 bad bios problems
o [AGPGART] Fix MAX_HAMMER_GARTS off by one
o [CPUFREQ] Fix rounding in longhaul
o [AGPGART] Mask memory after allocation We missed a few cases where we need to do this.
o [AGPGART] Merge missing chunk of NVIDIA nForce agpgart driver
o [AGPGART] Remove duplicate programming of AGP command register
o [CPUFREQ] on P4s no TSC adjustment is necessary From Dominik Brodowski
o [CPUFREQ] Disable debug output in speedstep-smi driver
o [CPUFREQ] speedstep hcakers cnat spel
o [CPUFREQ] Disable smi_detect_freqs() call on systems which do not support it [BUG #1422] Dominik Brodowski.
o [CPUFREQ] Support for 533 MHz FSB in speedstep driver
o [CPUFREQ] Detect CPU speed without relying on cpu_khz
o [CPUFREQ] remove unneeded #ifdefs in include/linux/cpufreq.h
o [CPUFREQ] use latency in nanoseconds sometimes nanoseconds are used, sometimes microseconds, sometimes even something else.
o [CPUFREQ] Do something about "cpufreq: change failed"
o [CPUFREQ] do not leak memory in powernow-k8 From Pavel Machek
o [CPUFREQ] Typo fix in drivers/cpufreq/Kconfig
o [CPUFREQ] Missing .owner entry in speedstep-smi driver

David Mosberger:
o ia64: Fix a ptrace-bug that caused "strace -f" to crash the inferior process. The root-cause of the problem was that ptrace() tried to copy the portion of the register backing store that landed on the kernel stack back to users-space, but the resulting state was inconsistent if the inferior process was in the middle of a system-call (as would always be the case for strace).
o ia64: Rearrange ia64_do_signal() such that it is possible for a debugger to cancel system-call restart.
o ia64: Allow system-call number to be changed during system-call tracing (both for native and x86 system call tracing). This is needed by recent versions of strace and UML likes to do that, too.
o ia64: Remove the old ia64_ni_syscall()/sys32_ni_syscall() routines which are overly verbose and replace them with calls to sys_ni_syscall().
o ia64: fix perfmon bug causing lost samples
o ia64: Merge patch by Arun Sharma: hook up lots of ia32 syscalls
o ia64: Rename efi_get_time() in the simulator's firmware-emulator to avoid name-clash with declaration of routine of the same name in <linux/efi.h>.
o ia64: Update defconfig

David S. Miller:
o [TG3]: Do not drop existing GRC_MODE_HOST_STACKUP when writing to GRC_MODE
o [TG3]: Do not set RX_MODE_KEEP_VLAN_TAG when ASF is enabled
o [TG3]: Clear on-chip stats/status block after resetting flow-through queues
o [TG3]: Update version and release date
o [TG3]: Update to latest non-5705 TSO firmware
o [TG3]: Update version and reldate
o [MEDIA]: ttusb_dec.c needs linux/init.h
o [SPARC64]: Update defconfig

François Romieu:
o [TG3]: Fix bogus return value in tg3_init_one()

Hideaki Yoshifuji:
o [NET]: Fix comment type in skbuff.h

James Bottomley:
o MSI broke voyager build

Jeroen Vreeken:
o [AX25]: Missing spin_unlock() and recvmsg reported dst instead of src

Linus Torvalds:
o Remove generated files from revision control
o Remove dead files
o Fix IDE "PIO WRITE wait for ready" test under extreme interrupt load
o Don't allow mremap of zero-sized areas

Michael Hunold:
o DVB: Update documentation and credits
o DVB: Fix feed list handling bugs in demux
o DVB: Fixes for frontend drivers
o DVB: Add static firmware compilation again
o DVB: Revamp of the TTUSB-DEC driver
o DVB: Fix memory usage of ttpci driver

Rene Herman:
o [SERIAL] add PnP ID to 8250_pnp.c

Russell King:
o Fix "echo -n 3 > /sys/.../power/state"
o [SERIAL] Remove old RSA resource handlign
o [ARM] Fix more gcc3 build errors
o [ARM] Fix cachepolicy=<foo>
o [ARM] Kill dma-isa.c warning
o [ARM] Report more detail when unable to resolve module relocations

Xose Vazquez Perez:
o [TG3]: Add new device IDs

Would you mind including this for final 2.6.1 ? I allows aicasm build with different db versions:

@@ -34,10 +34,14 @@
 	$(AICASM_CC) $(AICASM_CFLAGS) $(SRCS) -o $(PROG) $(LIBS)
 
 aicdb.h:
-	@if [ -e "/usr/include/db3/db_185.h" ]; then		\
+	@if [ -e "/usr/include/db4/db_185.h" ]; then		\
+		echo "#include <db4/db_185.h>" > aicdb.h;	\
+	 elif [ -e "/usr/include/db3/db_185.h" ]; then		\
 		echo "#include <db3/db_185.h>" > aicdb.h;	\
 	 elif [ -e "/usr/include/db2/db_185.h" ]; then		\
 		echo "#include <db2/db_185.h>" > aicdb.h;	\
+	 elif [ -e "/usr/include/db1/db_185.h" ]; then		\
+		echo "#include <db1/db_185.h>" > aicdb.h;	\
 	 elif [ -e "/usr/include/db/db_185.h" ]; then		\
 		echo "#include <db/db_185.h>" > aicdb.h;	\
 	 elif [ -e "/usr/include/db_185.h" ]; then		\

J.A. Magallon <jamagallon()able!es>     \                 Software is like sex:
werewolf!able!es                         \           It's better when it's free
Mandrake Linux release 10.0 (Cooker) for i586
Linux 2.6.1-rc1-jam2 (gcc 3.3.2 (Mandrake Linux 10.0 3.3.2-3mdk))