Again,Bandwidth&htb
Good Day All
Just 2 questions on htb
1,My Wan link is on eth1 and my Lan on eth0,where do I put my htb on?I want to limit web serving and ftp ens.
2.Im going to use the u32 filter.Can I use sub-netting for IP,i.o.w where src is can I do 192.168.1.0/24?
Thanks and Please Help
Eddie
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 5 lines · Eddie
Good Day All
Just 2 questions on htb1,My Wan link is on eth1 and my Lan on eth0,where do I put my htb on?I want to limit web serving and ftp ens.
eth1 for downloads from your web/ftp server
eth0 for uploads to your web/ftp server
Quoted 2 lines
2.Im going to use the u32 filter.Can I use sub-netting for IP,i.o.w where src is can I do 192.168.1.0/24?
Yes you can. See
http://docum.org/stef.coene/qos/docs/u32-filter.html
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
OK but how do I specify a range of ports,for examples 15000-15010 15000:15010??
Quoted 10 lines · Stef Coene
*This message was transferred with a trial version of CommuniGate(tm) Pro*
Quoted 5 lines · Eddie
Good Day All
Just 2 questions on htb1,My Wan link is on eth1 and my Lan on eth0,where do I put my htb on?I want to limit web serving and ftp ens.
eth1 for downloads from your web/ftp server
eth0 for uploads to your web/ftp server
Quoted 6 lines
Quoted 2 lines
2.Im going to use the u32 filter.Can I use sub-netting for IP,i.o.w where src is can I do 192.168.1.0/24?
Yes you can. See
http://docum.org/stef.coene/qos/docs/u32-filter.htmlStef
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 2 lines · Eddie
OK but how do I specify a range of ports,for examples 15000-15010 15000:15010??
You can't with u32. But you can use iptables to mark packets and filter the packets with the fw filter.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi all,
1.) You can put in your internal interface to slow down the traffic.
2.) You set the filter by single ip or network.
[]´s
Anderson
Quoted 4 lines
Good Day All
Just 2 questions on htb1,My Wan link is on eth1 and my Lan on eth0,where do I
put my htb on?I
Quoted 3 lines
want to limit web serving and ftp ens.
2.Im going to use the u32 filter.Can I use sub-
netting for IP,i.o.w
Quoted 8 lines
where src is can I do 192.168.1.0/24?
Thanks and Please Help
Eddie_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: ht
tp://lartc.org/
Quoted 1 line
__________________________________________________________________________
Acabe com aquelas janelinhas que pulam na sua tela. AntiPop-up UOL - É grátis!
http://antipopup.uol.com.br/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/