Fix debug bug in lm83 driver

Hi Greg,

The following patch fixes lm83 failing to compile if DEBUG is set.

BTW, how does one enable DEBUG? I tried to add "-DDEBUG" in the main Makefile with no success, then I tried to add "#define DEBUG" in the driver itself but it didn't work either. I had to run the correct compilation command directly by myself with -DDEBUG to get it to work. I just can't understand why the two other ways (especially the second) fails to work. Does Voodoo magic surround us? Help! ;)

@@ -270,7 +270,7 @@
 		    & 0x48) != 0x00) ||
 		    ((i2c_smbus_read_byte_data(new_client, LM83_REG_R_CONFIG)
 		    & 0x41) != 0x00)) {
-			dev_dbg(&client->dev,
+			dev_dbg(&adapter->dev,
 			    "LM83 detection failed at 0x%02x.\n", address);
 			goto exit_free;
 		}

Jean Delvare
http://www.ensicaen.ismra.fr/~delvare/

Applied.

Add #define DEBUG at the start of the file, no vodo magic needed :)

thanks,

greg k-h

Hm. I wonder if I should really tell you what I did. I'll be ridiculous. Hm.

Anyway... My "#define DEBUG" was after all other includes. So dev_dbg was resolved to nothing. Because the call to dev_dbg was after my #define, I expected it to resolve correctly...

Shame on me, and thanks for the explanation.

Still doesn't explain why adding -DDEBUG to the main Makefile didn't do the trick, but I don't have that much time to waste to investigate it all.

Jean Delvare
http://www.ensicaen.ismra.fr/~delvare/