iptables v1.2.7a: can't initialize iptables table `filter'
Dear Group,
I am getting the following whenever I tried to do any operation with iptables.
% iptables -L
iptables v1.2.7a: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
% rpm -qa | grep kernel
kernel-pcmcia-cs-3.1.31-13
kernel-2.4.20-28.9
kernel-BOOT-2.4.20-28.9
kernel-doc-2.4.20-28.9
kernel-source-2.4.20-28.9
% lsmod
Module Size Used by Not tainted
e1000 54528 1 ext3 61280 2 jbd 46804 2 [ext3] 3w-xxxx 36192 3 sd_mod 11916 6 scsi_mod 63416 2 [3w-xxxx sd_mod]
How do I get this resolved? It seems the problem is after I upgraded the kernel. I am running RH 9.
Thanks,
Prince.
Quoted 1 line · prince
How do I get this resolved? It seems the problem is after I upgraded the kernel. I am running RH 9.
What does 'uname -a' return? perhaps you've upgraded the modules but booted the wrong kernel?
Alex
Alex!,
Please find the output of 'uname -a'
Linux dev9.my-comp.com 2.4.20-28.9BOOT #1 Thu Dec 18 13:27:13 EST 2003 i686 i686 i386 GNU/Linux
Tim:
I don't think I have ipchains running.
% rpm -qa | grep ipchain retuns nothing.
% rpm -qa | grep iptables
iptables-1.2.7a-2
Note: Recently there was an security alert from RedHat (forwarded by the hosting provider) to upgrade the kernel to the latest version. so, I did upgrade the kernel. Probably this might have reomved something else. But, I don't know how to verify this. Even if it is the case, how do I get the iptables working again?
Thanks,
Prince.
On Tue, 13 Jan 2004 11:35:49 +1100, Alex Satrapa wrote
Quoted 8 lines
Quoted 2 lines · prince
How do I get this resolved? It seems the problem is after I upgraded the kernel. I am running RH 9.
What does 'uname -a' return? perhaps you've upgraded the modules but booted the wrong kernel?
Alex
A message that is not in the archive (sent off-list or not yet received): [email protected]
Thanks Vjr.
"Verify the modules iptables are compile to your kernel". How do I do this? I am not so good at Linux administration.
Prince.
On Tue, 13 Jan 2004 07:55:06 -0200, VJr wrote
Quoted 55 lines
Hello! ;)
Try use
/sbin/insmod/lib/modules/2.4.20/kernel/net/ipv4/netfilter/iptable_filter.oiptables -L
Verify the modules iptables are compile to your kernel (my english is bad )
;0
VJr
----- Original Message -----
From: prince <[email protected]>
To: <[email protected]>
Sent: Monday, January 12, 2004 10:19 PM
Subject: iptables v1.2.7a: can't initialize iptables table `filter'Quoted 3 lines
Dear Group,
I am getting the following whenever I tried to do any operation with
iptables.
Quoted 4 lines
% iptables -L
iptables v1.2.7a: can't initialize iptables table `filter': iptables who?
(do
Quoted 26 lines
you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.% rpm -qa | grep kernel
kernel-pcmcia-cs-3.1.31-13
kernel-2.4.20-28.9
kernel-BOOT-2.4.20-28.9
kernel-doc-2.4.20-28.9
kernel-source-2.4.20-28.9% lsmod
Module Size Used by Not taintede1000 54528 1 ext3 61280 2 jbd 46804 2 [ext3] 3w-xxxx 36192 3 sd_mod 11916 6 scsi_mod 63416 2 [3w-xxxx sd_mod]How do I get this resolved? It seems the problem is after I upgraded the kernel. I am running RH 9.
Thanks,
Prince.