Skip to contentSkip to conversation

kg7-RAID: DMA timeout error

DISCUSSION Perverz Tata 1 participant 1 message Jan 19, 2004

lore
Share & tools
lore
#0 lore raw

I have attached a new hdd to my integrated raid controller, but i have the following message from the kernel:
HPT370A: IDE controller at PCI slot 0000:00:13.0
HPT370A: chipset revision 4
HPT37X: using 33MHz PCI clock
HPT370A: 100% native mode on irq 11

    ide2: BM-DMA at 0xec00-0xec07, BIOS settings: hde:pio, hdf:DMA
    ide3: BM-DMA at 0xec08-0xec0f, BIOS settings: hdg:pio, hdh:pio

hdf: Maxtor 6Y080P0, ATA DISK drive
...

hdf: max request size: 128KiB
hdf: 160086528 sectors (81964 MB) w/7936KiB Cache, CHS=65535/16/63, UDMA(100)
hdf:<4>hdf: dma_timer_expiry: dma status == 0x41
hdf: DMA timeout error
hdf: 0 bytes in FIFO
hdf: timeout waiting for DMA
hdf: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }

hdf1

The hdd is unusable slow under linux, but it works fine with win2000. I googled for a solution a lot, but i found nothing.

I use 2.6.1 kernel and Debian unstable.
Here is some important part of my kernel's conf:
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_ADMA=y
CONFIG_BLK_DEV_HPT366=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_AUTO=y

PerverzTata

_____________________________________________________________________
Most megnyerheted a Palm Zire 71 kéziszámítógépet, ami digitáli s
fényképező és MP3 lejátszó is egyben. Kattints ide:
http://www.edmax.hu/kerdoiv_2003.php