2.6: No hot_UN_plugging of PCMCIA network cards
There appears to be a problem with unplugging PCMCIA ethernet cards under 2.6. I have to run ifconfig .. down manually before removing the card from its socket, otherwise the system generates unkillable processes, reconnecting the card later does not work and the file systems cannot be unmounted properly.
Running ifconfig ethX down manually solves the problem, but is cumbersome and requires root privileges...
Issue report:
=============
[1.] One line summary of the problem:
Unplugging PCMCIA network cards under kernel 2.6 requires manual ifconfig ethX down first
[2.] Full description of the problem/report:
Under 2.6 kernels (.0-test5, .0-test11, .0, .1-rc1, .1) I need to manually run
ifconfig ethX down
before removing a PCMCIA network card (X=0 in my case, the card in question is a 10Mbit Novell 2000 clone). Otherwise subsequent calls to /sbin/ifconfig will never return and cannot be killed either (-KILL).
This is probably some sort of data corruption issue inside the kernel, but I do not get any Oopses. (And cannot unmount the filesystems properly either, because of unkillable processes keeping them busy.)
Everything works fine with the 2.4 series (2.4.18, 2.4.2[134]).
[3.] Keywords (i.e., modules, networking, kernel):
kernel 2.6, hotplug, pcmcia, network
[4.] Kernel version (from /proc/version):
Linux version 2.6.1 (root@westley) (gcc version 3.3.1 20030626 (Debian prerelease)) #1 Mon Jan 19 20:57:12 CET 2004
[5.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/oops-tracing.txt)
n/a
[6.] A small shell script or example program which triggers the
problem (if possible)
n/a
[7.] Environment
Five year old laptop, cardbus is a TI-PCI1220, see lspci output below. Given the age of the laptop I can probably happily stay with 2.4 for the rest of its life time.
[7.1.] Software (add the output of the ver_linux script here)
sh /usr/src/linux/linux-2.6.1/scripts/ver_linux
If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes.
Linux westley 2.6.1 #1 Mon Jan 19 20:57:12 CET 2004 i586 GNU/Linux
Gnu C 3.3.1 Gnu make 3.80 util-linux 2.11z mount 2.11z module-init-tools 0.9.13 e2fsprogs 1.34-WIP pcmcia-cs 3.1.33 PPP version nfs-utils 1.0.5 Linux C Library 2.3.2 Dynamic linker (ldd) 2.3.2 Procps 3.1.9 Net-tools 1.60 Console-tools 0.2.3 Sh-utils 5.0 Modules Loaded pppoe pppox pcnet_cs 8390 crc32 ppp_generic slhc snd_es18xx snd_pcm snd_page_alloc snd_opl3_lib snd_timer snd_hwdep snd_mpu401_uart snd_rawmidi snd soundcore uhci_hcd usbcore rtc
remark:
PPP is 2.4.2
[7.2.] Processor information (from /proc/cpuinfo):
cat /proc/cpuinfo
processor : 0vendor_id : GenuineIntel
cpu family : 5
model : 8
model name : Mobile Pentium MMX
stepping : 1
cpu MHz : 267.390fdiv_bug : nohlt_bug : nof00f_bug : yescoma_bug : no
fpu : yesfpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr mce cx8 mmx
bogomips : 528.38
[7.3.] Module information (from /proc/modules):
Taken after removing the PCMCIA network card without running
ifconfig ethX down manually before.
cat /proc/modules
pppoe 14272 0 - Live 0xc8c5e000
pppox 3496 1 pppoe, Live 0xc8c59000pcnet_cs 17748 1 - Live 0xc8cb6000
8390 10400 1 pcnet_cs, Live 0xc8c84000
crc32 4288 1 8390, Live 0xc8c81000ppp_generic 25808 2 pppoe,pppox, Live 0xc8c8a000
slhc 7008 1 ppp_generic, Live 0xc8c5b000snd_es18xx 28644 0 - Live 0xc8c79000snd_pcm 94884 1 snd_es18xx, Live 0xc8c96000snd_page_alloc 11268 1 snd_pcm, Live 0xc8c53000snd_opl3_lib 9728 1 snd_es18xx, Live 0xc8c34000snd_timer 24580 2 snd_pcm,snd_opl3_lib, Live 0xc8c71000snd_hwdep 9024 1 snd_opl3_lib, Live 0xc8c30000snd_mpu401_uart 7200 1 snd_es18xx, Live 0xc8c2d000snd_rawmidi 23552 1 snd_mpu401_uart, Live 0xc8c1d000
snd 49156 7 snd_es18xx,snd_pcm,snd_opl3_lib,snd_timer,snd_hwdep,snd_mpu401_uart,snd_rawmidi, Live 0xc8c63000 soundcore 8672 1 snd, Live 0xc8c19000uhci_hcd 31248 0 - Live 0xc8c24000
usbcore 105116 3 uhci_hcd, Live 0xc8c38000
rtc 12504 0 - Live 0xc8c14000
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem) cat /proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-005f : timer
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0220-022f : ES18xx
0376-0376 : ide1
03c0-03df : vesafb
03f6-03f6 : ide0
0800-0807 : ES18xx - CTRL
0cf8-0cff : PCI conf1
1000-103f : 0000:00:07.3
1100-110f : 0000:00:07.1
1100-1107 : ide0
1108-110f : ide1
1400-141f : 0000:00:07.3
4000-40ff : PCI CardBus #01
4400-44ff : PCI CardBus #01
4800-48ff : PCI CardBus #05
4c00-4cff : PCI CardBus #05
f300-f31f : 0000:00:07.2
f300-f31f : uhci_hcd
cat /proc/iomem
00000000-0009efff : System RAM
000a0000-000bffff : Video RAM area
000cc000-000ccfff : Extension ROM
000f0000-000fffff : System ROM
00100000-07ffffff : System RAM
00100000-00263b9e : Kernel code
00263b9f-002f9ebf : Kernel data
10000000-10000fff : 0000:00:0a.0
10000000-10000fff : yenta_socket
10001000-10001fff : 0000:00:0a.1
10001000-10001fff : yenta_socket
10400000-107fffff : PCI CardBus #01
10800000-10bfffff : PCI CardBus #01
10c00000-10ffffff : PCI CardBus #05
11000000-113fffff : PCI CardBus #05
a0000000-a0000fff : card services
c0000000-c3ffffff : 0000:00:08.0
c0000000-c03fffff : vesafb
[7.5.] PCI information ('lspci -vvv' as root)
lspci -vvv
00:00.0 Host bridge: Intel Corp. 430TX - 82439TX MTXC (rev 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
00:07.0 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at 1100 [size=16]
00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 240
Interrupt: pin D routed to IRQ 10
Region 4: I/O ports at f300 [size=32]
00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
00:08.0 VGA compatible controller: S3 Inc. ViRGE/MX (rev 06) (prog-if 00 [VGA])
Subsystem: Unknown device abcd:1100
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (1000ns min, 63750ns max)
Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=64M]
Expansion ROM at 000c0000 [disabled] [size=64K]
00:0a.0 CardBus bridge: Texas Instruments PCI1220 (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168, cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: Memory at 10000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=01, subordinate=04, sec-latency=176
Memory window 0: 10400000-107ff000 (prefetchable)
Memory window 1: 10800000-10bff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
00:0a.1 CardBus bridge: Texas Instruments PCI1220 (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168, cache line size 08
Interrupt: pin B routed to IRQ 10
Region 0: Memory at 10001000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=05, subordinate=08, sec-latency=176
Memory window 0: 10c00000-10fff000 (prefetchable)
Memory window 1: 11000000-113ff000
I/O window 0: 00004800-000048ff
I/O window 1: 00004c00-00004cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
[7.6.] SCSI information (from /proc/scsi/scsi)
n/a
[7.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you think to be relevant):
/sbin/ifdown reports eth0 as unconfigured, this is normal, it also happens under 2.4. The "Hw. address read/write mismap" messages indicate trouble under 2.6...
/var/log/syslog
===============
Jan 19 22:21:22 westley pppd[880]: Connection terminated. Jan 19 22:21:22 westley pppd[880]: Connect time 6.0 minutes. Jan 19 22:21:22 westley pppd[880]: Sent 12425 bytes, received 122043 bytes. Jan 19 22:21:23 westley pppd[880]: Connect time 6.0 minutes. Jan 19 22:21:23 westley pppd[880]: Sent 12425 bytes, received 122043 bytes. Jan 19 22:21:23 westley pppd[880]: Exit. Jan 19 22:21:34 westley cardmgr[314]: executing: './network stop eth0' Jan 19 22:21:34 westley cardmgr[314]: + /sbin/ifdown: interface eth0 not configured Jan 19 22:21:34 westley kernel: Hw. address read/write mismap 0 Jan 19 22:21:34 westley kernel: Hw. address read/write mismap 1 Jan 19 22:21:34 westley kernel: Hw. address read/write mismap 2 Jan 19 22:21:34 westley kernel: Hw. address read/write mismap 3 Jan 19 22:21:34 westley kernel: Hw. address read/write mismap 4 Jan 19 22:21:34 westley kernel: Hw. address read/write mismap 5
/var/log/kern.log
=================
Jan 19 22:08:42 westley kernel: CSLIP: code copyright 1989 Regents of the University of California Jan 19 22:08:42 westley kernel: PPP generic driver version 2.4.2 Jan 19 22:15:01 westley kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean. Jan 19 22:15:01 westley kernel: eth0: NE2000 Compatible: io 0x320, irq 3, hw_addr 00:E0:98:12:F5:47 Jan 19 22:15:23 westley kernel: NET: Registered protocol family 24 Jan 19 22:21:34 westley kernel: Hw. address read/write mismap 0 Jan 19 22:21:34 westley kernel: Hw. address read/write mismap 1 Jan 19 22:21:34 westley kernel: Hw. address read/write mismap 2 Jan 19 22:21:34 westley kernel: Hw. address read/write mismap 3 Jan 19 22:21:34 westley kernel: Hw. address read/write mismap 4 Jan 19 22:21:34 westley kernel: Hw. address read/write mismap 5
/var/log/daemon.log
===================
Jan 19 22:20:50 westley pppd[1121]: Plugin /usr/lib/pppd/2.4.2b3/rp-pppoe.so loaded. Jan 19 22:20:50 westley pppd[1121]: RP-PPPoE plugin version 3.3 compiled against pppd 2.4.2b3 Jan 19 22:21:22 westley pppd[880]: Terminating on signal 2. Jan 19 22:21:22 westley pppd[880]: Couldn't increase MTU to 1500 Jan 19 22:21:22 westley pppd[880]: Couldn't increase MRU to 1500 Jan 19 22:21:22 westley pppd[880]: Connection terminated. Jan 19 22:21:22 westley pppd[880]: Connect time 6.0 minutes. Jan 19 22:21:22 westley pppd[880]: Sent 12425 bytes, received 122043 bytes. Jan 19 22:21:23 westley pppd[880]: Connect time 6.0 minutes. Jan 19 22:21:23 westley pppd[880]: Sent 12425 bytes, received 122043 bytes. Jan 19 22:21:23 westley pppd[880]: Exit. Jan 19 22:21:34 westley cardmgr[314]: executing: './network stop eth0' Jan 19 22:21:34 westley cardmgr[314]: + /sbin/ifdown: interface eth0 not configured
[X.] Other notes, patches, fixes, workarounds:
n/a
Quoted 6 lines · Arne Ahrend
There appears to be a problem with unplugging PCMCIA ethernet cards under 2.6. I have to run ifconfig .. down manually before removing the card from its socket, otherwise the system generates unkillable processes, reconnecting the card later does not work and the file systems cannot be unmounted properly.
It works for me - with pcnet_cs. Do you have ipv6 configured into the kernel?
Anyway, I'd be useful if you can reproduce the unkillable process, then dump the task state (sysrq-t) and send the trace for the hung ifconfig process.
Quoted 3 lines
/sbin/ifdownreports eth0 as unconfigured, this is normal, it also happens under 2.4. The "Hw. address read/write mismap" messages indicate trouble under 2.6...
This merely means that the driver tried to access some register and found that the hardware was already gone.
Signature · 4 lines
Russell King
Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/
maintainer of: 2.6 PCMCIA - http://pcmcia.arm.linux.org.uk/
2.6 Serial coreQuoted 2 lines · On Thu, 22 Jan 2004 21:37:57 +0000 Russell King <[email protected]>…
It works for me - with
pcnet_cs. Do you have ipv6 configured into the kernel?
No.
Quoted 3 lines
Anyway, I'd be useful if you can reproduce the unkillable process, then dump the task state (sysrq-t) and send the trace for the hung ifconfig process.
I had to compile sysrq in first, so it is a different kernel now. At least the kernel data line in /proc/iomem has changed, so I include the new version:/proc/iomem
===========
00000000-0009efff : System RAM
000a0000-000bffff : Video RAM area
000cc000-000ccfff : Extension ROM
000f0000-000fffff : System ROM
00100000-07ffffff : System RAM
00100000-00263fae : Kernel code
00263faf-002faebf : Kernel data
10000000-10000fff : 0000:00:0a.0
10000000-10000fff : yenta_socket
10001000-10001fff : 0000:00:0a.1
10001000-10001fff : yenta_socket
10400000-107fffff : PCI CardBus #01
10800000-10bfffff : PCI CardBus #01
10c00000-10ffffff : PCI CardBus #05
11000000-113fffff : PCI CardBus #05
a0000000-a0000fff : card services
c0000000-c3ffffff : 0000:00:08.0
c0000000-c03fffff : vesafb
After unplugging the card without bringing the interface down manually first I called /sbin/ifconfig which would not return. The trace shows two instances of ifconfig, both with STAT 'D'. The first ifconfig originated from the system attempting to bring the removed interface down:
from /var/log/kern.log
======================
Jan 23 22:16:50 westley kernel: ifconfig D C0320BB0 0 944 935 (NOTLB) Jan 23 22:16:50 westley kernel: c46cfe5c 00000086 c02d417c c0320bb0 c46ce000 c46ce000 c46cfe5c c7d5ad80 Jan 23 22:16:50 westley kernel: c7d5ada0 0000aa02 78145672 000008e8 c7d5b560 c02d81a0 00000000 c46ce000 Jan 23 22:16:50 westley kernel: c7d5b3a0 c0107af9 c02d81a8 00000001 c7d5b3a0 c0114a80 c437befc c02d81a8 Jan 23 22:16:50 westley kernel: Call Trace: Jan 23 22:16:50 westley kernel: [__down+153/288] __down+0x99/0x120 Jan 23 22:16:50 westley kernel: [default_wake_function+0/32] default_wake_function+0x0/0x20 Jan 23 22:16:50 westley kernel: [pcmcia_deregister_client+232/368] pcmcia_deregister_client+0xe8/0x170 Jan 23 22:16:50 westley kernel: [__down_failed+8/12] __down_failed+0x8/0xc Jan 23 22:16:50 westley kernel: [.text.lock.rtnetlink+5/44] .text.lock.rtnetlink+0x5/0x2c Jan 23 22:16:50 westley kernel: [unregister_netdev+10/32] unregister_netdev+0xa/0x20 Jan 23 22:16:50 westley kernel: [__crc_generic_cont_expand+1685282/3842928] pcnet_detach+0x4c/0x90 [pcnet_cs] Jan 23 22:16:50 westley kernel: [__crc_generic_cont_expand+1690335/3842928] pcnet_close+0x49/0x50 [pcnet_cs] Jan 23 22:16:50 westley kernel: [dev_close+125/128] dev_close+0x7d/0x80 Jan 23 22:16:50 westley kernel: [dev_change_flags+81/288] dev_change_flags+0x51/0x120 Jan 23 22:16:50 westley kernel: [devinet_ioctl+633/1488] devinet_ioctl+0x279/0x5d0 Jan 23 22:16:50 westley kernel: [inet_ioctl+132/192] inet_ioctl+0x84/0xc0 Jan 23 22:16:50 westley kernel: [sock_ioctl+222/640] sock_ioctl+0xde/0x280 Jan 23 22:16:50 westley kernel: [sys_ioctl+234/608] sys_ioctl+0xea/0x260 Jan 23 22:16:50 westley kernel: [syscall_call+7/11] syscall_call+0x7/0xb Jan 23 22:16:50 westley kernel: Jan 23 22:16:50 westley kernel: ifconfig D C50973D8 24 945 848 (NOTLB) Jan 23 22:16:50 westley kernel: c437bee4 00000086 c113b9b0 c50973d8 c013c2b3 c431a880 c031adc4 c7793340 Jan 23 22:16:50 westley kernel: c7793360 006eb391 c63e20cc 000008ec c430fb20 c02d81a0 00000000 c437a000 Jan 23 22:16:50 westley kernel: c430f960 c0107af9 c02d81a8 00000001 c430f960 c0114a80 c02d81a8 c46cfe74 Jan 23 22:16:50 westley kernel: Call Trace: Jan 23 22:16:50 westley kernel: [do_no_page+499/928] do_no_page+0x1f3/0x3a0 Jan 23 22:16:50 westley kernel: [__down+153/288] __down+0x99/0x120 Jan 23 22:16:50 westley kernel: [default_wake_function+0/32] default_wake_function+0x0/0x20 Jan 23 22:16:50 westley kernel: [do_page_fault+805/1308] do_page_fault+0x325/0x51c Jan 23 22:16:50 westley kernel: [__down_failed+8/12] __down_failed+0x8/0xc Jan 23 22:16:50 westley kernel: [.text.lock.dev+45/143] .text.lock.dev+0x2d/0x8f Jan 23 22:16:50 westley kernel: [unmap_region+128/208] unmap_region+0x80/0xd0 Jan 23 22:16:50 westley kernel: [inet_ioctl+171/192] inet_ioctl+0xab/0xc0 Jan 23 22:16:50 westley kernel: [sock_ioctl+222/640] sock_ioctl+0xde/0x280 Jan 23 22:16:50 westley kernel: [sys_ioctl+234/608] sys_ioctl+0xea/0x260 Jan 23 22:16:50 westley kernel: [syscall_call+7/11] syscall_call+0x7/0xb
Output of ps axuwww
===================
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 0.4 0.3 1460 496 ? S 21:52 0:06 init [2] root 2 0.0 0.0 0 0 ? SWN 21:52 0:00 [ksoftirqd/0] root 3 0.1 0.0 0 0 ? SW< 21:52 0:02 [events/0] root 4 0.0 0.0 0 0 ? SW< 21:52 0:00 [kblockd/0] root 5 0.0 0.0 0 0 ? SW 21:52 0:00 [kapmd] root 6 0.0 0.0 0 0 ? SW 21:52 0:00 [pdflush] root 7 0.0 0.0 0 0 ? SW 21:52 0:00 [pdflush] root 8 0.0 0.0 0 0 ? SW 21:52 0:00 [kswapd0] root 9 0.0 0.0 0 0 ? SW< 21:52 0:00 [aio/0] root 10 0.0 0.0 0 0 ? SW 21:53 0:00 [pccardd] root 11 0.0 0.0 0 0 ? SW 21:53 0:00 [pccardd] root 12 0.0 0.0 0 0 ? SW 21:53 0:00 [kseriod] root 94 0.0 0.0 0 0 ? SW 21:53 0:00 [khubd] daemon 145 0.0 0.3 1572 424 ? S 21:53 0:00 /sbin/portmap root 233 0.0 0.6 2168 800 ? S 21:53 0:00 /sbin/syslogd root 239 0.0 1.0 2228 1344 ? S 21:53 0:01 /sbin/klogd root 244 0.0 0.4 1464 528 ? S 21:53 0:00 /usr/sbin/apmd -P /etc/apm/apmd_proxy --proxy-timeout 30 root 252 0.0 0.5 2148 716 ? S 21:53 0:00 /usr/sbin/inetd daemon 285 0.0 1.0 4000 1352 ? S 21:53 0:00 lpd Waiting root 319 0.0 0.5 1480 700 ? S 21:53 0:00 /sbin/cardmgr -C config-2.4 root 326 0.0 1.1 2992 1404 ? S 21:53 0:00 /usr/sbin/sshd root 336 0.0 2.3 4232 2940 ? S 21:53 0:00 /usr/bin/X11/xfs -daemon root 390 0.0 0.4 1740 620 ? S 21:53 0:00 /bin/ksh /etc/rc2.d/S20xprint posix_sh_forced start root 392 0.0 1.6 4404 2044 ? S 21:53 0:00 /usr/X11R6/bin/Xprt -ac -pn -nolisten tcp -audit 4 -fp /usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/100dpi,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/misc :64 root 393 0.0 0.3 1456 408 ? S 21:53 0:00 tee -a /dev/null root 394 0.0 0.3 1448 392 ? S 21:53 0:00 logger -p lpr.notice -t Xprt_64 root 405 0.0 0.7 2284 916 ? S 21:53 0:00 /sbin/rpc.statd root 409 0.0 0.6 2544 884 ? S 21:53 0:00 /usr/sbin/rpc.nfsd root 411 0.0 0.7 2548 900 ? S 21:53 0:00 /usr/sbin/rpc.mountd daemon 421 0.0 0.4 1648 628 ? S 21:53 0:00 /usr/sbin/atd root 424 0.0 0.5 1716 724 ? S 21:53 0:00 /usr/sbin/cron root 438 0.0 0.5 2420 672 ? S 21:53 0:00 /usr/bin/kdm root 445 0.7 7.5 15276 9576 ? S< 21:53 0:11 /usr/X11R6/bin/X -dpi 75 -nolisten tcp vt7 -auth /var/lib/kdm/authfiles/A:0-Tqxjvk root 469 0.0 1.2 2640 1556 tty2 S 21:53 0:00 -bash root 470 0.0 0.3 1460 484 tty3 S 21:53 0:00 /sbin/getty 38400 tty3 root 471 0.0 0.3 1460 484 tty4 S 21:53 0:00 /sbin/getty 38400 tty4 root 472 0.0 0.3 1460 484 tty5 S 21:53 0:00 /sbin/getty 38400 tty5 root 473 0.0 0.3 1460 484 tty6 S 21:53 0:00 /sbin/getty 38400 tty6 root 829 0.0 0.6 2420 800 ? S 22:09 0:00 -:0 root 832 0.1 5.0 13316 6384 ? S 22:09 0:00 /usr/bin/kdm_greet root 848 0.5 1.2 2648 1608 tty1 S 22:09 0:02 -bash root 934 0.0 0.9 2488 1148 ? S 22:16 0:00 sh -c ./network stop eth0 2>&1 root 935 0.1 1.0 2620 1360 ? S 22:16 0:00 /bin/sh ./network stop eth0 root 944 0.0 0.3 1488 416 ? D 22:16 0:00 /sbin/ifconfig eth0 down root 945 0.0 0.3 1488 484 tty1 D 22:16 0:00 ifconfig root 951 0.0 0.6 2832 844 tty2 R 22:18 0:00 ps axuwww
--
Arne Ahrend
Quoted 4 lines · Arne Ahrend
Quoted 2 lines
It works for me - with
pcnet_cs. Do you have ipv6 configured into the kernel?No.
Argh, it seems that several patches which were in the netdrv experimental tree never got merged.
Jeff - what's the situation with the net driver experimental tree? Could the DEV_STALE_CONFIG patches from around December time be merged please?
Signature · 4 lines
Russell King
Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/
maintainer of: 2.6 PCMCIA - http://pcmcia.arm.linux.org.uk/
2.6 Serial coreQuoted 8 lines · Russell King
Quoted 4 lines · Arne Ahrend
Quoted 2 lines
It works for me - with
pcnet_cs. Do you have ipv6 configured into the kernel?No.
Quoted 6 lines
Argh, it seems that several patches which were in the netdrv experimental tree never got merged.
Jeff - what's the situation with the net driver experimental tree? Could the
DEV_STALE_CONFIGpatches from around December time be merged please?
It's slowly being merged into upstream, but it's gonna take time. This stuff (along with pent-up stuff from other maintainers) has to be spread out over a few releases.
I'll dig out the csets you're referring to and make sure they're in the next batch, post 2.6.2 release.
Jeff
Quoted 8 lines · Russell King
Quoted 4 lines · Arne Ahrend
Quoted 2 lines
It works for me - with
pcnet_cs. Do you have ipv6 configured into the kernel?No.
Quoted 6 lines
Argh, it seems that several patches which were in the netdrv experimental tree never got merged.
Jeff - what's the situation with the net driver experimental tree? Could the
DEV_STALE_CONFIGpatches from around December time be merged please?
All my netdev patches are in upstream now, FWIW.
Jeff
Quoted 9 lines · Jeff Garzik
Quoted 8 lines · Russell King
Quoted 4 lines · Arne Ahrend
Quoted 2 lines
It works for me - with
pcnet_cs. Do you have ipv6 configured into the kernel?No.
Quoted 6 lines
Quoted 6 lines
Argh, it seems that several patches which were in the netdrv experimental tree never got merged.
Jeff - what's the situation with the net driver experimental tree? Could the
DEV_STALE_CONFIGpatches from around December time be merged please?
I've been experiencing hangs with -mm kernels and my CardBus 3Com NIC when resuming from APM suspend to disk which seem to be caused by the 3c59x driver. The hang just gets resolved by unplugging, then plugging the CardBus NIC. This doesn't happen with vanilla tree, however.
I've found that reverting 3c9x-enable_wol.patch fixes this situation for me.
Quoted 8 lines · Felipe Alfaro Solana
I've been experiencing hangs with -mm kernels and my CardBus 3Com NIC when resuming from APM suspend to disk which seem to be caused by the 3c59x driver. The hang just gets resolved by unplugging, then plugging the CardBus NIC. This doesn't happen with vanilla tree, however.
I've found that reverting 3c9x-enable_wol.patch fixes this situation for me.
Sigh. Cannot you add the enable_wol module parameter?
Quoted 11 lines · Andrew Morton
Quoted 8 lines · Felipe Alfaro Solana
I've been experiencing hangs with -mm kernels and my CardBus 3Com NIC when resuming from APM suspend to disk which seem to be caused by the 3c59x driver. The hang just gets resolved by unplugging, then plugging the CardBus NIC. This doesn't happen with vanilla tree, however.
I've found that reverting 3c9x-enable_wol.patch fixes this situation for me.
Sigh. Cannot you add the
enable_wolmodule parameter?
Yup! Reapplying 3c9x-enable_wol.patch and supplying "enable_wol=1" to 3c95x.ko seems to solve the problem. It seems that 3c59x power management is only enable if wake-on-LAN is enabled... why?
Now, dual booting between vanilla and -mm kernels causes problems when loading the module since vanilla doesn't yet recognize "enable_wol", but this is only a minor problem.
Thanks!
Quoted 12 lines · On Wed, 18 Feb 2004 19:21:00 -0500 Jeff Garzik <[email protected]> wrote:
Quoted 11 lines · Russell King
Quoted 4 lines · Arne Ahrend
Quoted 2 lines
It works for me - with
pcnet_cs. Do you have ipv6 configured into the kernel?No.
Argh, it seems that several patches which were in the netdrv experimental tree never got merged.
Quoted 10 lines
Quoted 3 lines
Jeff - what's the situation with the net driver experimental tree? Could the
DEV_STALE_CONFIGpatches from around December time be merged please?All my netdev patches are in upstream now, FWIW.
Jeff
I have just upgraded from 2.6.3-rc2 (which was the first post 2.4 kernel to fix the problem I had) to 2.6.3. Everything is working perfectly. Many thanks!
Arne