Problem with IDE taskfile
Hi all :))
In my logs I have the following message:
<28>Feb 2 12:18:41 kernel: hda: ST340016A, ATA DISK drive
<28>Feb 2 12:18:41 kernel: hdb: ST34310A, ATA DISK drive
<28>Feb 2 12:18:41 kernel: blk: queue c02d0020, I/O limit 4095Mb (mask 0xffffffff)
<28>Feb 2 12:18:41 kernel: blk: queue c02d015c, I/O limit 4095Mb (mask 0xffffffff)
[...]
<28>Feb 2 12:18:41 kernel: hda: attached ide-disk driver.
<28>Feb 2 12:18:41 kernel: hda: host protected area => 1
<30>Feb 2 12:18:41 kernel: hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100)
<28>Feb 2 12:18:41 kernel: hdb: attached ide-disk driver.
<28>Feb 2 12:18:41 kernel: hdb: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
<28>Feb 2 12:18:41 kernel: hdb: task_no_data_intr: error=0x04 { DriveStatusError }
<30>Feb 2 12:18:41 kernel: hdb: 8420832 sectors (4311 MB) w/512KiB Cache, CHS=524/255/63, UDMA(33) The problem is that message from function 'task_no_data_intr'.
What can be the problem? Should I worry about it? Is the drive damaged?
I've tested with another hard disk from the same time (the same
model but 3GB) and the same messages appear. They doesn't appear with a disk of 10GB, same brand, a bit newer than the other two. And obviously, it doesn't happen with the 40GB disk which is my hda...
Thanks a lot in advance.
Raúl Núñez de Arenas Coronado
Signature · 2 lines
Linux Registered User 88736 http://www.pleyades.net & http://raul.pleyades.net/
Quoted 9 lines
<28>Feb 2 12:18:41 kernel: hdb: task_no_data_intr: status=3D0x51 { Dri= veReady SeekComplete Error } <28>Feb 2 12:18:41 kernel: hdb: task_no_data_intr: error=3D0x04 { Driv= eStatusError } <30>Feb 2 12:18:41 kernel: hdb: 8420832 sectors (4311 MB) w/512KiB Cac=he, CHS=3D524/255/63, UDMA(33)
The problem is that message from function '
task_no_data_intr'.
What can be the problem?
The drive doesn't understand the command it was sent.
Quoted 1 line
Should I worry about it?
No.
Quoted 2 lines
Is the drive
damaged?
No.
Quoted 4 lines
I've tested with another hard disk from the same time (the same
model but 3GB) and the same messages appear. They doesn't appear with a disk of 10GB, same brand, a bit newer than the other two. And obviously, it doesn't happen with the 40GB disk which is my hda...
Old drives don't support all of the commands that new drives do. It's a diagnostic message.
John.
Hi John :)
* John Bradford <[email protected]> dixit:
Quoted 7 lines
Quoted 6 lines
<28>Feb 2 12:18:41 kernel: hdb: task_no_data_intr: status=3D0x51 { Dri= veReady SeekComplete Error } <28>Feb 2 12:18:41 kernel: hdb: task_no_data_intr: error=3D0x04 { Driv=eStatusError }
The problem is that message from function 'task_no_data_intr'.
What can be the problem?The drive doesn't understand the command it was sent.
After looking at the sources I thought the same, but I wasn't
sure and the message is frightening ;))
Thanks for the explanation, John :)
Raúl Núñez de Arenas Coronado
Signature · 2 lines
Linux Registered User 88736 http://www.pleyades.net & http://raul.pleyades.net/
Quoted 7 lines · DervishD
<28>Feb 2 12:18:41 kernel: hdb: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error } <28>Feb 2 12:18:41 kernel: hdb: task_no_data_intr: error=0x04 { DriveStatusError } <30>Feb 2 12:18:41 kernel: hdb: 8420832 sectors (4311 MB) w/512KiB Cache, CHS=524/255/63, UDMA(33)The problem is that message from function '
task_no_data_intr'.
What can be the problem? Should I worry about it? Is the drive damaged?
51/04 is the drive saying "I don't understand what you asked me to do". Ie, a command that was added to a later revision of the ATA standard than your drive conforms to. Judging by the size of the drive, I'd guess it's quite old 8-)
Dave
Hi Dave :)
* Dave Jones <[email protected]> dixit:
Quoted 4 lines
Quoted 3 lines
<28>Feb 2 12:18:41 kernel: hdb: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error } <28>Feb 2 12:18:41 kernel: hdb: task_no_data_intr: error=0x04 { DriveStatusError } <30>Feb 2 12:18:41 kernel: hdb: 8420832 sectors (4311 MB) w/512KiB Cache, CHS=524/255/63, UDMA(33)51/04 is the drive saying "I don't understand what you asked me to do".
OK. The codes are very self-explanatory XDD Thanks for the
explanation :)
Quoted 3 lines
Ie, a command that was added to a later revision of the ATA standard than your drive conforms to. Judging by the size of the drive, I'd guess it's quite old 8-)
Not very old, but maybe from a 'difficult time' when the
manufacturer switched from one standard to another. BTW, my entire Linux box with all my data, fills perfectly in 4GB ;)) Fortunately, with Linux, you don't need a monster HD for doing everyday job :) Y use a 40GB main disk drive to store a mirror for my favourite distros.
Again, thanks a lot for your explanation :)
Raúl Núñez de Arenas Coronado
Signature · 2 lines
Linux Registered User 88736 http://www.pleyades.net & http://raul.pleyades.net/
It means the drive aborted the unsupported command set.
Andre Hedrick
LAD Storage Consulting Group
Quoted 23 lines · Dave Jones
Quoted 7 lines · DervishD
<28>Feb 2 12:18:41 kernel: hdb: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error } <28>Feb 2 12:18:41 kernel: hdb: task_no_data_intr: error=0x04 { DriveStatusError } <30>Feb 2 12:18:41 kernel: hdb: 8420832 sectors (4311 MB) w/512KiB Cache, CHS=524/255/63, UDMA(33)The problem is that message from function '
task_no_data_intr'.
What can be the problem? Should I worry about it? Is the drive damaged?51/04 is the drive saying "I don't understand what you asked me to do". Ie, a command that was added to a later revision of the ATA standard than your drive conforms to. Judging by the size of the drive, I'd guess it's quite old 8-)
Dave
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Quoted 17 lines · DervishD
Hi all :))
In my logs I have the following message:
<28>Feb 2 12:18:41 kernel: hda: ST340016A, ATA DISK drive <28>Feb 2 12:18:41 kernel: hdb: ST34310A, ATA DISK drive <28>Feb 2 12:18:41 kernel: blk: queue c02d0020, I/O limit 4095Mb (mask 0xffffffff) <28>Feb 2 12:18:41 kernel: blk: queue c02d015c, I/O limit 4095Mb (mask 0xffffffff) [...] <28>Feb 2 12:18:41 kernel: hda: attached ide-disk driver. <28>Feb 2 12:18:41 kernel: hda: host protected area => 1 <30>Feb 2 12:18:41 kernel: hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100) <28>Feb 2 12:18:41 kernel: hdb: attached ide-disk driver. <28>Feb 2 12:18:41 kernel: hdb: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error } <28>Feb 2 12:18:41 kernel: hdb: task_no_data_intr: error=0x04 { DriveStatusError } <30>Feb 2 12:18:41 kernel: hdb: 8420832 sectors (4311 MB) w/512KiB Cache, CHS=524/255/63, UDMA(33)
Quoted 3 lines
The problem is that message from function '
task_no_data_intr'.
What can be the problem? Should I worry about it? Is the drive damaged?
Nope. This is a bug in the 2.4.x ide driver. I sent in a patch for it a while back that made it into 2.6, but not into 2.4. Basically, the 2.4.x ide driver always asks the drive if it supports HPA. In this case, your drive is old and doesn't know what an HPA is, and complains. Some older drives get confused and have to be power cycled when this happens.
http://lkml.org/lkml/2003/8/22/193
-Erik
--
Erik B. Andersen http://codepoet-consulting.com/
--This message was written using 73% post-consumer electrons--