Skip to contentSkip to conversation

uml-fixes-2.6.2-rc3-mm1-A2

PATCH New Ingo Molnar 1 participant 1 message Feb 3, 2004

Subsystems (2)
Driver core User-mode Linux (UML)
lore
Share & tools
lore

Ingo Molnar

author
#0 lore raw

PATCH 1/1 uml-fixes-2.6.2-rc3-mm1-A2

the attached patch fixes UML on 2.6.2-rc3-mm1:

- generic: dmapool.o depends on CONFIG_PCI

- x86: reshuffle the way TASK_SIZE is defined on x86. [UML relied on a specific order of definitions within the x86 header files, the 4/4 patch broke this assumption.]

- UML: sys_call_table.c: syscall layout changed

- UML: um_arch.c: handle_sysrq() changed

UML compiles & works fine with this patch applied.

Ingo

drivers/base/Makefile renamed from drivers/base/Makefile.orig +2 -1
@@ -2,7 +2,8 @@
 
 obj-y			:= core.o sys.o interface.o bus.o \
 			   driver.o class.o class_simple.o platform.o \
-			   cpu.o firmware.o init.o map.o dmapool.o
+			   cpu.o firmware.o init.o map.o
+obj-$(CONFIG_PCI)	+= dmapool.o
 obj-y			+= power/
 obj-$(CONFIG_FW_LOADER)	+= firmware_class.o
 obj-$(CONFIG_NUMA)	+= node.o
arch/i386/kernel/head.S renamed from arch/i386/kernel/head.S.orig +1 -0
@@ -13,6 +13,7 @@
 #include <linux/linkage.h>
 #include <asm/segment.h>
 #include <asm/page.h>
+#include <asm/processor.h>
 #include <asm/pgtable.h>
 #include <asm/desc.h>
 #include <asm/cache.h>
arch/i386/kernel/vmlinux.lds.S renamed from arch/i386/kernel/vmlinux.lds.S.orig +1 -0
@@ -5,6 +5,7 @@
 #include <asm-generic/vmlinux.lds.h>
 #include <linux/config.h>
 #include <asm/page.h>
+#include <asm/processor.h>
 #include <asm/asm_offsets.h>
 	
 OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386")
arch/i386/boot/setup.S renamed from arch/i386/boot/setup.S.orig +1 -0
@@ -61,6 +61,7 @@
 #include <asm/e820.h>
 #include <asm/edd.h>    
 #include <asm/page.h>
+#include <asm/processor.h>
 	
 /* Signature words to ensure LILO loaded us right */
 #define SIG1	0xAA55
arch/um/kernel/sys_call_table.c renamed from arch/um/kernel/sys_call_table.c.orig +2 -3
@@ -151,7 +151,6 @@ extern syscall_handler_t sys_mlockall;
 extern syscall_handler_t sys_munlockall;
 extern syscall_handler_t sys_sched_setparam;
 extern syscall_handler_t sys_sched_getparam;
-extern syscall_handler_t sys_sched_setscheduler;
 extern syscall_handler_t sys_sched_getscheduler;
 extern syscall_handler_t sys_sched_get_priority_max;
 extern syscall_handler_t sys_sched_get_priority_min;

@@ -275,7 +274,7 @@ extern syscall_handler_t um_mount;
 extern syscall_handler_t um_time;
 extern syscall_handler_t um_stime;
 
-#define LAST_GENERIC_SYSCALL __NR_remap_file_pages
+#define LAST_GENERIC_SYSCALL __NR_sys_fadvise64_64
 
 #if LAST_GENERIC_SYSCALL > LAST_ARCH_SYSCALL
 #define LAST_SYSCALL LAST_GENERIC_SYSCALL

@@ -442,7 +441,7 @@ syscall_handler_t *sys_call_table[] = {
 	[ __NR_munlockall ] = sys_munlockall,
 	[ __NR_sched_setparam ] = sys_sched_setparam,
 	[ __NR_sched_getparam ] = sys_sched_getparam,
-	[ __NR_sched_setscheduler ] = sys_sched_setscheduler,
+	[ __NR_sched_setscheduler ] = (syscall_handler_t *) sys_sched_setscheduler,
 	[ __NR_sched_getscheduler ] = sys_sched_getscheduler,
 	[ __NR_sched_yield ] = (syscall_handler_t *) yield,
 	[ __NR_sched_get_priority_max ] = sys_sched_get_priority_max,
arch/um/kernel/um_arch.c renamed from arch/um/kernel/um_arch.c.orig +1 -1
@@ -393,7 +393,7 @@ static int panic_exit(struct notifier_bl
 		      void *unused2)
 {
 #ifdef CONFIG_MAGIC_SYSRQ
-	handle_sysrq('p', &current->thread.regs, NULL, NULL);
+	handle_sysrq('p', &current->thread.regs, NULL);
 #endif
 	machine_halt();
 	return(0);
include/asm-i386/page.h renamed from include/asm-i386/page.h.orig +0 -24
@@ -79,30 +79,6 @@ typedef struct { unsigned long pgprot; }
 #define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE-1)&PAGE_MASK)
 
 /*
- * This handles the memory map.. We could make this a config
- * option, but too many people screw it up, and too few need
- * it.
- *
- * A __PAGE_OFFSET of 0xC0000000 means that the kernel has
- * a virtual address space of one gigabyte, which limits the
- * amount of physical memory you can use to about 950MB. 
- *
- * If you want more physical memory than this then see the CONFIG_HIGHMEM4G
- * and CONFIG_HIGHMEM64G options in the kernel configuration.
- *
- * Note: on PAE the kernel must never go below 32 MB, we use the
- * first 8 entries of the 2-level boot pgd for PAE magic.
- */
-
-#ifdef CONFIG_X86_4G_VM_LAYOUT
-#define __PAGE_OFFSET		(0x02000000)
-#define TASK_SIZE		(0xff000000)
-#else
-#define __PAGE_OFFSET		(0xc0000000)
-#define TASK_SIZE		(0xc0000000)
-#endif
-
-/*
  * This much address space is reserved for vmalloc() and iomap()
  * as well as fixmap mappings.
  */
include/asm-i386/processor.h renamed from include/asm-i386/processor.h.orig +28 -0
@@ -7,6 +7,8 @@
 #ifndef __ASM_I386_PROCESSOR_H
 #define __ASM_I386_PROCESSOR_H
 
+#ifndef __ASSEMBLY__
+
 #include <asm/vm86.h>
 #include <asm/math_emu.h>
 #include <asm/segment.h>

@@ -649,4 +651,30 @@ extern void select_idle_routine(const st
 #define ARCH_HAS_SCHED_WAKE_BALANCE
 #endif
 
+#endif /* ! __ASSEMBLY__ */
+
+/*
+ * This handles the memory map.. We could make this a config
+ * option, but too many people screw it up, and too few need
+ * it.
+ *
+ * A __PAGE_OFFSET of 0xC0000000 means that the kernel has
+ * a virtual address space of one gigabyte, which limits the
+ * amount of physical memory you can use to about 950MB. 
+ *
+ * If you want more physical memory than this then see the CONFIG_HIGHMEM4G
+ * and CONFIG_HIGHMEM64G options in the kernel configuration.
+ *
+ * Note: on PAE the kernel must never go below 32 MB, we use the
+ * first 8 entries of the 2-level boot pgd for PAE magic.
+ */
+
+#ifdef CONFIG_X86_4G_VM_LAYOUT
+#define __PAGE_OFFSET		(0x02000000)
+#define TASK_SIZE		(0xff000000)
+#else
+#define __PAGE_OFFSET		(0xc0000000)
+#define TASK_SIZE		(0xc0000000)
+#endif
+
 #endif /* __ASM_I386_PROCESSOR_H */