Skip to contentSkip to conversation

Asus L3500D

DISCUSSION Marcin 1 participant 1 message Feb 5, 2004 ACPI

lore
Share & tools
lore

Marcin

author
#0 lore raw

I have Asus L3500D (Athlon XP-M 2500+).
If I set acpi=off fan speed is "automaticaly" adapted to the temeperature but I can't read (because of lack of ACPI) battery status or temperature. (BIOS doesn't report apm at all, acpi only).

If I turn acpi on, everything is detected, but the fan is "dead" (or rather at the "boot" speed - if I reboot "hot" processor it works all the time at the same speed). Of course if I use more processor power (higher frequency) my machine turns off after several minuts.

If I send it to sleep (echo 1 > /proc/acpi/sleep) and resume, the fan is adjusted to correct speed.

If the temperature is high enough (according to trip_points) I get "device is not power managable".

									M.

-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn