2.6.2 wacom not working from /etc/modules
Hello,
I have the strange problem that the wacom driver in 2.6.2 does not work if loaded from /etc/modules. If loaded "by hand" after the system is up it works fine.
/proc/bus/input/devices is exactly the same in both cases:
[...]
I: Bus=0003 Vendor=056a Product=0042 Version=0126
N: Name="Wacom Intuos2 6x8"
P: Phys=usb-0000:00:0c.0-1/input0
H: Handlers=mouse1 event3
B: EV=1b
B: KEY=1cdf 0 1f0000 0 0 0 0 0 0 0 0
B: ABS=f000163
B: MSC=1
but if loaded from /etc/modules neither mouse1 nor event3 gives any sign of the wacom beeing alive. syslog entries are the same, but in different order:
input: PC Speaker
input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
input: AT Translated Set 2 keyboard on isa0060/serio0
input: Wacom Intuos2 6x8 on usb-0000:00:0c.0-1 drivers/usb/core/usb.c: registered new driver wacom drivers/usb/input/wacom.c: v1.30:USB Wacom Graphire and Wacom Intuos tablet driver
input: PC Speaker
input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
input: AT Translated Set 2 keyboard on isa0060/serio0 drivers/usb/core/usb.c: registered new driver wacom drivers/usb/input/wacom.c: v1.30:USB Wacom Graphire and Wacom Intuos tablet driver
input: Wacom Intuos2 6x8 on usb-0000:00:0c.0-1
System is a dual PIII, with stock 2.6.2-kernel
BTW: I'm not subscribed to the list.
MfG
bmg
Signature · 3 lines
"Des is völlig wurscht, was heut beschlos- | M G Berberich sen wird: I bin sowieso dagegn!" | [email protected] (SPD-Stadtrat Kurt Schindler; Regensburg) |
On Sat, 7 Feb 2004 20:00:39 +0100 M G Berberich <[email protected]> wrote:
| Hello, | | I have the strange problem that the wacom driver in 2.6.2 does not | work if loaded from /etc/modules. If loaded "by hand" after the system | is up it works fine. | | /proc/bus/input/devices is exactly the same in both cases: | | [...] | | I: Bus=0003 Vendor=056a Product=0042 Version=0126 | N: Name="Wacom Intuos2 6x8" | P: Phys=usb-0000:00:0c.0-1/input0 | H: Handlers=mouse1 event3 | B: EV=1b | B: KEY=1cdf 0 1f0000 0 0 0 0 0 0 0 0 | B: ABS=f000163 | B: MSC=1 | | but if loaded from /etc/modules neither mouse1 nor event3 gives any | sign of the wacom beeing alive. syslog entries are the same, but in | different order: | | input: PC Speaker | input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1 | input: AT Translated Set 2 keyboard on isa0060/serio0 | input: Wacom Intuos2 6x8 on usb-0000:00:0c.0-1 | drivers/usb/core/usb.c: registered new driver wacom | drivers/usb/input/wacom.c: v1.30:USB Wacom Graphire and Wacom Intuos tablet driver | | input: PC Speaker | input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1 | input: AT Translated Set 2 keyboard on isa0060/serio0 | drivers/usb/core/usb.c: registered new driver wacom | drivers/usb/input/wacom.c: v1.30:USB Wacom Graphire and Wacom Intuos tablet driver | input: Wacom Intuos2 6x8 on usb-0000:00:0c.0-1 | | System is a dual PIII, with stock 2.6.2-kernel | | BTW: I'm not subscribed to the list.
Just to clarify, are you referring to /etc/modules.conf or /etc/modprobe.conf ? /etc/modules.conf is no longer used by the current module-init-tools, it must be converted to /etc/modprobe.conf .
--
~Randy
Am Sunday, den 08. February 2004 20:09:21 schrieb Randy.Dunlap:
Quoted 43 lines · On Sat, 7 Feb 2004 20:00:39 +0100 M G Berberich <[email protected]>…
| Hello, | | I have the strange problem that the wacom driver in 2.6.2 does not | work if loaded from /etc/modules. If loaded "by hand" after the system | is up it works fine. | | /proc/bus/input/devices is exactly the same in both cases: | | [...] | | I: Bus=0003 Vendor=056a Product=0042 Version=0126 | N: Name="Wacom Intuos2 6x8" | P: Phys=usb-0000:00:0c.0-1/input0 | H: Handlers=mouse1 event3 | B: EV=1b | B: KEY=1cdf 0 1f0000 0 0 0 0 0 0 0 0 | B: ABS=f000163 | B: MSC=1 | | but if loaded from /etc/modules neither mouse1 nor event3 gives any | sign of the wacom beeing alive. syslog entries are the same, but in | different order: | | input: PC Speaker | input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1 | input: AT Translated Set 2 keyboard on isa0060/serio0 | input: Wacom Intuos2 6x8 on usb-0000:00:0c.0-1 | drivers/usb/core/usb.c: registered new driver wacom | drivers/usb/input/wacom.c: v1.30:USB Wacom Graphire and Wacom Intuos tablet driver | | input: PC Speaker | input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1 | input: AT Translated Set 2 keyboard on isa0060/serio0 | drivers/usb/core/usb.c: registered new driver wacom | drivers/usb/input/wacom.c: v1.30:USB Wacom Graphire and Wacom Intuos tablet driver | input: Wacom Intuos2 6x8 on usb-0000:00:0c.0-1 | | System is a dual PIII, with stock 2.6.2-kernel | | BTW: I'm not subscribed to the list.
Quoted 3 lines
Just to clarify, are you referring to
/etc/modules.confor/etc/modprobe.conf?/etc/modules.confis no longer used by the current module-init-tools, it must be converted to/etc/modprobe.conf.
No I'm referring to /etc/modules.
A file where you can list modules that get loaded at boot-time.
MfG
bmg
Signature · 3 lines
"Des is völlig wurscht, was heut beschlos- | M G Berberich sen wird: I bin sowieso dagegn!" | [email protected] (SPD-Stadtrat Kurt Schindler; Regensburg) | www.fmi.uni-passau.de/~berberic