add a Pentium M config option
PATCH 1/1 add a Pentium M config option
Hi Linus,
the patch below is in -mm for some time.
Could you apply it?
TIA
Adrian
Support Pentium M and Pentium-4 M :
- add MPENTIUMM (equivalent to PENTIUMIII except for a bigger X86_L1_CACHE_SHIFT)
- document that MPENTIUM4 is the right choice for a Pentium-4 M
diffstat output:
arch/i386/Kconfig | 28 +++++++++++++++++----------- arch/i386/Makefile | 1 + include/asm-i386/module.h | 2 ++ 3 files changed, 20 insertions(+), 11 deletions(-)
arch/i386/Makefile renamed from arch/i386/Makefile~pentium-m-support +1 -0
@@ -34,6 +34,7 @@ cflags-$(CONFIG_M586MMX) += $(call check cflags-$(CONFIG_M686) += -march=i686 cflags-$(CONFIG_MPENTIUMII) += $(call check_gcc,-march=pentium2,-march=i686) cflags-$(CONFIG_MPENTIUMIII) += $(call check_gcc,-march=pentium3,-march=i686) +cflags-$(CONFIG_MPENTIUMM) += $(call check_gcc,-march=pentium3,-march=i686) cflags-$(CONFIG_MPENTIUM4) += $(call check_gcc,-march=pentium4,-march=i686) cflags-$(CONFIG_MK6) += $(call check_gcc,-march=k6,-march=i586) # Please note, that patches that add -march=athlon-xp and friends are pointless.
include/asm-i386/module.h renamed from include/asm-i386/module.h~pentium-m-support +2 -0
@@ -26,6 +26,8 @@ struct mod_arch_specific#define MODULE_PROC_FAMILY "PENTIUMII "#elif definedCONFIG_MPENTIUMIII #define MODULE_PROC_FAMILY "PENTIUMIII " +#elif definedCONFIG_MPENTIUMM +#define MODULE_PROC_FAMILY "PENTIUMM "#elif definedCONFIG_MPENTIUM4 #define MODULE_PROC_FAMILY "PENTIUM4 "#elif definedCONFIG_MK6
arch/i386/Kconfig renamed from arch/i386/Kconfig.old +17 -11
@@ -222,14 +222,20 @@ extended prefetch instructions in addition to the Pentium II extensions. +config MPENTIUMM + bool "Pentium M" + help + Select this for Intel Pentium M (not Pentium-4 M) + notebook chips. + config MPENTIUM4 - bool "Pentium-4/Celeron(P4-based)/Xeon" + bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/Xeon" help - Select this for Intel Pentium 4 chips. This includes both - the Pentium 4 and P4-based Celeron chips. This option - enables compile flags optimized for the chip, uses the - correct cache shift, and applies any applicable Pentium III - optimizations. + Select this for Intel Pentium 4 chips. This includes the + Pentium 4, P4-based Celeron and Xeon, and Pentium-4 M + (not Pentium M) chips. This option enables compile flags + optimized for the chip, uses the correct cache shift, and + applies any applicable Pentium III optimizations. config MK6 bool "K6/K6-II/K6-III"
@@ -330,7 +336,7 @@ default "7" if MPENTIUM4 || X86_GENERIC default "4" if MELAN || M486 || M386 default "5" if MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCRUSOE || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 - default "6" if MK7 || MK8 + default "6" if MK7 || MK8 || MPENTIUMM config RWSEM_GENERIC_SPINLOCK bool
@@ -379,17 +385,17 @@ config X86_GOOD_APIC bool - depends on MK7 || MPENTIUM4 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 + depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 default y config X86_INTEL_USERCOPY bool - depends on MPENTIUM4 || MPENTIUMIII || MPENTIUMII || M586MMX || X86_GENERIC || MK8 || MK7 + depends on MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M586MMX || X86_GENERIC || MK8 || MK7 default y config X86_USE_PPRO_CHECKSUM bool - depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 + depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 default y config X86_USE_3DNOW
@@ -571,7 +577,7 @@ config X86_TSC bool - depends on (MWINCHIP3D || MWINCHIP2 || MCRUSOE || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2) && !X86_NUMAQ + depends on (MWINCHIP3D || MWINCHIP2 || MCRUSOE || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2) && !X86_NUMAQ default y config X86_MCE