Frequency switch latency
This is a little off-topic. In case it does not belong here: Sorry.
I am currently working on a kernel-compiler cooperation for dynamic voltage/frequency scaling. I am doing this for Intel's XScale PXA architecture. It has turned out that changing the frequency on the XScale takes some hundred microseconds, but voltage scaling takes 5-8 milliseconds (I am working with some evaluation board with DVS support). Are there numbers for PowerNow or SpeedStep on the web? I could not find any.
Another question: I have seen that there are cases in which energy can be saved by not only changing the CPU frequency/ voltage but also the memory frequency. This is especially true when a process with high cache efficiency is executed. We simply do not need the memory then. Are there any plans for integrating memory speed into the CPUfreq code sometime in the future?
Regards
Stefan
Quoted 9 lines · Stefan Buettcher
This is a little off-topic. In case it does not belong here: Sorry.
I am currently working on a kernel-compiler cooperation for dynamic voltage/frequency scaling. I am doing this for Intel's XScale PXA architecture. It has turned out that changing the frequency on the XScale takes some hundred microseconds, but voltage scaling takes 5-8 milliseconds (I am working with some evaluation board with DVS support). Are there numbers for PowerNow or SpeedStep on the web? I could not find any.
AFAIK, there are no such numbers available even though this is a well-known phenomenon. SpeedStep and PowerNow (usually) have fixed frequency/voltage pairs with different voltages for different frequencies, so there is no difference in latencies between different "states"...
Quoted 7 lines
Another question: I have seen that there are cases in which energy can be saved by not only changing the CPU frequency/ voltage but also the memory frequency. This is especially true when a process with high cache efficiency is executed. We simply do not need the memory then. Are there any plans for integrating memory speed into the CPUfreq code sometime in the future?
Not yet... it hasn't even been discussed yet on this list AFAIK. Nonetheless, IMO it should at least be interconnected to cpufreq or even become part of cpufreq.
Dominik
_______________________________________________
Cpufreq mailing list
[email protected]
http://www.linux.org.uk/mailman/listinfo/cpufreq