Skip to contentSkip to conversation

2.6.1-"kernel panic: init not found"

DISCUSSION Trideepraj Roychoudhury 2 participants 2 messages Feb 9, 2004

lore
Share & tools
lore
#0 lore raw

Hi,
I installed the 2.6.1 kernel and having problems with initrd. My GRUB.CONF looks like this-

<<<truncated>>>

title Linux(2.6.1)

	root (hd0,4)
	kernel /boot/vmlinuz-2.6.1 ro root=LABEL=/
	initrd /boot/initrd-2.6.1.img

title RedHat Linux(2.4.20-8)

	root (hd0,4)
	kernel /boot/vmlinuz-2.4.20-8 ro root=LABEL=/
	initrd /boot/initrd-2.4.20-8.img

<<<truncated>>>

2.4.20-8 is the kernel installed by RH 9.0 and works fine. 2.6.1 is what i compiled from source and gives me problem with initrd saying -

"kernel panic: no init found. try passing init= option to kernel"

I understand that there is no problem with the kernel but with the initrd file.

Linux is on /dev/hda5 with EXT3 fs and has NO BOOT partition. In 2.4.20-8 i can see EXT3 loading as a module while booting, but in 2.6 EXT3 loading fails with this -

"mount: error 19 on loading ext3"

_________________________________

When i remove the initrd line from GRUB.CONF i.e. -

<<<truncated>>>

title Linux(2.6.1)

	root (hd0,4)
	kernel /boot/vmlinuz-2.6.1 ro root=LABEL=/

title RedHat Linux(2.4.20-8)

	root (hd0,4)
	kernel /boot/vmlinuz-2.4.20-8 ro root=LABEL=/
	initrd /boot/initrd-2.4.20-8.img

<<<truncated>>>

2.6.1 loads completely without the module support...so i see that /dev/hda5 is mounted as '/' with fs EXT2 and not EXT3.
Now, after 2.6.1 is loaded, i try this- #depmod
which tells me that EXT3 requires JBD. After manually 'insmod jbd.ko' and 'insmod ext3.ko' EXT3 module loads.

So my problem is that during boot EXT3 isnt getting loaded due to JBD and hence kernel cannot load initrd from /boot/initrd-2.6.1.img( which is on EXT3 fs)

This is how i compile-
#mkdir /usr/src/build-2.6.1
#cd /usr/src/linux-2.6.1
#make O=/usr/src/build-2.6.1 menuconfig
#make O=/usr/src/build-2.6.1
#make O=/usr/src/build-2.6.1 modules_install

i even tried -
#mkinitrd /boot/System-2.6.1.map
/boot/initrd-2.6.1.img
but that fails too...

any help...?

__________________________________
Do you Yahoo!?
Yahoo! Finance: Get your refund fast by filing online.
http://taxes.yahoo.com/filing.html

#1 lore raw

Hi Trideepraj

Quoted 9 lines · Trideepraj Roychoudhury

Hi,
I installed the 2.6.1 kernel and having problems with initrd. My GRUB.CONF looks like this-

<<<truncated>>>

title Linux(2.6.1)

	root (hd0,4)
	kernel /boot/vmlinuz-2.6.1 ro root=LABEL=/

Replace ^^^^^^^
this with:
kernel /boot/vmlinuz-2.6.1 ro root=/your/root-dev
ie:

	kernel /boot/vmlinuz-2.6.1 ro root=/dev/hda3

If this does not make sense then send me you /ets/fstab file off line and I will send you the correct fix.

This is a problem I have had with RedHat for a long time.

Darren

Quoted 70 lines
	initrd /boot/initrd-2.6.1.img

title RedHat Linux(2.4.20-8)

	root (hd0,4)
	kernel /boot/vmlinuz-2.4.20-8 ro root=LABEL=/
	initrd /boot/initrd-2.4.20-8.img

<<<truncated>>>

2.4.20-8 is the kernel installed by RH 9.0 and works fine. 2.6.1 is what i compiled from source and gives me problem with initrd saying -

"kernel panic: no init found. try passing init= option to kernel"

I understand that there is no problem with the kernel but with the initrd file.

Linux is on /dev/hda5 with EXT3 fs and has NO BOOT partition. In 2.4.20-8 i can see EXT3 loading as a module while booting, but in 2.6 EXT3 loading fails with this -

"mount: error 19 on loading ext3"

_________________________________

When i remove the initrd line from GRUB.CONF i.e. -

<<<truncated>>>

title Linux(2.6.1)

	root (hd0,4)
	kernel /boot/vmlinuz-2.6.1 ro root=LABEL=/

title RedHat Linux(2.4.20-8)

	root (hd0,4)
	kernel /boot/vmlinuz-2.4.20-8 ro root=LABEL=/
	initrd /boot/initrd-2.4.20-8.img

<<<truncated>>>

2.6.1 loads completely without the module support...so i see that /dev/hda5 is mounted as '/' with fs EXT2 and not EXT3.
Now, after 2.6.1 is loaded, i try this- #depmod
which tells me that EXT3 requires JBD. After manually 'insmod jbd.ko' and 'insmod ext3.ko' EXT3 module loads.

So my problem is that during boot EXT3 isnt getting loaded due to JBD and hence kernel cannot load initrd from /boot/initrd-2.6.1.img( which is on EXT3 fs)

This is how i compile-
#mkdir /usr/src/build-2.6.1
#cd /usr/src/linux-2.6.1
#make O=/usr/src/build-2.6.1 menuconfig
#make O=/usr/src/build-2.6.1
#make O=/usr/src/build-2.6.1 modules_install

i even tried -
#mkinitrd /boot/System-2.6.1.map
/boot/initrd-2.6.1.img
but that fails too...

any help...?

Quoted 9 lines

__________________________________
Do you Yahoo!?
Yahoo! Finance: Get your refund fast by filing online.
http://taxes.yahoo.com/filing.html
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

--------------------------------------------------
Darren Williams <dsw AT gelato.unsw.edu.au>
Gelato@UNSW <www.gelato.unsw.edu.au>
--------------------------------------------------