Volume groups on SAN storage
Hello everybody,
recently (today) I had a problem.
I'm trying to create a HA Cluster for a DCE server. This is difficult work and sometimes very confusing.
My goal is to make it bootable from a SAN.
So far I managed to install GRUB and boot the machine. The rootfs and the rest can be mounted.
I found, then, that the SCSI-devices inside one of my volume groups were the wrong ones.
What is special about that is that the same content on a device can be seen on different SCSI-devices. This is due to some mirroring within the storage sytems. I cannot avoid that.
Now, I have a readonly physical volume inside one of my volume groups. I want to insert the writeable mirror and get rid of the readonly.
AFAICS this is not possible because I cannot force vgscan to insert a specified SCSI-device. Of course the VGDA is marked "part of VG xxx" and cannot be written anymore. So it cannot be imported nor exported or added to a new VG.
Maybe there is an option anywhere how to scan a particular device.
Does anybody know how to trick LVM?
Is there a hexeditor to patch the VGDA backups to use different /dev/sdXX devices? And if so, does that help?
I'm using redhat 8.0 and I'm bound to that version.
TIA
Thomas
Signature · 6 lines
Thomas Meller mailto: [email protected] mailto: [email protected] ---- ...Our continuing mission: To seek out knowledge of C, to explore strange UNIX commands, and to boldly code where no one has had a man page before.
Thomas,
sounds odd that your storage system exposes more than one device to access the same data.
Anyway: the only way to avoid accesses to SCSI devices you don't want to be used by LVM1 is to move their device nodes out of /dev
(eg, mkdir /dev/.SAV; mv /dev/sdc2 to /dev/.SAV) and rerun vgscan afterwards.
FYI: with LVM2, youd can set up device name filters to avoid accesses
to devices.
Regards,
Heinz -- The LVM Guy --
Quoted 27 lines · Thomas Meller
Hello everybody,
recently (today) I had a problem.
I'm trying to create a HA Cluster for a DCE server. This is difficult work and sometimes very confusing.
My goal is to make it bootable from a SAN.
So far I managed to install GRUB and boot the machine. The rootfs and the rest can be mounted.
I found, then, that the SCSI-devices inside one of my volume groups were the wrong ones.What is special about that is that the same content on a device can be seen on different SCSI-devices. This is due to some mirroring within the storage sytems. I cannot avoid that.
Now, I have a readonly physical volume inside one of my volume groups. I want to insert the writeable mirror and get rid of the readonly.
AFAICS this is not possible because I cannot force vgscan to insert a specified SCSI-device. Of course the VGDA is marked "part of VG xxx" and cannot be written anymore. So it cannot be imported nor exported or added to a new VG.Maybe there is an option anywhere how to scan a particular device.
Does anybody know how to trick LVM?
Is there a hexeditor to patch the VGDA backups to use different/dev/sdXXdevices? And if so, does that help?
Quoted 19 lines
I'm using redhat 8.0 and I'm bound to that version.
TIA
Thomas
Signature · 12 lines
Thomas Meller mailto: [email protected] mailto: [email protected] ---- ...Our continuing mission: To seek out knowledge of C, to explore strange UNIX commands, and to boldly code where no one has had a man page before. _______________________________________________ linux-lvm mailing list [email protected] https://www.redhat.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
*** Software bugs are stupid.
Nevertheless it needs not so stupid people to solve them ***
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Heinz Mauelshagen Red Hat, Inc.
Consulting Development Engineer Am Sonnenhang 11
56242 Marienrachdorf Germany
[email protected] +49 2626 141200
FAX 924446
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-