Skip to contentSkip to conversation

e1000 problems in 2.6.x

DISCUSSION Steve Simitzis 1 participant 1 message Feb 14, 2004

lore
Share & tools
lore
#0 lore raw

hello. since upgrading to 2.6 from 2.4.22, my e1000 devices have been angry. i've tried running both 2.6.2 and 2.6.3-rc2, but the results have been the same. when i return to 2.4.22, all of the problems go away.

i'm getting these over and over again:

Feb 11 19:57:55 sg1 kernel: NETDEV WATCHDOG: eth1: transmit timed out
Feb 11 19:57:57 sg1 kernel: e1000: eth1 NIC Link is Up 100 Mbps Full Duplex
Feb 11 19:58:17 sg1 kernel: NETDEV WATCHDOG: eth1: transmit timed out
Feb 11 19:58:18 sg1 kernel: e1000: eth1 NIC Link is Up 100 Mbps Full Duplex

i'm also seeing about 10-20% of my RX packets as errors when running 2.6.x, and 0 errors when running 2.4.22.

another oddity is that even after forcing my interfaces to 100 Mbps full duplex, my switch is reporting half duplex. again, this only happens in 2.6.x. when running 2.4.22, full duplex is properly negotiated between the e1000 and my switch.

i tried turning off TSO, as suggested elsewhere by Scott Feldman, but that had no effect.

i would love to run 2.6, so if there's anything else i can try (or if this is a known problem and about to be fixed), please let me know.

thanks in advance.

:)

Signature · 4 lines
steve simitzis : /sim' - i - jees/
          pala : saturn5 productions
 www.steve.org : 415.282.9979
  hath the daemon spawn no fire?