Skip to contentSkip to conversation

2.6.x libata update

PATCH Jon Smirl 1 participant 1 message Feb 15, 2004

lore
Share & tools
lore

Jon Smirl

author
#0 lore raw

I'm running RAID-1 on ICH5, 82801EB. One SATA and one IDE drive in array. Hyperthread enabled CPU.

Is this right? My ATA drive is on ide0. Because of the RAID my IDE and SATA drives should have about the same number of interrupts. But half of my IDE interrupts are showing up on ide1, on CPU #1. There shouldn't be any interrupts showing up on CPU#1 with hyperthreading.

[root@smirl proc]# cat interrupts
CPU0 CPU1

  0:    2875672          0    IO-APIC-edge  timer
  1:       1917          0    IO-APIC-edge  i8042
  2:          0          0          XT-PIC  cascade
  8:          1          0    IO-APIC-edge  rtc
  9:          0          0   IO-APIC-level  acpi
 12:         50          0    IO-APIC-edge  i8042
 14:      65443          0    IO-APIC-edge  ide0
 15:      59174          1    IO-APIC-edge  ide1
 16:          0          0   IO-APIC-level  uhci_hcd, uhci_hcd
 17:        688          0   IO-APIC-level  Intel ICH5
 18:     163152          0   IO-APIC-level  libata, uhci_hcd, eth0
 19:      54864          0   IO-APIC-level  uhci_hcd
 22:          3          0   IO-APIC-level  ohci1394
 23:          0          0   IO-APIC-level  ehci_hcd
NMI:          0          0
LOC:    2875702    2875706
ERR:          0
MIS:          0

=====
Jon Smirl
[email protected]

__________________________________
Do you Yahoo!?
Yahoo! Finance: Get your refund fast by filing online.
http://taxes.yahoo.com/filing.html