Skip to contentSkip to conversation

inactive PV associated to unknown VG

linux-lvm Randy Rubins 2 participants 2 messages Feb 20, 2004

lore
Share & tools
lore
#0 lore raw

Thanks, Heinz!

I got impatient this morning and executed:
dd if=/dev/zero of=/dev/sdb bs=1 count=1

hoping the result would be that /dev/sdb1 would contain the only valid VG descriptor, and it worked.

Just for confirmation,

1) Does VG always get written at the beginning of PE (first 128 bytes), whether it's the whole disk (/dev/sdb) or a partition (/dev/sdb1)?

2) I was expecting kickstart to clear the disk label, but looking at my ks.cfg I only see
clearpart --all
It probably should have said:
clearpart --all --initlabel
to avoid the situation of having an "old" PV structure info on /dev/sdb... I haven't tried it yet but would that have been the right approach?

3) AJ Lewis's LVM-HOWTO contains a statement:
"The recommended method of partitioning a disk is to create a single partition that covers the whole disk. This avoids any nasty accidents with whole disk drive device nodes and prevents the kernel warning about unknown partition types at boot-up."

Is there a general agreement amongst lvm developers and users that the partition based PE (/dev/sdb1) is preferred over the "partitionless" PE (/dev/sdb) in a "normal" production environment when the intent is to use the entire physical disk as a PE?

Cheers,
Randy

--------------------------------------------------------------------------------

From: Heinz Mauelshagen <mauelshagen redhat com>
To: linux-lvm redhat com
Subject: Re: [linux-lvm] inactive PV associated to unknown VG
Date: Thu Feb 19 10:38:31 2004

--------------------------------------------------------------------------------

Randy,

the PV structure on /dev/sdb hasn't been removed. Overwrite the first 128 bytes of /dev/sdb and rerun vgscan.

Quoted 2 lines · Randy Rubins

I'm having a problem importing a VG after re-installing the server (original OS version RH

7.3,

Quoted 2 lines

new RHEL 3 AS). LVM is picking up the /dev/sdb, as well as the new /dev/sdb1 PV. Any way to tell LVM

to

Quoted 4 lines

ignore /dev/sdb and force it to use /dev/sdb1? BTW, the LVM version used on RH 7.3 was 0.9.1_beta7, the new LVM version - whatever comes with RHEL 3 AS update 1.

1.0.3

Quoted 5 lines

Thanks,
Randy

pvscan -- reading all physical volumes (this may

take

Quoted 8 lines

a while...)
pvscan -- ACTIVE PV "/dev/sda2" of VG "rootvg"
[16.45 GB / 4.69 GB free]
pvscan -- inactive PV "/dev/sdb" is associated to
unknown VG "localvg" (run vgscan)
pvscan -- inactive PV "/dev/sdb1" is associated to unknown VG "localvg" (run vgscan)
pvscan -- total: 3 [45.42 GB] / in use: 3 [45.42 GB]

/

Quoted 11 lines

in no VG: 0 [0]

=====
Randy Rubins (eBay ID: lv_hockey)
mailto://lv_hockey yahoo com

__________________________________
Do you Yahoo!?
Yahoo! Mail SpamGuard - Read only the mail you want.
http://antispam.yahoo.com/tools

Quoted 5 lines

_______________________________________________
linux-lvm mailing list
linux-lvm redhat com
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at

http://tldp.org/HOWTO/LVM-HOWTO/

Signature · 35 lines
Regards,
Heinz    -- The LVM Guy --

*** Software bugs are stupid.
    Nevertheless it needs not so stupid people to
solve them ***

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

Heinz Mauelshagen                                 Red
Hat, Inc.
Consulting Development Engineer                   Am
Sonnenhang 11
                                                 
56242 Marienrachdorf
                                                 
Germany
Mauelshagen RedHat com                            +49
2626 141200
                                                      
FAX 924446
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-





=====
Randy Rubins (eBay ID: lv_hockey)
mailto://[email protected]

__________________________________
Do you Yahoo!?
Yahoo! Mail SpamGuard - Read only the mail you want.
http://antispam.yahoo.com/tools
#1 lore raw
Quoted 5 lines · Randy Rubins

Thanks, Heinz!

I got impatient this morning and executed:
dd if=/dev/zero of=/dev/sdb bs=1 count=1

Quoted 8 lines

hoping the result would be that /dev/sdb1 would contain the only valid VG descriptor, and it worked.

Just for confirmation,

1) Does VG always get written at the beginning of PE (first 128 bytes), whether it's the whole disk (/dev/sdb) or a partition (/dev/sdb1)?

The LVM1 metadata starts at the very beginning of the device used as a PV. If you use the whole disk /dev/sdb (which you did before) it starts at the frist sector of thw disk, with /dev/sdb1 at the first sector of that partition.

Quoted 9 lines

2) I was expecting kickstart to clear the disk label, but looking at my ks.cfg I only see
clearpart --all
It probably should have said:
clearpart --all --initlabel
to avoid the situation of having an "old" PV structure info on /dev/sdb... I haven't tried it yet but would that have been the right approach?

Yes.

Quoted 8 lines

3) AJ Lewis's LVM-HOWTO contains a statement:
"The recommended method of partitioning a disk is to create a single partition that covers the whole disk. This avoids any nasty accidents with whole disk drive device nodes and prevents the kernel warning about unknown partition types at boot-up."

Quoted 5 lines

Is there a general agreement amongst lvm developers and users that the partition based PE (/dev/sdb1) is preferred over the "partitionless" PE (/dev/sdb) in a "normal" production environment when the intent is to use the entire physical disk as a PE?

It is the recommended approach to avoid the mentioned hassle. Using one partition which covers the whole disk does only waste a tiny amount of space vs. the whole disk PV _but_ makes the PV *visible* in the partitioning tools.

Regards,
Heinz -- The LVM Guy --

Quoted 62 lines

Cheers,
Randy

--------------------------------------------------------------------------------

From: Heinz Mauelshagen <mauelshagen redhat com>
To: linux-lvm redhat com
Subject: Re: [linux-lvm] inactive PV associated to unknown VG
Date: Thu Feb 19 10:38:31 2004

--------------------------------------------------------------------------------

Randy,

the PV structure on /dev/sdb hasn't been removed. Overwrite the first 128 bytes of /dev/sdb and rerun vgscan.

Quoted 2 lines · Randy Rubins

I'm having a problem importing a VG after re-installing the server (original OS version RH

7.3,

Quoted 2 lines

new RHEL 3 AS). LVM is picking up the /dev/sdb, as well as the new /dev/sdb1 PV. Any way to tell LVM

to

Quoted 4 lines

ignore /dev/sdb and force it to use /dev/sdb1? BTW, the LVM version used on RH 7.3 was 0.9.1_beta7, the new LVM version - whatever comes with RHEL 3 AS update 1.

1.0.3

Quoted 5 lines

Thanks,
Randy

pvscan -- reading all physical volumes (this may

take

Quoted 8 lines

a while...)
pvscan -- ACTIVE PV "/dev/sda2" of VG "rootvg"
[16.45 GB / 4.69 GB free]
pvscan -- inactive PV "/dev/sdb" is associated to
unknown VG "localvg" (run vgscan)
pvscan -- inactive PV "/dev/sdb1" is associated to unknown VG "localvg" (run vgscan)
pvscan -- total: 3 [45.42 GB] / in use: 3 [45.42 GB]

/

Quoted 11 lines

in no VG: 0 [0]

=====
Randy Rubins (eBay ID: lv_hockey)
mailto://lv_hockey yahoo com

__________________________________
Do you Yahoo!?
Yahoo! Mail SpamGuard - Read only the mail you want.
http://antispam.yahoo.com/tools

Quoted 29 lines
Quoted 5 lines

_______________________________________________
linux-lvm mailing list
linux-lvm redhat com
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at

http://tldp.org/HOWTO/LVM-HOWTO/

Signature · 20 lines
Regards,
Heinz    -- The LVM Guy --

*** Software bugs are stupid.
    Nevertheless it needs not so stupid people to
solve them ***
=====
Randy Rubins (eBay ID: lv_hockey)
mailto://[email protected]

__________________________________
Do you Yahoo!?
Yahoo! Mail SpamGuard - Read only the mail you want.
http://antispam.yahoo.com/tools

_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/

*** Software bugs are stupid.
Nevertheless it needs not so stupid people to solve them ***

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

Heinz Mauelshagen Red Hat GmbH
Consulting Development Engineer Am Sonnenhang 11
56242 Marienrachdorf Germany
[email protected] +49 2626 141200

                                                       FAX 924446

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-