Incorrect SCx200 dependency
PATCH 1/1 Incorrect SCx200 dependency
Hi Marcelo,
It looks like there is a dependency problem for CONFIG_SCx200_I2C in Linux 2.4.25. It should depend on CONFIG_SCx200_GPIO, not just on CONFIG_SCx200. One of my previous patches was supposed to fix that already, but it looks like I forgot about it then.
Patch follows, please apply.
Thanks
drivers/i2c/Config.in renamed from drivers/i2c/Config.in.orig +1 -1
@@ -12,7 +12,7 @@ dep_tristate ' Philips style parallel port adapter' CONFIG_I2C_PHILIPSPAR $CONFIG_I2C_ALGOBIT $CONFIG_PARPORT dep_tristate ' ELV adapter' CONFIG_I2C_ELV $CONFIG_I2C_ALGOBIT dep_tristate ' Velleman K8000 adapter' CONFIG_I2C_VELLEMAN $CONFIG_I2C_ALGOBIT - dep_tristate ' NatSemi SCx200 I2C using GPIO pins' CONFIG_SCx200_I2C $CONFIG_SCx200 $CONFIG_I2C_ALGOBIT + dep_tristate ' NatSemi SCx200 I2C using GPIO pins' CONFIG_SCx200_I2C $CONFIG_SCx200_GPIO $CONFIG_I2C_ALGOBIT if [ "$CONFIG_SCx200_I2C" != "n" ]; then int ' GPIO pin used for SCL' CONFIG_SCx200_I2C_SCL 12 int ' GPIO pin used for SDA' CONFIG_SCx200_I2C_SDA 13
Signature · 2 lines
Jean Delvare http://www.ensicaen.ismra.fr/~delvare/