2.6.3-rc2 fails to boot with "Illegal Instruction" on sparc64
[ Please Cc me as I'm not subscribed to the list ]
Hi,
Linux 2.6.3-rc2 fails to boot on sparc64. 2.6.2 doesn't boot neither.
The output is :
Allocated 8 Megs of memory at 0x4000000 for kernel
Loaded kernel version 2.6.3 <--- SILO message
Illegal Instruction
{0} ok
2.6.1 boots without any problem.
silo v. 1.4.4
We used gcc 3.3 to compile the kernel. Same issue with gcc 3.2. 2.6.1 compiled with exactly the same build environment does boot.
The box is a Sun Entreprise 4000./proc/cpuinfo:
cpu : TI UltraSparc I (SpitFire)
fpu : UltraSparc I integrated FPU
promlib : Version 3 Revision 2
prom : 3.2.4
type : sun4u
ncpus probed : 4
ncpus active : 4
Cpu0Bogo : 333.41
Cpu0ClkTck : 0000000009f437c0
Cpu1Bogo : 333.41
Cpu1ClkTck : 0000000009f437c0
Cpu4Bogo : 333.41
Cpu4ClkTck : 0000000009f437c0
Cpu5Bogo : 333.41
Cpu5ClkTck : 0000000009f437c0
MMU Type : Spitfire
State:
CPU0: online CPU1: online CPU4: online CPU5: online
Any clues ?
Any other useful information I could provide ?
Signature · 3 lines
Lucas Nussbaum Club GNU/Linux ENSIMAG - Departement Telecommunications
Linux 2.6.3 still doesn't boot on UltraSparc I
Hi,
As we reported in [1], Linux 2.6.(2|3) doesnt boot on sparc64. We traced the problem back to some changes in arch/sparc64/kernel/head.S (2.6.3 does boot with 2.6.1's head.S).
[1] http://marc.theaimsgroup.com/?l=linux-kernel&m=107643106916202&w=2
output :
Allocated 8 Megs of memory at 0x4000000 for kernel
Loaded kernel version 2.6.3 <--- SILO message
Illegal Instruction
{0} ok
After a discussion with Ben Collins, it seems that only UltraSparc I are affected. Could somebody check the new head.S's assembly code ? We are a bit short here on sparc64 ASM...
Please tell us how we can help.
Thank you,
Signature · 3 lines
Lucas Nussbaum Club GNU/Linux ENSIMAG - Departement Telecommunications
Re: Linux 2.6.3 still doesn't boot on UltraSparc I
Quoted 14 lines · Lucas Nussbaum
Hi,
As we reported in [1], Linux 2.6.(2|3) doesnt boot on sparc64. We traced the problem back to some changes in
arch/sparc64/kernel/head.S(2.6.3 does boot with 2.6.1'shead.S).[1] http://marc.theaimsgroup.com/?l=linux-kernel&m=107643106916202&w=2
output :
Allocated 8 Megs of memory at0x4000000for kernel
Loaded kernel version 2.6.3 <--- SILO message
Illegal Instruction
{0} ok
Quoted 3 lines
After a discussion with Ben Collins, it seems that only UltraSparc I are affected. Could somebody check the new head.S's assembly code ? We are a bit short here on sparc64 ASM...
So backing down to silo < 1.4.0 works with the new head.S on UltraSPARC I? I don't think the problem itself is in head.S. Changing that would force silo 1.4.x to not keep the kernel in high memory (would copy it back down to 0x4000 where the old silo would have put it). I am guessing the problem is elsewhere.
Try this, keep the new head.S and newer SILO, and edit head.S so that "HdrS version" is 0x202 instead of 0x300. See if that boots for you (would confirm my suspicion).
Signature · 4 lines
Debian - http://www.debian.org/ Linux 1394 - http://www.linux1394.org/ Subversion - http://subversion.tigris.org/ WatchGuard - http://www.watchguard.com/
Re: Linux 2.6.3 still doesn't boot on UltraSparc I
Quoted 9 lines · Ben Collins
So backing down to silo < 1.4.0 works with the new
head.Son UltraSPARC I? I don't think the problem itself is inhead.S. Changing that would force silo 1.4.x to not keep the kernel in high memory (would copy it back down to0x4000where the old silo would have put it). I am guessing the problem is elsewhere.Try this, keep the new
head.Sand newer SILO, and edithead.Sso that "HdrS version" is0x202instead of0x300. See if that boots for you (would confirm my suspicion).
It boots correctly this way. What can we do to help now ?
Lucas
Re: Linux 2.6.3 still doesn't boot on UltraSparc I
Quoted 7 lines · Lucas Nussbaum
Quoted 6 lines · Ben Collins
So backing down to silo < 1.4.0 works with the new
head.Son UltraSPARC I? I don't think the problem itself is inhead.S. Changing that would force silo 1.4.x to not keep the kernel in high memory (would copy it back down to0x4000where the old silo would have put it). I am guessing the problem is elsewhere.
Quoted 5 lines
Quoted 3 lines
Try this, keep the new
head.Sand newer SILO, and edithead.Sso that "HdrS version" is0x202instead of0x300. See if that boots for you (would confirm my suspicion).It boots correctly this way. What can we do to help now ?
Can you enable CONFIG_DEBUG_BOOTMEM and boot with "linux -p"?
Signature · 4 lines
Debian - http://www.debian.org/ Linux 1394 - http://www.linux1394.org/ Subversion - http://subversion.tigris.org/ WatchGuard - http://www.watchguard.com/
Re: Linux 2.6.3 still doesn't boot on UltraSparc I
Quoted 8 lines · Ben Collins
Quoted 7 lines · Lucas Nussbaum
Quoted 6 lines · Ben Collins
So backing down to silo < 1.4.0 works with the new
head.Son UltraSPARC I? I don't think the problem itself is inhead.S. Changing that would force silo 1.4.x to not keep the kernel in high memory (would copy it back down to0x4000where the old silo would have put it). I am guessing the problem is elsewhere.
Quoted 7 lines
Quoted 5 lines
Quoted 3 lines
Try this, keep the new
head.Sand newer SILO, and edithead.Sso that "HdrS version" is0x202instead of0x300. See if that boots for you (would confirm my suspicion).It boots correctly this way. What can we do to help now ?
Can you enable
CONFIG_DEBUG_BOOTMEMand boot with "linux -p"?
Here is the output :
boot: linux -p
Allocated 8 Megs of memory at 0x4000000 for kernel Kernel doesn't support loading to high memory, relocating done. Loaded kernel version 2.6.3
PROMLIB: Sun IEEE Boot Prom 3.2.4 1996/05/30 11:17
Linux version 2.6.3 (root@ensilinx8) (gcc version 3.3.3 20040125 (prerelease) (Debian)) #4 SMP [...]
ARCH: SUN4U
PROMLIB: Sun IEEE Boot Prom 3.2.4 1996/05/30 11:17
PROMLIB: Sun IEEE Boot Prom 3.2.4 1996/05/30 11:17
PROMLIB: Sun IEEE Boot Prom 3.2.4 1996/05/30 11:17
PROMLIB: Sun IEEE Boot Prom 3.2.4 1996/05/30 11:17
[...]
Looping, had to stop it using Break+A.
The same kernel boots without -p.
Lucas