Mobile Intel Celeron 2.0 GHz with ICH4 bridge
Hi
I have an Acer Travelmate 233 and I am trying to save some battery power. Is that possible with cpufreq?
The CPU is a Mobile Intel Celeron 2.0 GHz and the southbridge is an Intel 82801DB 845G/GL Chipset ISA Bridge (ICH4)
I run Mandrake 10.0 RC1 with kernel 2.6.2 and cpufreq 1.0.1, unfortunately I get the following message:
cpufreq: Intel(R) SpeedStep(TM) for this chipset not (yet) available. Is this because I am running an outdated version of cpufreq, or just because the CPU is not recognized properly?
Are there other ways to save power with this machine, on the CPU?
Best regards
Keld
Quoted 5 lines · Keld Jørn Simonsen
Hi
I have an Acer Travelmate 233 and I am trying to save some battery power. Is that possible with cpufreq?
Quoted 8 lines
The CPU is a Mobile Intel Celeron 2.0 GHz and the southbridge is an Intel 82801DB 845G/GL Chipset ISA Bridge (ICH4)
I run Mandrake 10.0 RC1 with kernel 2.6.2 and cpufreq 1.0.1, unfortunately I get the following message:
cpufreq: Intel(R) SpeedStep(TM) for this chipset not (yet) available. Is this because I am running an outdated version of cpufreq, or just because the CPU is not recognized properly?
The problem is that you have a Mobile Celeron which does not support SpeedStep. All you could get from cpufreq is Clock Throttling, (p4-clockmod), but this won't save you much in terms of battery power.
Quoted 1 line
Are there other ways to save power with this machine, on the CPU?
ACPI processor support with working C1 and C2 idle states [check /proc/acpi/processor/*/power ]
Dominik
_______________________________________________
Cpufreq mailing list
[email protected]
http://www.linux.org.uk/mailman/listinfo/cpufreq
Quoted 15 lines · Dominik Brodowski
Quoted 5 lines · Keld Jørn Simonsen
Hi
I have an Acer Travelmate 233 and I am trying to save some battery power. Is that possible with cpufreq?
Quoted 8 lines
The CPU is a Mobile Intel Celeron 2.0 GHz and the southbridge is an Intel 82801DB 845G/GL Chipset ISA Bridge (ICH4)
I run Mandrake 10.0 RC1 with kernel 2.6.2 and cpufreq 1.0.1, unfortunately I get the following message:
cpufreq: Intel(R) SpeedStep(TM) for this chipset not (yet) available. Is this because I am running an outdated version of cpufreq, or just because the CPU is not recognized properly?
Quoted 3 lines
The problem is that you have a Mobile Celeron which does not support SpeedStep. All you could get from cpufreq is Clock Throttling, (p4-clockmod), but this won't save you much in terms of battery power.
OK, understood.
Quoted 3 lines
Quoted 1 line
Are there other ways to save power with this machine, on the CPU?
ACPI processor support with working C1 and C2 idle states [check
/proc/acpi/processor/*/power]
As I can see it, my system already goes in autohalt. The normal system power drainage is about 38 W, but I can measure the power use to about 18 W when I do nothing, (with my harddisk in sleep, and my screen turned to lowest intensity).
I understand that throttling is actually putting the CPU off power. I would like to be able to shut off just the CPU, getting a savings of about 7,5 W. Is this possible, is there a way to shut off the CPU while having the screen and ram on power? What commands should I issue, or is this something I need to make a program to do?
The idea is to shut off the CPU after it being idle for about a second, and resuming the operation next time I touch the keyboard or the mouse. 1 second would allow normal typing or normal mouse movement to perform as usual, while having the screen lit would give the impression of the machine being on. Going from 18 W to about 11 W would give me about 2 hours more of battery time.
best regards
keld