Remove asb100 support from w83781d
PATCH 1/1 Remove asb100 support from w83781d
Hi Greg,
Now that we have a separate asb100 driver, we can remove the (bad) support of it from the w83781d driver. Following patch does this. I've already cleaned this up in our CVS repository.
Please apply,
Thanks.
drivers/i2c/chips/w83781d.c renamed from drivers/i2c/chips/w83781d.c.orig +4 -7
@@ -25,8 +25,7 @@ Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA as99127f 7 3 1? 3 0x31 0x12c3 yes no - as99127f rev.2 (type_name = 1299127f) 0x31 0x5ca3 yes no - asb100 "bach" (type_name = as99127f) 0x31 0x0694 yes no + as99127f rev.2 (type_name = as99127f) 0x31 0x5ca3 yes no w83781d 7 3 0 3 0x10-1 0x5ca3 yes yes w83627hf 9 3 2 3 0x21 0x5ca3 yes yes(LPC) w83627thf 9 3 2 3 0x90 0x5ca3 no yes(LPC)
@@ -1194,10 +1193,8 @@ val2 =w83781d_read_value (new_client,W83781D_REG_CHIPMAN );/* Check for Winbond or Asus ID if in bank 0 */ if ((!(val1 &0x07 )) && - (((!(val1 &0x80 )) && (val2 !=0xa3 ) && (val2 !=0xc3 ) - && (val2 !=0x94 )) - || ((val1 &0x80 ) && (val2 !=0x5c ) && (val2 !=0x12 ) - && (val2 !=0x06 )))) { + (((!(val1 &0x80 )) && (val2 !=0xa3 ) && (val2 !=0xc3 )) + || ((val1 &0x80 ) && (val2 !=0x5c ) && (val2 !=0x12 )))) { err = -ENODEV ; goto ERROR2; }
@@ -1226,7 +1223,7 @@ val2 =w83781d_read_value (new_client,W83781D_REG_CHIPMAN );if (val2 =0x5c ) vendid = winbond; -else if ((val2 =0x12 ) || (val2 =0x06 )) +else if (val2 =0x12 ) vendid = asus;else { err = -ENODEV ;
Signature · 2 lines
Jean Delvare http://www.ensicaen.ismra.fr/~delvare/
Greg KH
AppliedPATCH 1/1 Remove asb100 support from w83781d
Quoted 7 lines · Jean Delvare
Hi Greg,
Now that we have a separate asb100 driver, we can remove the (bad) support of it from the w83781d driver. Following patch does this. I've already cleaned this up in our CVS repository.
Please apply,
Applied, thanks.
greg k-h