Skip to contentSkip to conversation

Can we limit number of messages per day.

U-Boot-Users Abbas Dadabhoy 3 participants 3 messages Feb 24, 2004 – Feb 25, 2004 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

Wont it be nice to limit these number of messages to 1 or 2 a day.

Quoted 635 lines · u-boot-users-request at lists.sourceforge.net

Send U-Boot-Users mailing list submissions to
u-boot-users at lists.sourceforge.net

To subscribe or unsubscribe via the World Wide Web, visit
https://lists.sourceforge.net/lists/listinfo/u-boot-users
or, via email, send a message with subject or body 'help' to
u-boot-users-request at lists.sourceforge.net

You can reach the person managing the list at
u-boot-users-admin at lists.sourceforge.net

When replying, please edit your Subject line so it is more specific than "Re: Contents of U-Boot-Users digest..."

Today's Topics:

1. RE: Problems with u-boot, PPChameleonEVB and MontaVista kernel (Andy Hawkins)
2. Re: Where can I find a libgcc.a with software FP. (Wolfgang Denk)
3. Re: telnet server on u-boot (Detlev Zundel)
4. Re: Compile Error (Wolfgang Denk)
5. Re: NFS support patch (Detlev Zundel)
6. RE: Problems with u-boot, PPChameleonEVB and MontaVista kernel (Andy Hawkins)
7. Re: NFS support patch (Steven Scholz)
8. Memory Access Problem (sudhakar rajashekhara)
9. Re: telnet server on u-boot (Wolfgang Denk)
10. Re: NFS support patch (Steven Scholz)
11. Re: telnet server on u-boot (Laurent Mohin)
12. Re: Where can I find a libgcc.a with software FP. (Marius Groeger)

--__--__--

Message: 1
From: "Andy Hawkins" <[email protected]>
To: <[email protected]>
Subject: RE: [U-Boot-Users] Problems with u-boot, PPChameleonEVB and MontaVista kernel
Date: Tue, 24 Feb 2004 15:45:44 -0000

Quoted 1 line

Is there any special reason to use their kernel? What does it

contain

Quoted 1 line

that you cannot find in DAVE's / our tested and working kernel tree?

Well, we've decided to use the MontaVista distribution / development environment, and that integrates nicely with their kernel build tools. There may well be features that are present in the MontaVista kernel tree that we would like to use too (although I'd have to check the details). I think the general feeling is that having one source for all this is the best way to go (if we can get it to work).

Quoted 1 line

You have to accept the fact that "similar" is not good enough.

You

Quoted 1 line

must use a kernel which has been proted to the _exact_

matching

Quoted 1 line

board, or you will run into problems sooner or later - at least

if

Quoted 1 line

you don't understand EXACTLY what you are doing (which seems not

to

Quoted 1 line

be the case - no offence meant).

You're absolutely right, I don't understand exactly what I'm doing :). No offence taken whatsoever. I've read through most of 'Understanding the Linux Kernel', but unfortunately it only covers the early kernel boot process for the i386 architecture. Is there any other reference that can give more information for the PowerPC?

Quoted 1 line

Of course. You shall break compatibility to the rest of the

world

Quoted 12 lines

just to make their kernel work. What a nonsense.

Quoted 1 line

I do have access to a BDI2000, that I've used to break into

a running

Quoted 5 lines

kernel (at start_here), but can't get it to break when I use the MontaVista kernel. From this, I assume that it's failing somewhere very early in the linux boot process.

Can anyone offer any advice?

Your question is a FAQ:

http://www.denx.de/twiki/bin/view/DULG/LinuxHangsAfterUncompressingKer
nel

I've followed the information in that FAQ. However, all it tells me to do is match up the bd_info structures, and check clock information.

Quoted 1 line

What I cannot understand is why you are wasting your time (and

ours) if you

Quoted 1 line

have a working kernel which you can use.

It just seems to make sense to try to keep everything (kernel, apps, development etc.) under 'one roof' (i.e. MontaVista) if at all possible.

I think whichever kernel tree we use, we're going to have to do some porting either way, so I'd appreciate some guidance as to where in the kernel I should be looking to resolve the problems we currently have (as I might need the knowledge gained when we come to adding further customisations later).

We *do* have a BDI 2000, but I think my ability to be able to debug this problem is hindered by my limited knowledge of the kernel startup code.

Any pointers on how to improve that knowledge (URLs, book and the like), with specific reference to the PowerPC processor, would be much appreciated.

Thanks to all who have replied thus far.

Andy

--__--__--

Message: 2
To: u-boot-users at lists.sourceforge.net
Cc: Bernieshu <[email protected]>
Subject: Re: [U-Boot-Users] Where can I find a libgcc.a with software FP.
From: Wolfgang Denk <[email protected]>
Date: Tue, 24 Feb 2004 16:58:14 +0100

Quoted 6 lines · In message <[email protected]> Marius Groeger…

This is a problem with the gcc/binutils toochain, which doesn't handle -msoft-float the way we want it. The error you're seeing isn't really one, since neither the U-Boot code nor the quoted functions in libgcc.a actually use FP instructions. It's only the ELF binary tags that don't match.

I'm not sure. I don't know for certain for ARM, but on other archi- tectures GCC will happily generate FP instructions for example to perform fast memory copy operations (like when assigning structures of the "right" size).

Best regards,

Wolfgang Denk

--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de In 1750 Issac Newton became discouraged when he fell up a flight of stairs.

--__--__--

Message: 3
To: "Laurent Mohin" <[email protected]>
Cc: u-boot-users at lists.sourceforge.net
Subject: Re: [U-Boot-Users] telnet server on u-boot
From: Detlev Zundel <[email protected]>
Date: 24 Feb 2004 17:05:32 +0100

Hello Laurent,

Quoted 10 lines

For some remote instruments, I need to be able to have a telnet access to the boot in case of my Linux kernel and file system are down (after an upgrade for example).
I don't think that u-boot provide telnet support and I had a look at another boot project called redboot that provide such a functionality. I have a couple of questions :
Does anybody see another solution than telnet to control a remote instrument?
Has anybody already tried to add telnet server to u-boot? It seems to be a challenging task because we need to add TCP support.

U-Boot does not contain any TCP implementation. I doubt that this will be doable with reasonable effort. Writing a standard conform TCP implementation is a daunting task that even many proprietary systems could not solve, i.e. there are many TCP implementations working well in "the lab" _only_.

What I had in mind is a "UDP console" as it was implemented some time ago for the Linux kernel also (there was a patch floating around). Googling for it I found at least this link [1]. This would of course need a "special" program to access the console but it is a much more realistic target to aim at.

Quoted 2 lines

Has anybody used both u-boot and redboot and can point me the main advantages and drawbacks of both?

Sorry, I can't help you there.

Cheers
Detlev

[1] http://www.linux.it/kerneldocs/sercons/sercons.html

--
Directories are added, deleted, and rearranged much as you would expect, even if you don't know it's what you'd expect.
-- Tom Lord in TLA Documentation

--__--__--

Message: 4
To: Jim Xu <[email protected]>
Cc: "'u-boot-users at lists.sourceforge.net'" <[email protected]>
Subject: Re: [U-Boot-Users] Compile Error
From: Wolfgang Denk <[email protected]>
Date: Tue, 24 Feb 2004 17:11:30 +0100

Dear Jim,

Quoted 2 lines · in message <75490FAA49820647AB2BAFEFE08BFABC0CD98D@dalnt225.dal.flextronics.com…

I downloaded and installed the ELDK. My board is Motorola FADS860T. I did:

...

Quoted 2 lines

{standard input}:19: Error: Relocation cannot be done when using -mrelocatable

Seems you are using the new (3.0) ELDK which is based on GCC-3.x with an old version of U-boot.

Quoted 1 line

Do I miss something in the build process?

Your U-Boot sources are too old for this compiler. GCC-3.x requires a few adaptions which were added in later versions of U-Boot. See for example the source tree (1.0.2) which is included with the ELDK.

Quoted 6 lines

------_=_NextPart_001_01C3FAEC.4DA52400

Content-Type: text/html;
      charset="iso-8859-1"

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD>

And PLEASE do NOT post HTML!!

Best regards,

Wolfgang Denk

--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de The most exciting phrase to hear in science, the one that heralds new discoveries, is not "Eureka!" (I found it!) but "That's funny ..."
-- Isaac Asimov

--__--__--

Message: 5
To: Masami Komiya <[email protected]>
Cc: Steven Scholz <[email protected]>, Wolfgang Denk
<[email protected]>,
U-BOOT-USERS <[email protected]>
Subject: Re: [U-Boot-Users] NFS support patch
From: Detlev Zundel <[email protected]>
Date: 24 Feb 2004 17:13:17 +0100

Hi Masami & Steven,

Quoted 17 lines

I have no objection.

Masami Komiya

Quoted 12 lines · Steven Scholz

Hi

Quoted 8 lines
Quoted 3 lines

I uploaded NFS support patch to my web site.

http://www.sonare.it/u-boot/u-boot-nfs.patch.gz

Well done, thanks a lot!

Checked in.

I think CFG_CMD_NFS should be considered "non-standard". It does not even compile for AT91RM9200.

As long as the NFS support does not compile on all platforms it should probably be non-standard - _iff_ it compiles on all platforms I would certainly reconsider this as the code impact is minimal but the feature will be very helpful (IMHO).

But until then, Steven can you share the compile problems with us so we can fix them? There should really be no general reason why this should not work on ARM, or am I missing something?

Thanks!
Detlev

--
Directories are added, deleted, and rearranged much as you would expect, even if you don't know it's what you'd expect.
-- Tom Lord in TLA Documentation

--__--__--

Message: 6
From: "Andy Hawkins" <[email protected]>
To: <[email protected]>
Subject: RE: [U-Boot-Users] Problems with u-boot, PPChameleonEVB and MontaVista kernel
Date: Tue, 24 Feb 2004 16:16:09 -0000

Quoted 1 line

Then you will either have to move all the modifications needed

for

Quoted 1 line

the PPCHameleon board into their kernel tree (thus creating

something

Quoted 1 line

which again is not the original MV kernel), or have MV provide

a

Quoted 1 line

kernel extended in such way.

That's what I'm expecting to have to do, but unfortunately know where to look for the changes I need to make is difficult.

Quoted 1 line

Yes, and this is your most pressing problem. When the

parameters

Quoted 1 line

passed to the Linux kernel are correct you will at least get

some

Quoted 1 line

boot messages, and see where the kernel crashes then (which it

will

Quoted 1 line

do).

Well, I think I *have* matched up the two structures, but we're still not seeing anything. Where can I put breakpoints in the kernel to try to work out why we're not getting any boot messages?

Quoted 1 line

I think you can use another kernel tree (like that from our

CVS

Quoted 1 line

server) without problems. If you feel you must move our patches

into

Quoted 1 line

the MV tree please feel free to do so - all the history and

comments

Quoted 1 line

are available for free on our CVS server. You can extract the

patches

Quoted 1 line

that are relevant for the PPChameleon board and try applying them

to

Quoted 1 line

the MV tree - I don't expect any serious problems there.

At the risk of asking newbie questions, how would I go about doing this?

Thanks again for all the help so far, it's much appreciated.

Andy

--__--__--

Message: 7
Date: Tue, 24 Feb 2004 17:17:27 +0100
From: Steven Scholz <[email protected]>
CC: U-BOOT-USERS <[email protected]>
Subject: Re: [U-Boot-Users] NFS support patch

Hi Detlev,

Quoted 11 lines
Quoted 2 lines
Quoted 2 lines

I think CFG_CMD_NFS should be considered "non-standard". It does not even compile for AT91RM9200.

=20
As long as the NFS support does not compile on all platforms it should probably be non-standard - _iff_ it compiles on all platforms I would certainly reconsider this as the code impact is minimal but the feature will be very helpful (IMHO).
=20
But until then, Steven can you share the compile problems with us so we can fix them? There should really be no general reason why this should not work on ARM, or am I missing something?

No big deal.
There's no get_ticks() yet for AT91RM9200. I fixed that and I am about=20 to test it and to provide a patch real soon now.

--=20
Steven Scholz

imc Measurement & Control               imc Me=DFsysteme GmbH
Voltastr. 5                             Voltastr. 5
13355 Berlin                            13355 Berlin
Germany                                 Deutschland

--__--__--

Message: 8
Date: Tue, 24 Feb 2004 08:26:52 -0800 (PST)
From: sudhakar rajashekhara <[email protected]>
To: u-boot-users at lists.sourceforge.net
Subject: [U-Boot-Users] Memory Access Problem

Hi,

We have ported U-boot and Linux to a custom 8280 board. For this board, the LED base has been set at 0x2200A000. I am able to write to this base from U-boot using mw command and control the LED display. But if I try to access the same memory from Linux, the kernel is raising an exception. I even tried to map this memory area by calling ioremap in MMU_init but the result was same. Do I have to do any other configuration in the Linx kernel to access this memory area? Following is the log:

regards,
Sudhakar.

=======================================================

Oops: kernel access of bad area, sig: 11

NIP: C0139034 XER: 00000000 LR: C0139024 SP: C05B9F90
REGS: c05b9ee0 TRAP: 0300
Not tainted

MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11

DAR: 2200A000, DSISR: 22000000

TASK = c05b8000[1] 'swapper' Last syscall: -1

last math 00000000 last altivec 00000000

GPR00: FFFFFFFF C05B9F90 C05B8000 C0110000 00001032 00000001 00000001 00000000

GPR08: F0000088 2200A000 C012D417 C05B9EA0 C0170000 00000000 10000000 00000000
GPR24: 00000000 00000000 40000000 007FFF7E 007FFF00 00000000 C0170000 007FFEB0
Call backtrace:
=======================================================

__________________________________
Do you Yahoo!?
Yahoo! Mail SpamGuard - Read only the mail you want.
http://antispam.yahoo.com/tools

--__--__--

Message: 9
To: u-boot-users at lists.sourceforge.net
Subject: Re: [U-Boot-Users] telnet server on u-boot
From: Wolfgang Denk <[email protected]>
Date: Tue, 24 Feb 2004 17:26:35 +0100

Quoted 9 lines · In message <[email protected]> Detlev Zundel wrote:
Quoted 9 lines

For some remote instruments, I need to be able to have a telnet access to the boot in case of my Linux kernel and file system are down (after an upgrade for example).
I don't think that u-boot provide telnet support and I had a look at another boot project called redboot that provide such a functionality. I have a couple of questions :
Does anybody see another solution than telnet to control a remote instrument?

There are many solutions. You don't provide much informatiuon about your workign environment so it is difficult to make a good recommen- dation. Standard solutions include: use a modem to attach to the serial console; use a terminal server to attach to the serial console; etc.

Quoted 5 lines

What I had in mind is a "UDP console" as it was implemented some time ago for the Linux kernel also (there was a patch floating around). Googling for it I found at least this link [1]. This would of course need a "special" program to access the console but it is a much more realistic target to aim at.

This has been discussed before indeed for U-Boot, too. Interest for such a feature seems to pretty limited, though.

Best regards,

Wolfgang Denk

--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de An expert is a person who avoids the small errors while sweeping on to the grand fallacy.

--__--__--

Message: 10
Date: Tue, 24 Feb 2004 17:37:09 +0100
From: Steven Scholz <[email protected]>
To: Masami Komiya <[email protected]>
CC: U-BOOT-USERS <[email protected]>
Subject: Re: [U-Boot-Users] NFS support patch

Quoted 11 lines · Masami Komiya

I uploaded NFS support patch to my web site.

http://www.sonare.it/u-boot/u-boot-nfs.patch.gz

If you are interested in, please evaluate.

The most part of this is taken from etherboot.

To use NFS support, add the definition CFG_CMD_NFS to CONFIG_COMMANDS defined in the configration file of your board.

I tried it but it does not work on my ARM (AT91RM9200) board:

multiIO> nfs 0x20500000 10.0.2.9:/opt/eldk/arm_920TDI/uImage File transfer via NFS from server 10.0.2.9; our IP address is 10.0.9.155 Filename '/opt/eldk/arm_920TDI/uImage'.
Load address: 0x20500000
Loading: #################################################################

         #############################################

done
Bytes transferred = 560892 (88efc hex)

Fair enough so far. The length is correct. But apparently I did not get the correct data:

multiIO> md.w 0x20500000

20500000: 0500 4c89 3b40 5f7c 0000 0000 3b40 b77a    ...L@;|_....@;z.
20500010: 0000 0000 3b40 b77a 0000 0000 ffff ffff    ....@;z.........
20500020: ffff ffff ffff ffff ffff ffff ffff ffff    ................
20500030: ffff ffff ffff ffff ffff ffff ffff ffff    ................
20500040: ffff ffff ffff ffff ffff ffff ffff ffff    ................
20500050: ffff ffff ffff ffff ffff ffff ffff ffff    ................
20500060: ffff ffff ffff ffff ffff ffff ffff ffff    ................
20500070: ffff ffff ffff ffff ffff ffff ffff ffff    ................

But it should look like this:

scholz at Pinguin:/opt/eldk/arm_920TDI> hexdump uImage | head 0000000 0527 5619 1fb4 eeca 1640 146c 0800 bc8e 0000010 0020 0080 0020 0080 455f 8430 0205 0102 0000020 0000 0000 0000 0000 0000 0000 0000 0000
*
0000040 8b1f 0808 6c13 4016 0302 696c 756e 2e78 0000050 6962 006e bdec 7c0d 555c 3f99 ee7e a4bc 0000060 6493 dc9a 1264 6d08 b7a0 806d 0180 da6e 0000070 a100 74a6 8b4a 5b54 da65 a806 3558 d140

What's the problem?

--
Steven Scholz

imc Measurement & Control               imc Me?systeme GmbH
Voltastr. 5                             Voltastr. 5
13355 Berlin                            13355 Berlin
Germany                                 Deutschland

--__--__--

Message: 11
To: Wolfgang Denk <[email protected]>
Cc: u-boot-users at lists.sourceforge.net
Subject: Re: [U-Boot-Users] telnet server on u-boot
From: "Laurent Mohin" <[email protected]>
Date: Tue, 24 Feb 2004 17:41:58 +0100

Wolfgang,

Quoted 1 line · you
Quoted 1 line

For some remote instruments, I need to be able to have a telnet access

to

Quoted 9 lines
Quoted 8 lines

the boot in case of my Linux kernel and file system are down (after an

upgrade for example).
I don't think that u-boot provide telnet support and I had a look at another boot project called redboot that provide such a functionality. I have a couple of questions :
Does anybody see another solution than telnet to control a remote instrument?

Quoted 5 lines

There are many solutions. You don't provide much informatiuon about your workign environment so it is difficult to make a good recommen- dation. Standard solutions include: use a modem to attach to the serial console; use a terminal server to attach to the serial console; etc.

Use of a modem or a terminal server to attach to the serial console is not a good solution for me, because I hope to deploy at least several hundred of instruments. And the only link I have with them is thru Ethernet. That's why I'm looking for something similar as telnet.

Thanks for your reply,

Laurent

--__--__--

Message: 12
Date: Tue, 24 Feb 2004 17:53:39 +0100 (CET)
From: Marius Groeger <[email protected]>
To: Wolfgang Denk <[email protected]>
cc: u-boot-users at lists.sourceforge.net,
Bernieshu <[email protected]>
Subject: Re: [U-Boot-Users] Where can I find a libgcc.a with software FP.

Quoted 8 lines · Wolfgang Denk
Quoted 6 lines · In message <[email protected]> Marius Groeger…

This is a problem with the gcc/binutils toochain, which doesn't handle -msoft-float the way we want it. The error you're seeing isn't really one, since neither the U-Boot code nor the quoted functions in libgcc.a actually use FP instructions. It's only the ELF binary tags that don't match.

Quoted 4 lines

I'm not sure. I don't know for certain for ARM, but on other archi- tectures GCC will happily generate FP instructions for example to perform fast memory copy operations (like when assigning structures of the "right" size).

I'm having similar doubts, as I wrote in my previous post. Please read it again (to the end.)

In practice, however, I have not seen this kind of optimising as of yet. Maybe on ARM there is no gain in performance. Unless there is a proper (read: for all ARM architectures, and working like we know it from powerpc-linux) -msoft-float patch for GCC 3, I'm inclined to just (carefully) drop -msoft-float from *boot.

I'm curious about Robert Schwebel's assessment of this issue, since I know he's been workin on this.

Regards,
Marius

--
Marius Groeger <[email protected]>
Project Manager

SYSGO Real-Time Solutions AG | Embedded and Real-Time Software Am Pfaffenstein 14
55270 Klein-Winternheim, Germany

Voice: +49-6136-9948-0 | FAX: +49-6136-9948-10
www.sysgo.com | www.elinos.com | www.osek.de

--__--__--

_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users

End of U-Boot-Users Digest

#2 lore raw
Quoted 1 line · In message <[email protected]> you wrote:

Wont it be nice to limit these number of messages to 1 or 2 a day.

...

Quoted 14 lines
Quoted 14 lines

Today's Topics:

1. RE: Problems with u-boot, PPChameleonEVB and MontaVista kernel (Andy Hawkins)
2. Re: Where can I find a libgcc.a with software FP. (Wolfgang Denk)
3. Re: telnet server on u-boot (Detlev Zundel)
4. Re: Compile Error (Wolfgang Denk)
5. Re: NFS support patch (Detlev Zundel)
6. RE: Problems with u-boot, PPChameleonEVB and MontaVista kernel (Andy Hawkins)
7. Re: NFS support patch (Steven Scholz)
8. Memory Access Problem (sudhakar rajashekhara)
9. Re: telnet server on u-boot (Wolfgang Denk)
10. Re: NFS support patch (Steven Scholz)
11. Re: telnet server on u-boot (Laurent Mohin)
12. Re: Where can I find a libgcc.a with software FP. (Marius Groeger)

Well, this is an active project with some real work going on. You already receive the list in digest form which reduces the number of messages significantly. If this is still too much traffic for you you can always opt out.

Best regards,

Wolfgang Denk

Signature · 4 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
"A complex system that works is invariably found to have evolved from
a simple system that worked."             - John Gall, _Systemantics_
#3 lore raw

Hi,

Quoted 1 line

Well, this is an active project with some real work going on.

You

Quoted 1 line

already receive the list in digest form which reduces the number

of

Quoted 1 line

messages significantly. If this is still too much traffic for you

you

Quoted 1 line

can always opt out.

And quoting the entire digest to add 3 lines to the top isn't going to do much to reduce list traffic...(comment aimed at the original poster, not Wolfgang).

Andy