Skip to contentSkip to conversation

help in sysfs

DISCUSSION Ryan Reich 2 participants 3 messages Feb 26, 2004 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

Ryan Reich

author
#1 lore raw
Quoted 5 lines · [email protected] wrote:

Sorry if I'm being redundant

I spent a lot of time looking for it, and did not find, so I came here for help Perhaps anyone can help me, or point me to the right place to ask

Quoted 8 lines

I did not yet fully understand how sysfs works, and so, any docs would be welcome

My main problem is: I'm trying to use udev, but some devices for drivers that are compiled in the kernel does
not appear in. I searched for entries representing then in /sys, and found no one Specifically, no pts is found there
in my .config, I have CONFIG_UNIX98_PTYS=y
What can I do in order to solve this problem?

Have you mounted /dev/pts?

$ mount -t devpts devpts /dev/pts

(Of course, /dev/pts needs to exist first). They should appear when you connect to a terminal.

Also, not all the supported devices have yet been ported to sysfs.

Signature · 2 lines
Ryan Reich
[email protected]
#2 lore raw

It was mounted, as told me by mount(1)

but, I think it was a problem in the order of the mounts maybe it was mounted over the old /dev
I mounted it again, and it worked fine. (at least, the pts others things remais)
But, this brings me another doubt (an extension to the first one):
Why there is not any information about the pts in /sys ? There is only a directory entry called /sys/cdev/tty/pts
May I conclude that there is no info avaiable about chardevs?

One more to go:
I use PPPoE to connect to the net. When I loaded the modules, some entries apeared somewhere in /sys/udev, but the /dev entry was not created, and I had to mknod it
Does anyone knows why ?

I may be (very) wrong, but it seems to be a behaviour common to chardevs

Quoted 38 lines · Ryan Reich
Quoted 10 lines · [email protected] wrote:

Sorry if I'm being redundant

I spent a lot of time looking for it, and did not find, so I came here for help Perhaps anyone can help me, or point me to the right place to ask

I did not yet fully understand how sysfs works, and so, any docs would be welcome

Quoted 8 lines

My main problem is:
I'm trying to use udev, but some devices for drivers that are compiled in the kernel does not appear in. I searched for entries representing then in /sys, and found no one Specifically, no pts is found there
in my .config, I have CONFIG_UNIX98_PTYS=y What can I do in order to solve this problem?

Have you mounted /dev/pts?

$ mount -t devpts devpts /dev/pts

(Of course, /dev/pts needs to exist first). They should appear when you connect to a terminal.

Also, not all the supported devices have yet been ported to sysfs.

Signature · 7 lines
Ryan Reich
[email protected]
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/
Signature · 13 lines
Fortune:

If you can read this, you're too close.
---
Software Livre 
Tecnologia para um mundo melhor
==============================
Glauber de Oliveira Costa
e-mail: [email protected]
jabber: [email protected]
ICQ # : 18419549
Phone: +55 19 32892120
==============================
#3 lore raw
In reply to Ryan Reich

It was mounted, as told me by mount(1)

but, I think it was a problem in the order of the mounts maybe it was mounted over the old /dev
I mounted it again, and it worked fine. (at least, the pts others things remais)
But, this brings me another doubt (an extension to the first one):
Why there is not any information about the pts in /sys ? There is only a directory entry called /sys/cdev/tty/pts
May I conclude that there is no info avaiable about chardevs?

One more to go:
I use PPPoE to connect to the net. When I loaded the modules, some entries apeared somewhere in /sys/udev, but the /dev entry was not created, and I had to mknod it
Does anyone knows why ?

I may be (very) wrong, but it seems to be a behaviour common to chardevs

Quoted 38 lines · Ryan Reich
Quoted 10 lines · [email protected] wrote:

Sorry if I'm being redundant

I spent a lot of time looking for it, and did not find, so I came here for help Perhaps anyone can help me, or point me to the right place to ask

I did not yet fully understand how sysfs works, and so, any docs would be welcome

Quoted 8 lines

My main problem is:
I'm trying to use udev, but some devices for drivers that are compiled in the kernel does not appear in. I searched for entries representing then in /sys, and found no one Specifically, no pts is found there
in my .config, I have CONFIG_UNIX98_PTYS=y What can I do in order to solve this problem?

Have you mounted /dev/pts?

$ mount -t devpts devpts /dev/pts

(Of course, /dev/pts needs to exist first). They should appear when you connect to a terminal.

Also, not all the supported devices have yet been ported to sysfs.

Signature · 7 lines
Ryan Reich
[email protected]
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/
Signature · 14 lines
Fortune:

"What's the use of a good quotation if you can't change it?"
		-- The Doctor
---
Software Livre 
Tecnologia para um mundo melhor
==============================
Glauber de Oliveira Costa
e-mail: [email protected]
jabber: [email protected]
ICQ # : 18419549
Phone: +55 19 32892120
==============================