w83627hf driver
PATCH 1/1 w83627hf driver
Hi Greg,
The following patch against kernel 2.6.3 adds the w83627hf driver, I have ported from the 2.4 version.
Jean Delvare has asked me to send this patch to you for applying. I have tested it on w83627thf. Mark Hoffman has reviewed the code and has also tested it on w83627thf.
Regards,
Bernhard C. Schrenk
drivers/i2c/chips/Kconfig +11 -0
@@ -171,4 +171,15 @@ This driver can also be built as a module. If so, the module will be called w83l785ts. +config SENSORS_W83627HF + tristate "Winbond W83627HF, W83627THF, W83637HF, W83697HF" + depends on I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for the Winbond W836X7 series + of sensor chips: the W83627HF, W83627THF, W83637HF, and the W83697HF + + This driver can also be built as a module. If so, the module + will be called w83627hf. + endmenu
drivers/i2c/chips/Makefile +1 -0
@@ -4,6 +4,7 @@ # asb100, then w83781d go first, as they can override other drivers' addresses. obj-$(CONFIG_SENSORS_ASB100) += asb100.o +obj-$(CONFIG_SENSORS_W83627HF) += w83627hf.o obj-$(CONFIG_SENSORS_W83781D) += w83781d.o obj-$(CONFIG_SENSORS_ADM1021) += adm1021.o
drivers/i2c/chips/w83627hf.c +1374 -0
1,374 lines not on this page · raw message
Greg KH
AppliedPATCH 1/1 w83627hf driver
Quoted 8 lines · Bernhard C. Schrenk
Hi Greg,
The following patch against kernel 2.6.3 adds the w83627hf driver, I have ported from the 2.4 version.
Jean Delvare has asked me to send this patch to you for applying. I have tested it on w83627thf. Mark Hoffman has reviewed the code and has also tested it on w83627thf.
Ah, thanks for sending me a non-compressed version, I appreciate it as it makes it easier for me to apply.
Applied, thanks.
greg k-h