[2.6.3] Mouse loosing sync (again)
Hi,
I still have troubles with mouse, it keeps jumping here and there and I see lots of messages in logs:
Feb 27 20:49:55 dreamland kernel: psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost synchronization, throwing 3 bytes away. Feb 27 20:50:42 dreamland kernel: psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away. Feb 27 20:51:11 dreamland kernel: psmouse.c: bad data from KBC - bad parity Feb 27 20:51:11 dreamland kernel: psmouse.c: bad data from KBC - bad parity Feb 27 20:51:12 dreamland kernel: psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost synchronization, throwing 3 bytes away. Feb 27 20:55:32 dreamland kernel: psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost synchronization, throwing 2 bytes away. Feb 27 20:58:38 dreamland kernel: psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost synchronization, throwing 3 bytes away.
These happened while surfing web with little activity on eth0 and while disks were almost idle (-u1 is set on both of them). Using vmstat I see that I'm getting around 1300 interrupts per second while moving mouse (less than 1100 while doing nothing), so I don't think that there's something spinning in ISR for too long.
Problem first appeared in 2.6.2, 2.6.1 is unaffected. I see that in 2.6.3 there's a patch which is supposed to fix this, but it still happens for me.
Any clue?
Luca
Signature · 4 lines
Home: http://kronoz.cjb.net La vasca da bagno fu inventata nel 1850, il telefono nel 1875. Se fossi vissuto nel 1850, avrei potuto restare in vasca per 25 anni senza sentir squillare il telefono
Quoted 18 lines · Kronos
Hi,
I still have troubles with mouse, it keeps jumping here and there and I see lots of messages in logs:Feb 27 20:49:55 dreamland kernel: psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost synchronization, throwing 3 bytes away. Feb 27 20:50:42 dreamland kernel: psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away. Feb 27 20:51:11 dreamland kernel: psmouse.c: bad data from KBC - bad parity Feb 27 20:51:11 dreamland kernel: psmouse.c: bad data from KBC - bad parity Feb 27 20:51:12 dreamland kernel: psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost synchronization, throwing 3 bytes away. Feb 27 20:55:32 dreamland kernel: psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost synchronization, throwing 2 bytes away. Feb 27 20:58:38 dreamland kernel: psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost synchronization, throwing 3 bytes away.These happened while surfing web with little activity on eth0 and while disks were almost idle (-u1 is set on both of them). Using vmstat I see that I'm getting around 1300 interrupts per second while moving mouse (less than 1100 while doing nothing), so I don't think that there's something spinning in ISR for too long.
Quoted 5 lines
Problem first appeared in 2.6.2, 2.6.1 is unaffected. I see that in 2.6.3 there's a patch which is supposed to fix this, but it still happens for me.
Any clue?
The bad parity messages definitely suggest a problem with the mouse cable - either too long or broken.
Signature · 2 lines
Vojtech Pavlik SuSE Labs, SuSE CR
Il Fri, Feb 27, 2004 at 10:00:57PM +0100, Vojtech Pavlik ha scritto:
Quoted 19 lines · Kronos
Quoted 18 lines
Hi,
I still have troubles with mouse, it keeps jumping here and there and I see lots of messages in logs:Feb 27 20:49:55 dreamland kernel: psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost synchronization, throwing 3 bytes away. Feb 27 20:50:42 dreamland kernel: psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away. Feb 27 20:51:11 dreamland kernel: psmouse.c: bad data from KBC - bad parity Feb 27 20:51:11 dreamland kernel: psmouse.c: bad data from KBC - bad parity Feb 27 20:51:12 dreamland kernel: psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost synchronization, throwing 3 bytes away. Feb 27 20:55:32 dreamland kernel: psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost synchronization, throwing 2 bytes away. Feb 27 20:58:38 dreamland kernel: psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost synchronization, throwing 3 bytes away.These happened while surfing web with little activity on eth0 and while disks were almost idle (-u1 is set on both of them). Using vmstat I see that I'm getting around 1300 interrupts per second while moving mouse (less than 1100 while doing nothing), so I don't think that there's something spinning in ISR for too long.
Quoted 8 lines
Quoted 5 lines
Problem first appeared in 2.6.2, 2.6.1 is unaffected. I see that in 2.6.3 there's a patch which is supposed to fix this, but it still happens for me.
Any clue?
The bad parity messages definitely suggest a problem with the mouse cable - either too long or broken.
Hum, but why does it work with older kernels? If I boot with 2.6.1 it works without problems.
thanks,
Luca
Signature · 2 lines
Home: http://kronoz.cjb.net Se non sei parte della soluzione, allora sei parte del problema.
Quoted 10 lines · Kronos
Quoted 10 lines
Quoted 10 lines
These happened while surfing web with little activity on eth0 and while disks were almost idle (-u1 is set on both of them). Using vmstat I see that I'm getting around 1300 interrupts per second while moving mouse (less than 1100 while doing nothing), so I don't think that there's something spinning in ISR for too long.
Problem first appeared in 2.6.2, 2.6.1 is unaffected. I see that in 2.6.3 there's a patch which is supposed to fix this, but it still happens for me.
Quoted 7 lines
Quoted 4 lines
Quoted 1 line
Any clue?
The bad parity messages definitely suggest a problem with the mouse cable - either too long or broken.
Hum, but why does it work with older kernels? If I boot with 2.6.1 it works without problems.
2.6.1 ignores bad parity in mouse data.
Signature · 2 lines
Vojtech Pavlik SuSE Labs, SuSE CR
Il Fri, Feb 27, 2004 at 10:23:46PM +0100, Vojtech Pavlik ha scritto:
Quoted 14 lines · Kronos
Quoted 13 lines
Quoted 13 lines
Quoted 12 lines
These happened while surfing web with little activity on eth0 and while disks were almost idle (-u1 is set on both of them). Using vmstat I see that I'm getting around 1300 interrupts per second while moving mouse (less than 1100 while doing nothing), so I don't think that there's something spinning in ISR for too long.
Problem first appeared in 2.6.2, 2.6.1 is unaffected. I see that in 2.6.3 there's a patch which is supposed to fix this, but it still happens for me.
Any clue?
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
The bad parity messages definitely suggest a problem with the mouse cable - either too long or broken.
Hum, but why does it work with older kernels? If I boot with 2.6.1 it works without problems.
2.6.1 ignores bad parity in mouse data.
Oh, I see. Thanks for the clarification, I'll try and see if I can reproduce with another mouse.
Luca
Signature · 3 lines
Home: http://kronoz.cjb.net "L'ottimista pensa che questo sia il migliore dei mondi possibili. Il pessimista sa che e` vero" -- J. Robert Oppenheimer