PROBLEM: /proc/sys/net/ipv4/ip_dynaddr does not work correctly
Hello!
[1.] One line summary of the problem:
/proc/sys/net/ipv4/ip_dynaddr does not work correctly in debug-mode.
[2.] Full description of the problem/report:
I've recognized that the debug-mode ("2") with /proc/sys/net/ipv4/ip_dynaddr does not work correctly. In fact, if I do a "echo 2 > /proc/sys/net/ipv4/ip_dynaddr", nothing happens. There are no messages in the syslog, and there is no function of ip_dynaddr at all.
If I use "echo 1 > /proc/sys/net/ipv4/ip_dynaddr", it works fine, of course without any debugging messages.
So it seems that the "2"-mode (debug output) does not work correctly with newer kernels (tested with 2.4.21 and 2.4.24)
[3.] Keywords (i.e., modules, networking, kernel):
network, NAT, masquerading, dynamic ip
[4.] Kernel version (from /proc/version):
Linux version 2.4.24 (root@gandalf) (gcc version 2.95.4 20011002 (Debian prerelease)) #3 SMP Sun Feb 15 10:43:15 CET 2004
[7.] Environment
[7.1.] Software (add the output of the ver_linux script here)
Linux gandalf 2.4.24 #3 SMP Sun Feb 15 10:43:15 CET 2004 i686 unknown
Gnu C 2.95.4 Gnu make 3.79.1 util-linux 2.11n mount 2.11n modutils 2.4.15 e2fsprogs 1.27 PPP 2.4.1 isdn4k-utils 3.1pre4 Linux C Library 2.3.1 Dynamic linker (ldd) 2.3.1 Procps 2.0.7 Net-tools 1.60 Console-tools 0.2.3 Sh-utils 2.0.11 Modules Loaded ppp_deflate zlib_deflate bsd_comp ppp_synctty
nfsd parport_pc lp parport ipt_multiport ipt_LOG ipt_limit ipt_unclean iptable_mangle iptable_filter ipt_MASQUERADE ipt_REJECT iptable_nat ipt_state ip_conntrack_ftp ip_conntrack ip_tables ppp_generic slhc fcpci capi capifs kernelcapi capiutil printer uhci usbcore apm dmfe
[7.3.] Module information (from /proc/modules):
ppp_deflate 3008 0 (autoclean) zlib_deflate 18048 0 (autoclean) [ppp_deflate] bsd_comp 4032 0 (autoclean) ppp_synctty 5760 0 (autoclean) nfsd 45920 4 (autoclean) parport_pc 25320 1 (autoclean) lp 6528 0 (autoclean) parport 24704 1 (autoclean) [parport_pc lp] ipt_multiport 640 8 (autoclean) ipt_LOG 3360 8 (autoclean) ipt_limit 1056 9 (autoclean) ipt_unclean 6784 1 (autoclean) iptable_mangle 2208 0 (autoclean) (unused) iptable_filter 1760 1 (autoclean) ipt_MASQUERADE 1504 0 (unused)
ipt_REJECT 3264 18iptable_nat 16596 1 [ipt_MASQUERADE]ipt_state 608 20ip_conntrack_ftp 3936 0 (unused)ip_conntrack 21428 3 [ipt_MASQUERADE iptable_nat ipt_stateip_conntrack_ftp]ip_tables 12032 12 [ipt_multiport ipt_LOG ipt_limitipt_unclean iptable_mangle iptable_filter ipt_MASQUERADE ipt_REJECT iptable_nat ipt_state]ppp_generic 23308 1 (autoclean) [ppp_deflate bsd_compppp_synctty]
slhc 4736 0 (autoclean) [ppp_generic] fcpci 531008 3 capi 19360 8 capifs 3584 1 [capi] kernelcapi 30880 4 [fcpci capi] capiutil 22464 0 [kernelcapi] printer 7776 0 uhci 25320 0 (unused) usbcore 60256 1 [printer uhci] apm 9692 0 (unused) dmfe 12348 1
Bye,
Michael
Quoted 7 lines · On Sun, 15 Feb 2004 22:22:42 +0100 Michael Schlenstedt…
[2.] Full description of the problem/report:
I've recognized that the debug-mode ("2") with
/proc/sys/net/ipv4/ip_dynaddrdoes not work correctly. In fact, if I do a "echo 2 >/proc/sys/net/ipv4/ip_dynaddr", nothing happens. There are no messages in the syslog, and there is no function ofip_dynaddrat all.
It will only print a "debugging message" if the IP address of the system changes and a packet is attempted to be sent over a TCP connection, then it will print a message looking like:
tcp_v4_rebuild_header(): shifting iner->saddr from x.x.x.x to y.y.y.y
And it in fact does do this.
David S. Miller sagte:
Quoted 7 lines
It will only print a "debugging message" if the IP address of the system changes and a packet is attempted to be sent over a TCP connection, then it will print a message looking like:
tcp_v4_rebuild_header(): shiftinginer->saddrfrom x.x.x.x to y.y.y.yAnd it in fact does do this.
Well, it doesn't in my configuration. In fact, there is no function of dyn_ipaddr at all in my system (even if I use a "echo 1 > ...").
Maybe this is an issue of the combination of pppd and the capi-plugin? I can remember that I haven't had any problems with pppd and pppoe (and an early kernel-revision).
Bye,
Michael
Signature · 4 lines
___ [email protected] o /_\ `* ` _ , http://www.schlenn.net/~michael /_\ ' ,,, (o o) - (o)o) ICQ: 38605983 (Schlenn) (o o) - (o o) ooO--(_)--Ooo--ooO'(_)--Ooo-------------------------ooO--(_)--Ooo-ooO--(_)--Ooo-