TI OMAP1610 H2 config update
PATCH 1/1 TI OMAP1610 H2 config update
Greetings,
Remove hard coded network settings in TI OMAP1610 H2 default board config:
Index: u-boot/include/configs/omap1610h2.h
===================================================================
RCS file: /cvsroot/u-boot/u-boot/include/configs/omap1610h2.h,v retrieving revision 1.2
include/configs/omap1610h2.h +3 -6
@@ -94,12 +94,9 @@#define CONFIG_BOOTDELAY 3#define CONFIG_BOOTARGS "mem=32M console=ttyS0,115200n8 noinitrd \ - root=/dev/nfs rw nfsroot=157.87.82.48:\ - /home/a0875451/mwd/myfs/target ip=dhcp" -#define CONFIG_NETMASK 255.255.254.0/* talk on MY local net */ -#define CONFIG_IPADDR 156.117.97.156/* static IP I currently own */ -#define CONFIG_SERVERIP 156.117.97.139/* current IP of my dev pc */ -#define CONFIG_BOOTFILE "uImage"/* file to load */ + root=/dev/nfs ip=dhcp" +#define CONFIG_BOOTCOMMAND "bootp;tftp;bootm" +#define CFG_AUTOLOAD "n"/* No autoload */ #if (CONFIG_COMMANDS &CFG_CMD_KGDB )#define CONFIG_KGDB_BAUDRATE 115200/* speed to run kgdb serial port */
That can all be obtained automagically from the bootp/dhcp server or via setenv. I've tested U-Boot on the OMAP1610 H2 with the above default configs. Works for me...
--
Regards,
George
PATCH 1/1 TI OMAP1610 H2 config update
Quoted 2 lines · In message <[email protected]> you wrote:
Remove hard coded network settings in TI OMAP1610 H2 default board config:
Added, thanks.
Best regards,
Wolfgang Denk
Signature · 3 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de Quantum Mechanics is God's version of "Trust me."