Skip to contentSkip to conversation

AIC7899 SCSI driver problem:DV failed to configure device.

DISCUSSION Shi Jin 1 participant 1 message Mar 15, 2004

lore
Share & tools
lore

Shi Jin

author
#0 lore raw

Hi there,

I am having this problem for all the kernels I tried:
2.4.18,2.4.25 and
2.6.3.The message is:
******************begin*********************
SCSI subsystem driver Revision: 1.00
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<Adaptec aic7899 Ultra160 SCSI adapter>
aic7899: Ultra160 Wide

        Channel A, SCSI Id=7, 32/253 SCBs

scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<Adaptec aic7899 Ultra160 SCSI adapter>
aic7899: Ultra160 Wide Channel B, SCSI Id=7,
32/253 SCBs

blk: queue f797b818, I/O limit 4095Mb (mask 0xffffffff)
scsi0:A:0:0: DV failed to configure device. Please file a bug report against this driver. (scsi0:A:0): 160.000MB/s transfers (80.000MHz DT, offset 31, 16bit)
Vendor: Model: Rev: 0001
Type: Direct-Access ANSI SCSI
revision: 03
blk: queue f797b618, I/O limit 4095Mb (mask 0xffffffff)
scsi0:A:0:0: Tagged Queuing enabled. Depth 32 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 2578022400 512-byte hdwr sectors (1319947 MB)
sda: sda1 sda2 sda3
******************end ************************* The output of lspci -v is *****************begin******************** 00:0a.0 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01)
Subsystem: Tyan Computer: Unknown device 2468
Flags: bus master, 66Mhz, medium devsel,
latency 72, IRQ 20

        BIST result: 00
        I/O ports at 1000 [disabled] [size=256]
        Memory at f4000000 (64-bit, non-prefetchable)

[size=4K]
Expansion ROM at <unassigned> [disabled]
[size=128K]
Capabilities: <available only to root>

00:0a.1 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01)
Subsystem: Tyan Computer: Unknown device 2468
Flags: bus master, 66Mhz, medium devsel,
latency 72, IRQ 21

        BIST result: 00
        I/O ports at 1400 [disabled] [size=256]
        Memory at f4001000 (64-bit, non-prefetchable)

[size=4K]
Expansion ROM at <unassigned> [disabled]
[size=128K]
Capabilities: <available only to root>
******************end************************

An external IDE RAID(level 5) is connected to this SCSI port.
It is working fine for now being, but I don't know why the DV failed to
configure error happens. So I report it here.

Please tell me what else information you need. Thank you very much.

Shi Jin

__________________________________
Do you Yahoo!?
Yahoo! Mail - More reliable, more storage, less spam
http://mail.yahoo.com