Skip to contentSkip to conversation

deactivate dm disks?

DISCUSSION Wakko Warner 2 participants 4 messages Mar 16, 2004

lore
Share & tools
lore
#0 lore raw

I was playing with evms (2.2 kernel 2.6.3 vanilla) and some reason, it grabbed my usb disk (sde) and won't let go of it. Is there any way I can make it let go of the disk? It grabbed sde1 and sde2 of the disk.

I tried the deactivate which just gave me an invalid argument. I really do not wish to reboot this machine just to remove the usb disk.

I also noticed it wanted to grab my partitions on sda which were already mounted and couldn't grab them.

Signature · 1 line
 Lab tests show that use of micro$oft causes cancer in lab animals
#1 lore raw

Hi Wakko,

Quoted 3 lines · Wakko Warner

I was playing with evms (2.2 kernel 2.6.3 vanilla) and some reason, it grabbed my usb disk (sde) and won't let go of it. Is there any way I can make it let go of the disk? It grabbed sde1 and sde2 of the disk.

You can put entries in your /etc/evms.conf file to tell EVMS to ignore certain disks (e.g. if you don't want it to examine sde). See the "legacy_devices" section (for 2.4 kernels) and/or the "sysfs_devices" section (for 2.6 kernels).

Quoted 2 lines

I tried the deactivate which just gave me an invalid argument. I really do not wish to reboot this machine just to remove the usb disk.

If you have the "dmsetup" tool, you can issue a "dmsetup remove_all" command to deactivate all the DM devices. Just make sure all the DM devices are unmounted, or it won't actually release the underlying disks. Dmsetup is part of the device-mapper package, available at ftp://sources.redhat.com/pub/dm/.

Quoted 2 lines

I also noticed it wanted to grab my partitions on sda which were already mounted and couldn't grab them.

Again, you can add an "exclude" entry in your /etc/evms.conf if you want EVMS to ignore sda. Otherwise, have a look at
http://evms.sf.net/install/kernel.html#bdclaim

Signature · 3 lines
Kevin Corry
[email protected]
http://evms.sourceforge.net/
#2 lore raw
Quoted 8 lines
Quoted 3 lines

I was playing with evms (2.2 kernel 2.6.3 vanilla) and some reason, it grabbed my usb disk (sde) and won't let go of it. Is there any way I can make it let go of the disk? It grabbed sde1 and sde2 of the disk.

You can put entries in your /etc/evms.conf file to tell EVMS to ignore certain disks (e.g. if you don't want it to examine sde). See the "legacy_devices" section (for 2.4 kernels) and/or the "sysfs_devices" section (for 2.6 kernels).

Ok, great, that works.

Quoted 7 lines
Quoted 2 lines

I tried the deactivate which just gave me an invalid argument. I really do not wish to reboot this machine just to remove the usb disk.

If you have the "dmsetup" tool, you can issue a "dmsetup remove_all" command to deactivate all the DM devices. Just make sure all the DM devices are unmounted, or it won't actually release the underlying disks. Dmsetup is part of the device-mapper package, available at ftp://sources.redhat.com/pub/dm/.

Ahh, thanks. That did the trick.

Quoted 6 lines
Quoted 2 lines

I also noticed it wanted to grab my partitions on sda which were already mounted and couldn't grab them.

Again, you can add an "exclude" entry in your /etc/evms.conf if you want EVMS to ignore sda. Otherwise, have a look at
http://evms.sf.net/install/kernel.html#bdclaim

I think I'll only give it disks that I want in evms. The "sde" is a USB disk that I move around alot.

If you're not the right person to ask, please direct me to someone else. I was going to do a raid5 across a few disks (this is in the future not now). Is there any way to add disks to that raid5 using evms?

Signature · 1 line
 Lab tests show that use of micro$oft causes cancer in lab animals
#3 lore raw
Quoted 7 lines · Wakko Warner
Quoted 6 lines
Quoted 2 lines

I also noticed it wanted to grab my partitions on sda which were already mounted and couldn't grab them.

Again, you can add an "exclude" entry in your /etc/evms.conf if you want EVMS to ignore sda. Otherwise, have a look at
http://evms.sf.net/install/kernel.html#bdclaim

Quoted 6 lines

I think I'll only give it disks that I want in evms. The "sde" is a USB disk that I move around alot.

If you're not the right person to ask, please direct me to someone else. I was going to do a raid5 across a few disks (this is in the future not now). Is there any way to add disks to that raid5 using evms?

I'm one of the right people to ask about EVMS. Please send questions to [email protected] and the whole group will be able to provide assistance.

EVMS will recognize and manage software raid devices, but currently doesn't support expanding raid-5 devices. It's on our list for later this year. I believe there's a stand-alone tool available that will let you do this (google for raidreconf).

Signature · 3 lines
Kevin Corry
[email protected]
http://evms.sourceforge.net/