Multiple tc filter rules
Hi
I am in the position of needing to filter on two parameters, I need to filter on IP address and I also need to filter on the value of a connection mark. I understand the syntax of the tc filter command for each, but how can I combine them ? Is it possible to put the two tc filter commands in series or is there some syntax to do it in one tc filter command ?
Thanks
Jonathan
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi Jonathan,
Quoted 5 lines · On Tue, 16 Mar 2004 11:09:31 +0000 Jonathan Naylor <[email protected]>…
I am in the position of needing to filter on two parameters, I need to filter on IP address and I also need to filter on the value of a connection mark. I understand the syntax of the tc filter command for each, but how can I combine them ? Is it possible to put the two tc filter commands in series or is there some syntax to do it in one tc filter command ?
Well, I think it's easiest include the IP-Filtering into iptables like this:
iptables -t mangle -A <CHAIN> -[d|s] <IP-Address> -j MARK --set-mark 1
and then set up a filter with tc that directs the traffic to the right class.
Regards,
Arno.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Guten Tag Arno
Quoted 7 lines
Well, I think it's easiest include the IP-Filtering into iptables like this:
iptables -t mangle -A <CHAIN> -[d|s] <IP-Address> -j MARK --set-mark 1
and then set up a filter with tc that directs the traffic to the right class.
That makes a lot of sense. I can see how to do it, it just means a lot of changes in my shell script.
Another question, how big is the mark "variable" in bits ? 16, 32, 8 ?
I will need a large number of rules and I obviously need the mark variable to be big enough to hold them all.
At the TC end, can I share a class between many filter rules. For example: if A, B and C are all allocated each a seperate 64kbps connection, can they have a filter that points each of them (three filters) to one tc class set for a 64kbps maximum speed or do I need three tc classes set for 64kbps maximum speed ?
Quoted 3 lines
Regards,
Arno.
Jonathan
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/