New: ACPI ON -> NO PPPoE/aDSL/DHCP
--------------------------------------------------------------
*>*>*> Begin forwarded message:
Date: Wed, 17 Mar 2004 13:24:41 -0800
From: [email protected]
To: [email protected]
Subject: [Bug 2323] New: ACPI ON -> NO PPPoE/aDSL/DHCP
http://bugme.osdl.org/show_bug.cgi?id=2323
Summary: ACPI ON -> NO PPPoE/aDSL/DHCP
Kernel Version: 2.6.2
Status: NEW
Severity: blocking
Owner: acpi_config-interrupts-ztI5WcYan/[email protected]
Submitter: [email protected]
CC: [email protected]Distribution: Slackware (Kernel 2.6.2 downloaded on Kernel.org) Hardware Environment: Laptop Sharp Actius MM10 (Transmeta Crusoe)
Problem Description:
I had to compile withOUT ACPI to get my PPPoE/aDSL working :/
ACPI works great by itself, but does not let my pppoe driver (the roaring penguin) do its job properly.
It was the same way between ACPI and DHCP in kernel 2.6.0-TEST9
Workaround : With ACPI compiled IN, and booting with pci=noacpi i get both my eth0 working with pppoe and ACPI battery status... but this is only a workaround. Interrupt problem ?
Attached (taken under working pci=noacpi) :
- dmesg -s40000 output
- /proc/interrupts
- acpidmp (pmtools) output
- dmidecode
- lspci -v
---
Linux version 2.6.2 ([email protected]) (gcc version 3.2.2) #2 SMP Mon Feb 9 18:38:07 CST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009ac00 (usable)
BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000e6f0000 (usable)
BIOS-e820: 000000000e6f0000 - 000000000e6ff000 (ACPI data)
BIOS-e820: 000000000e6ff000 - 000000000e700000 (ACPI NVS)
BIOS-e820: 000000000e700000 - 000000000e800000 (usable)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
232MB LOWMEM available.
On node 0 totalpages: 59392
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 55296 pages, LIFO batch:13
HighMem zone: 0 pages, LIFO batch:1
DMI present.
ACPI: RSDP (v000 PTLTD ) @ 0x000f7420
ACPI: RSDT (v001 PTLTD RSDT 0x06040005 LTP 0x00000000) @ 0x0e6fbdfb
ACPI: FADT (v001 TMETA RSDT 0x06040005 PTL 0x000f4240) @ 0x0e6fef8c
ACPI: DSDT (v001 PTLTD DSDT 0x06040005 MSFT 0x0100000e) @ 0x00000000
Building zonelist for node : 0
Kernel command line: BOOT_IMAGE=6.acpi ro root=305 pci=noacpi
No local APIC present or hardware disabled
Initializing CPU#0
PID hash table entries: 1024 (order 10: 8192 bytes)
Detected 993.076 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Memory: 229168k/237568k available (3393k kernel code, 7636k reserved, 1181k
data, 192k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 1949.69 BogoMIPS
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0080893f 0081813f 00000000 00000000 CPU: After vendor identify, caps: 0080893f 0081813f 000000ce 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (32 bytes/line) CPU: L2 Cache: 512K (128 bytes/line) CPU: Processor revision 1.5.0.2, 1000 MHz CPU: Code Morphing Software revision 4.3.4-9-540 CPU: 20021104 07:53 official release 4.3.4#1
CPU: After all inits, caps: 0080893f 0081813f 000000ce 00000000
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU0: Transmeta(tm) Crusoe(tm) Processor TM5800 stepping 03
per-CPU timeslice cutoff: 1461.76 usecs.
task migration cache decay timeout: 2 msecs.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Starting migration thread for cpu 0
CPUS done 0
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd8ae, last bus=0
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040116
ACPI: IRQ9 SCI: Edge set to Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs *10)
ACPI: PCI Interrupt Link [LNK2] (IRQs 10)
ACPI: PCI Interrupt Link [LNK3] (IRQs *5)
ACPI: PCI Interrupt Link [LNK4] (IRQs 11)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3)
ACPI: PCI Interrupt Link [LNK6] (IRQs 4)
ACPI: PCI Interrupt Link [LNKM] (IRQs 3 4 5 7 9 10 11)
ACPI: PCI Interrupt Link [LNKA] (IRQs 9)
ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7 9 10 11)
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
Linux Kernel Card Services
options: [pci] [cardbus] [pm]drivers/usb/core/usb.c: registered new driver usbfsdrivers/usb/core/usb.c: registered new driver hub
PCI: Probing PCI hardware
PCI: Using IRQ router ALI [10b9/1533] at 0000:00:07.0
PCI: IRQ 0 for device 0000:00:05.0 doesn't match PIRQ mask - try pci=usepirqmask
PCI: IRQ 0 for device 0000:00:06.0 doesn't match PIRQ mask - try pci=usepirqmask
PCI: IRQ 0 for device 0000:00:0a.0 doesn't match PIRQ mask - try pci=usepirqmask
PCI: IRQ 0 for device 0000:00:0b.0 doesn't match PIRQ mask - try pci=usepirqmask
PCI: IRQ 0 for device 0000:00:0c.2 doesn't match PIRQ mask - try pci=usepirqmask
ikconfig 0.7 with /proc/config*
Installing knfsd (copyright (C) 1996 [email protected]).
NTFS driver 2.1.6 [Flags: R/W DEBUG].
udf: registering filesystem
Initializing Cryptographic API
Activating ISA DMA hang workarounds.
ACPI: AC Adapter [ADP1] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Processor [CPU0] (supports C1)
ACPI: Thermal Zone [THRM] (41 C)
pty: 256 Unix98 ptys configured
Linux agpgart interface v0.100 (c) Dave Jones
[drm:drm_init] *ERROR* Cannot initialize the agpgart module.
SyncLink PC Card driver $Revision: 4.15 $
SyncLink PC Card driver $Revision: 4.15 $, tty major#253
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
Using anticipatory io scheduler
floppy0: no floppy controllers found
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
8139too Fast Ethernet driver 0.9.26
PCI: Enabling device 0000:00:0a.0 (0000 -> 0003)
PCI: IRQ 0 for device 0000:00:0a.0 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Assigned IRQ 9 for device 0000:00:0a.0
eth0: RealTek RTL8139 at 0xcf009000, 08:00:1f:b1:31:f2, IRQ 9
eth0: Identified 8139 chip type 'RTL-8100B/8139D'orinoco.c 0.13e (David Gibson <[email protected]> and others)orinoco_pci.c 0.13e (David Gibson <[email protected]> & Jean
Tourrilhes <[email protected]>)
PCI: Enabling device 0000:00:0b.0 (0010 -> 0012)
PCI: IRQ 0 for device 0000:00:0b.0 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Assigned IRQ 11 for device 0000:00:0b.0
Detected Orinoco/Prism2 PCI device at 0000:00:0b.0, mem:0xF4104000 to 0xF4104FFF
-> 0xcf00b000, irq:11
Reset
done..........................................................................................................................................................................................................................................................;
Clear Reset...........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................; pci_cor : reg = 0x0 - FFFB8F72 - FFFB8D7E
eth1: Station identity 001f:0003:0001:0004
eth1: Looks like an Intersil firmware version 1.4.3
eth1: Ad-hoc demo mode supported
eth1: IEEE standard IBSS ad-hoc mode supported
eth1: WEP supported, 104-bit key
eth1: MAC address 00:02:8A:5B:DB:B0
eth1: Station name "Prism I"
eth1: ready
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ALI15X3: IDE controller at PCI slot 0000:00:10.0
ALI15X3: chipset revision 196
ALI15X3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:DMA, hdb:pio
ALI15X3: simplex device: DMA forced
ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:DMA, hdd:DMAhda: TOSHIBA MK1503GAL, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 29297520 sectors (15000 MB), CHS=29065/16/63, UDMA(100)
hda: hda1 hda2 < hda5 hda6 >
PCI: IRQ 0 for device 0000:00:05.0 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Assigned IRQ 9 for device 0000:00:05.0
Yenta: CardBus bridge found at 0000:00:05.0 [13bd:102b]
Yenta: ISA IRQ mask 0x04b8, PCI irq 9
Socket status: 30000410
PCI: Enabling device 0000:00:0c.2 (0014 -> 0016)
PCI: IRQ 0 for device 0000:00:0c.2 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Assigned IRQ 10 for device 0000:00:0c.2ehci_hcd 0000:00:0c.2: EHCI Host Controllerehci_hcd 0000:00:0c.2: irq 10, pci mem cf00f400ehci_hcd 0000:00:0c.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0c.2: USB 2.0 enabled, EHCI 0.95, driver 2003-Dec-29 hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detectedohci_hcd: 2003 Oct 13 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)ohci_hcd: block sizes: ed 64 td 64
PCI: Found IRQ 5 for device 0000:00:0c.0
PCI: Sharing IRQ 5 with 0000:00:0c.1ohci_hcd 0000:00:0c.0: OHCI Host Controllerohci_hcd 0000:00:0c.0: irq 5, pci mem c00da000ohci_hcd 0000:00:0c.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
PCI: Found IRQ 5 for device 0000:00:0c.1
PCI: Sharing IRQ 5 with 0000:00:0c.0ohci_hcd 0000:00:0c.1: OHCI Host Controllerohci_hcd 0000:00:0c.1: irq 5, pci mem c00db000ohci_hcd 0000:00:0c.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detecteddrivers/usb/core/usb.c: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver...drivers/usb/core/usb.c: registered new driver usb-storage
USB Mass Storage support registered.drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: PC Speakeri8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
Synaptics Touchpad, model: 1
Firmware: 5.9
180 degree mounted touchpad
Sensor: 34
new absolute packet format
Touchpad has extended capability bits
-> multifinger detection
-> palm detection
input: SynPS/2 Synaptics TouchPad on isa0060/serio4
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
Advanced Linux Sound Architecture Driver Version 0.9.7 (Thu Sep 25 19:16:36 2003 UTC).request_module: failed /sbin/modprobe -- snd-card-0. error = -16
PCI: IRQ 0 for device 0000:00:06.0 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Assigned IRQ 11 for device 0000:00:06.0
ALSA device list:
#0: ALI 5451 at 0x1400, irq 11
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384) ip_conntrack version 2.1 (1856 buckets, 14848 max) - 304 bytes per conntrackip_tables: (C) 2000-2002 Netfilter core teamipt_recent v0.3.1: Stephen Frost <sfrost-vhD3WmCyG/[email protected]>.
http://snowman.net/projects/ipt_recent/arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 192k freed
Adding 152576k swap on /dev/hda6. Priority:-1 extents:1
EXT3 FS on hda5, internal journalrequest_module: failed /sbin/modprobe -- char-major-10-135. error = 65280
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x207 0x220-0x22f 0x330-0x337 0x388-0x38f 0x3c0-0x3df 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
ttyS0 at I/O 0x3f8 (irq = 3) is a 16550A
process `named' is using obsolete setsockopt SO_BSDCOMPAT
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
process `host' is using obsolete setsockopt SO_BSDCOMPATrequest_module: failed /sbin/modprobe -- char-major-10-134. error = 65280 atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. spurious 8259A interrupt: IRQ7.
process `named' is using obsolete setsockopt SO_BSDCOMPAT
-------------------------------------
CPU0
0: 5976998 XT-PIC timer 1: 14958 XT-PIC i8042 2: 0 XT-PIC cascade 5: 1 XT-PIC ohci_hcd, ohci_hcd 9: 180216 XT-PIC acpi, yenta, eth0 10: 1 XT-PIC ehci_hcd 11: 0 XT-PIC eth1, ALI 5451 12: 155624 XT-PIC i8042 14: 6270 XT-PIC ide0 NMI: 0 LOC: 0 ERR: 6 MIS: 0
-------------------------------------------------------
# dmidecode 2.3 SMBIOS 2.31 present. 30 structures occupying 916 bytes. Table at 0x000DC010. Handle 0x0000 DMI type 0, 20 bytes. BIOS Information Vendor: Phoenix Technologies LTD Version: 6.00 :2.02.00U;04-03-01-02-03-00 Release Date: 02/25/2003 Address: 0xE6E40 Runtime Size: 102848 bytes ROM Size: 512 kB Characteristics: PCI is supported PC Card (PCMCIA) is supported PNP is supported BIOS is upgradeable BIOS shadowing is allowed ESCD support is available Boot from CD is supported Selectable boot is supported EDD is supported 3.5"/720 KB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) ACPI is supported USB legacy is supported Smart battery is supported BIOS boot specification is supported Handle 0x0001 DMI type 1, 25 bytes. System Information Manufacturer: SHARP Corporation Product Name: PC-MM10 Series Version: 1.0 Serial Number: UUID: FEE48000-00A5-11D6-8000-08001FB131F2 Wake-up Type: Power Switch Handle 0x0002 DMI type 2, 8 bytes. Base Board Information Manufacturer: SHARP Corporation Product Name: PC-MM10 Series Version: 1.0 Serial Number: Handle 0x0003 DMI type 3, 17 bytes. Chassis Information Manufacturer: SHARP Corporation Type: Sub Notebook Lock: Not Present Version: 1.0 Serial Number: Asset Tag: Boot-up State: Safe Power Supply State: Safe Thermal State: Safe Security Status: None OEM Information: 0x00000000 Handle 0x0004 DMI type 4, 35 bytes. Processor Information Socket Designation: None Type: Central Processor Family: Crusoe TM5000 Manufacturer: Transmeta ID: 43 05 00 00 3F 89 84 00 Version: TM5800 Voltage: 1.3 V External Clock: 66 MHz Max Speed: 1000 MHz Current Speed: 1000 MHz Status: Unpopulated Upgrade: None L1 Cache Handle: 0x0007 L2 Cache Handle: 0x0008 L3 Cache Handle: Not Provided Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x0005 DMI type 5, 18 bytes. Memory Controller Information Error Detecting Method: None Error Correcting Capabilities: None Supported Interleave: Unknown Current Interleave: Unknown Maximum Memory Module Size: 8 MB Maximum Total Memory Size: 8 MB Supported Speeds: Other Supported Memory Types: DIMM SDRAM Memory Module Voltage: Unknown Associated Memory Slots: 1 0x0006 Enabled Error Correcting Capabilities: None Handle 0x0006 DMI type 6, 12 bytes. Memory Module Information Socket Designation: None Bank Connections: 0 1 Current Speed: Unknown Type: None Installed Size: 256 MB (Double-bank Connection) Enabled Size: 256 MB (Double-bank Connection) Error Status: OK Handle 0x0007 DMI type 7, 19 bytes. Cache Information Socket Designation: L1 Cache Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Unknown Location: Internal Installed Size: 128 KB Maximum Size: 128 KB Supported SRAM Types: Unknown Installed SRAM Type: Other Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Other Handle 0x0008 DMI type 7, 19 bytes. Cache Information Socket Designation: L2 Cache Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Write Back Location: Internal Installed Size: 512 KB Maximum Size: 512 KB Supported SRAM Types: Unknown Installed SRAM Type: Unknown Speed: Unknown Error Correction Type: Unknown System Type: Unified Associativity: 4-way Set-associative Handle 0x0009 DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: CN2 Internal Connector Type: None External Reference Designator: LAN External Connector Type: RJ-45 Port Type: Network Port Handle 0x000A DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: CN8 Internal Connector Type: None External Reference Designator: Phone Out External Connector Type: Mini Jack (headphones) Port Type: Audio Port Handle 0x000B DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: CN9 Internal Connector Type: None External Reference Designator: USB1 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x000C DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: CN12 Internal Connector Type: None External Reference Designator: VGA External Connector Type: Proprietary Port Type: Video Port Handle 0x000D DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: CN10 Internal Connector Type: None External Reference Designator: USB2 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x000E DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: CN1 Internal Connector Type: Proprietary External Reference Designator: PC Card External Connector Type: Other Port Type: PCMCIA Type II Handle 0x000F DMI type 9, 13 bytes. System Slot Information Designation: CardBus Slot Type: 32-bit PC Card (PCMCIA) Current Usage: Available Length: Other ID: Adapter 0, Socket 1 Characteristics: 5.0 V is provided 3.3 V is provided PC Card-16 is supported Cardbus is supported Handle 0x0010 DMI type 10, 10 bytes. On Board Device Information Type: Video Status: Enabled Description: SMI SM722 On Board Device Information Type: Ethernet Status: Enabled Description: RealTek RTL8100BL On Board Device Information Type: Sound Status: Enabled Description: RealTek ALC201 Handle 0x0011 DMI type 11, 5 bytes. OEM Strings String 1: Handle 0x0012 DMI type 12, 5 bytes. System Configuration Options Handle 0x0013 DMI type 13, 22 bytes. BIOS Language Information Installable Languages: 1 en|US Currently Installed Language: en|US Handle 0x0014 DMI type 15, 25 bytes. System Event Log Area Length: 16 bytes Header Start Offset: 0x0000 Header Length: 16 bytes Data Start Offset: 0x0010 Access Method: General-purpose non-volatile data functions Access Address: 0x0000 Status: Valid, Not Full Change Token: 0x000000F1 Header Format: Type 1 Supported Log Type Descriptors: 1 Descriptor 1: POST error Data Format 1: POST results bitmap Handle 0x0015 DMI type 16, 15 bytes. Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 256 MB Error Information Handle: Not Provided Number Of Devices: 1 Handle 0x0016 DMI type 17, 27 bytes. Memory Device Array Handle: 0x0015 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 256 MB Form Factor: TSOP Set: 1 Locator: On Board Bank Locator: Bank0/1 Type: DDR Type Detail: Synchronous Speed: Unknown Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x0017 DMI type 19, 15 bytes. Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0000FFFFFFF Range Size: 256 MB Physical Array Handle: 0x0015 Partition Width: 0 Handle 0x0018 DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0000FFFFFFF Range Size: 256 MB Physical Device Handle: 0x0016 Memory Array Mapped Address Handle: 0x0017 Partition Row Position: 1 Handle 0x0019 DMI type 21, 7 bytes. Built-in Pointing Device Type: Touch Pad Interface: PS/2 Buttons: 2 Handle 0x001A DMI type 22, 26 bytes. Portable Battery Location: Back Manufacturer: Not Specified Name: <BAD INDEX> Chemistry: Lithium Ion Design Capacity: 59940 mWh Design Voltage: 11100 mV SBDS Version: Not Specified Maximum Error: 0% SBDS Serial Number: 0000 SBDS Manufacture Date: 1980-00-00 OEM-specific Information: 0x00000000 Handle 0x001B DMI type 32, 20 bytes. System Boot Information Status: <OUT OF SPEC> Handle 0x001C DMI type 126, 4 bytes. Inactive Handle 0x001D DMI type 127, 4 bytes. End Of Table
-----------------------------------------------------
00:00.0 Host bridge: Transmeta Corporation LongRun Northbridge (rev 03)
Subsystem: Sharp corporation: Unknown device 102b
Flags: bus master, medium devsel, latency 64
Memory at f4000000 (32-bit, non-prefetchable) [size=1M]
00:00.1 RAM memory: Transmeta Corporation SDRAM controller
Subsystem: Sharp corporation: Unknown device 102b
Flags: fast devsel
00:00.2 RAM memory: Transmeta Corporation BIOS scratchpad
Subsystem: Sharp corporation: Unknown device 102b
Flags: fast devsel
00:05.0 CardBus bridge: Ricoh Co Ltd RL5c475 (rev 81)
Subsystem: Sharp corporation: Unknown device 102b Flags: bus master, medium devsel, latency 168, IRQ 9 Memory at 10000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=01, subordinate=04, sec-latency=176 Memory window 0: 10400000-107ff000 (prefetchable) Memory window 1: 10800000-10bff000 I/O window 0: 00004000-000040ff I/O window 1: 00004400-000044ff 16-bit legacy interface ports at 0001
00:06.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link Controller Audio Device (rev 02)
Subsystem: Sharp corporation: Unknown device 102b
Flags: bus master, medium devsel, latency 64, IRQ 11 I/O ports at 1400 [size=256]
Memory at f4100000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV]
Subsystem: Sharp corporation: Unknown device 102b
Flags: bus master, medium devsel, latency 0
Capabilities: [a0] Power Management version 1
00:09.0 VGA compatible controller: Silicon Motion, Inc. SM720 Lynx3DM (rev c1) (prog-if 00 [VGA])
Subsystem: Sharp corporation: Unknown device 102b
Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 10 Memory at f8000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [40] Power Management version 1
Capabilities: [50] AGP version 2.0
00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Sharp corporation: Unknown device 102b
Flags: bus master, medium devsel, latency 64, IRQ 9 I/O ports at 1800 [size=256]
Memory at f4101000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
00:0b.0 Network controller: Harris Semiconductor Prism 2.5 Wavelan chipset (rev 01)
Subsystem: AMBIT Microsystem Corp.: Unknown device 0200
Flags: medium devsel, IRQ 11
Memory at f4104000 (32-bit, prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
00:0c.0 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI])
Subsystem: Sharp corporation: Unknown device 102b
Flags: bus master, medium devsel, latency 64, IRQ 5 Memory at 000da000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
00:0c.1 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI])
Subsystem: Sharp corporation: Unknown device 102b
Flags: bus master, medium devsel, latency 64, IRQ 5 Memory at 000db000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
00:0c.2 USB Controller: NEC Corporation USB 2.0 (rev 02) (prog-if 20 [EHCI])
Subsystem: Sharp corporation: Unknown device 102b
Flags: bus master, medium devsel, latency 132, IRQ 10 Memory at f4101400 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
00:10.0 IDE interface: ALi Corporation M5229 IDE (rev c4) (prog-if ea)
Subsystem: Sharp corporation: Unknown device 102b
Flags: bus master, medium devsel, latency 64
I/O ports at 1000 [size=16]
Capabilities: [60] Power Management version 2
00:11.0 Bridge: ALi Corporation M7101 PMU
Subsystem: Sharp corporation: Unknown device 102b
Flags: medium devsel
--------------------------------------------------
That's all folks !
Big thanks to Leonard B. for helping report this bug :)
------- You are receiving this mail because: -------
You reported the bug, or are watching the reporter.
You are on the CC list for the bug, or are watching someone who is.
--------------------------------------------------------------
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click