Skip to contentSkip to conversation

Recent input patch broke my keyboard

DISCUSSION Anton Blanchard 1 participant 1 message Mar 18, 2004

lore
Share & tools
lore
#0 lore raw

Hi,

The patch below breaks my ppc64 box. None of the keys behave as expected :) I also get a bunch of stuff in the dmesg:

atkbd.c: Use 'setkeycodes 66 <keycode>' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0x66 on isa0060/serio0).

The boot messages show:

serio: i8042 AUX port at 0x60,0x64 irq 12
input: PS/2 Logitech Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0

If I back the patch out, things work again and I get:

serio: i8042 AUX port at 0x60,0x64 irq 12
input: PS/2 Logitech Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Raw Set 2 keyboard on isa0060/serio0

Sounds like assuming we are always in translate mode is bad for me.

Anton

# This is a BitKeeper generated diff -Nru style patch. #
# ChangeSet
# 2004/03/03 15:14:01+01:00 [email protected]
# input: i8042.c:

#     Assume the chip always is in XLATE mode, even when it doesn't
#     have the XLATE bit set - apparently IBM PS/2 model 70 behaves
#     this way.
# 
# drivers/input/serio/i8042.c
#   2004/03/03 15:13:56+01:00 [email protected] +0 -8
#   input: i8042.c:
#     Assume the chip always is in XLATE mode, even when it doesn't
#     have the XLATE bit set - apparently IBM PS/2 model 70 behaves
#     this way.
# 
diff -Nru a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
--- a/drivers/input/serio/i8042.c	Thu Mar 18 15:06:59 2004
+++ b/drivers/input/serio/i8042.c	Thu Mar 18 15:06:59 2004
@@ -722,14 +722,6 @@
 	}

/*
- * If the chip is configured into nontranslated mode by the BIOS, don't
- * bother enabling translating and be happy.
- */
-
- if (~i8042_ctr & I8042_CTR_XLATE)
- i8042_direct = 1;
-
-/*
* Set nontranslated mode for the kbd interface if requested by an option.
* After this the kbd interface becomes a simple serial in/out, like the aux
* interface is. We don't do this by default, since it can confuse notebook