CONFIG_THERM_WINDTUNNEL
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hello,
There is an option in kernel configuration (2.6.3):CONFIG_THERM_WINDTUNNEL=m
How does G4 Windtunnel thermal support work? Does it make an ability to change fans speed by the OS or maybe something other/else?
Greetings,
- --
Michał Roszka
[email protected]
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)
iD8DBQFAWU4ENyoZJvl7/4kRAqlMAJ9+nP8FgPU0Toa3ylEl8Ae0uRRcaQCeI2xy JajBj0nto2kKfSxgxFqNv1g=
=SrIH
-----END PGP SIGNATURE-----
Quoted 4 lines · On Thu, 18 Mar 2004, [iso-8859-2] Michał Roszka wrote:
There is an option in kernel configuration (2.6.3):
CONFIG_THERM_WINDTUNNEL=m
How does G4 Windtunnel thermal support work? Does it make an ability to change fans speed by the OS or maybe something other/else?
Yes, it works. It controls the speed of the CPU fan according to the temperature. Do not forget to load the i2c_keywest module.
--
Giuliano.
Quoted 6 lines · Giuliano Pochini
Quoted 3 lines
How does G4 Windtunnel thermal support work? Does it make an ability to change fans speed by the OS or maybe something other/else?
Yes, it works. It controls the speed of the CPU fan according to the temperature. Do not forget to load the
i2c_keywestmodule.
Nice to see that this driver has made it into the kernel tree :-).
I've been thinking about adding proper sysfs and make things somewhat customable from userspace. I'm not quite sure the working point is optimal for all machines (the ambient temperature is also a factor).
Btw, I would like to get reports about how well this driver works with respect to noise reduction. I'm in particular interested in the dual 1.4 GHz model...
/Samuel
Quoted 3 lines · Samuel Rydh
Btw, I would like to get reports about how well this driver works with respect to noise reduction. I'm in particular interested in the dual 1.4 GHz model...
The author has a dual-1.2 and I tested it on another dual-1.2. I don't know if it has been tested on other mathines. The driver writes in the system logs the temperature and the fan speed every time they change, so you can check what it's doing (and you can unload the module if you see it does something wrong).
--
Giuliano.
Giuliano Pochini, wiadomość z dnia: czw 18. marca 2004 12:27
Quoted 2 lines
The author has a dual-1.2 and I tested it on another dual-1.2. I don't know if it has been tested on other mathines.
I also have a dual-1.25 and I do not know anybody with Linux on the Power Mac Dual :(.
Signature · 2 lines
Michał Roszka [email protected]
Quoted 11 lines · Giuliano Pochini
Quoted 3 lines · Samuel Rydh
Btw, I would like to get reports about how well this driver works with respect to noise reduction. I'm in particular interested in the dual 1.4 GHz model...
The author has a dual-1.2 and I tested it on another dual-1.2. I don't know if it has been tested on other mathines. The driver writes in the system logs the temperature and the fan speed every time they change, so you can check what it's doing (and you can unload the module if you see it does something wrong).
Yes I know... I wrote it :-)
It should be perfectly safe to use. It contains a (very conservative) fail safe; if the temperature exceeds the working point by a few degrees, the hardware overheat protection is programmed to turn on the fans 100%. This works even if the kernel has locked up solidly.
I'm mostly concerned that the working point is set too low for the 1.4 Ghz machine. If it is, then there might be some unnecessary noise. When the temperature is going down towards the working point, the fan speed is increased to remove the last extra heat. The assumption is that some temporary heat generating operation has finished (like a CPU intensive calculation or heavy usage of the graphics card). This is a good strategy if the working point is correct but not-so-good if the working point is higher than expected (cyclic fan behavior might occur).
In all cases, it should be an improvement compared to the firmware setting which is incredibly noisy and usually causes short period fan speed cycling.
/Samuel
Hi!
Quoted 10 lines
Quoted 9 lines
Quoted 3 lines
Btw, I would like to get reports about how well this driver works with respect to noise reduction. I'm in particular interested in the dual 1.4 GHz model...
The author has a dual-1.2 and I tested it on another dual-1.2. I don't know if it has been tested on other mathines. The driver writes in the system logs the temperature and the fan speed every time they change, so you can check what it's doing (and you can unload the module if you see it does something wrong).
Quoted 7 lines
Yes I know... I wrote it :-)
It should be perfectly safe to use. It contains a (very conservative) fail safe; if the temperature exceeds the working point by a few degrees, the hardware overheat protection is programmed to turn on the fans 100%. This works even if the kernel has locked up solidly.
Is it actually possible to set that hardware to self-destruct?
[ACPI notebooks have very simple hardware failsafe: if temperature exceeds some hard limit, power is simply cut.]
Pavel
Signature · 2 lines
When do you have a heart between your knees? [Johanka's followup: and *two* hearts?]
Quoted 4 lines · Pavel Machek
Is it actually possible to set that hardware to self-destruct?
[ACPI notebooks have very simple hardware failsafe: if temperature exceeds some hard limit, power is simply cut.]
Well, I'm not sure.
I know that the hardware which controls the fan (a separate temperature sensor and a combined sensor/controller) is not connected to any death switch; the available overheat pin serves as a 100% fan override. There might very well be a safety mechanism in the UniNorth bridge though. Something like a forced power off if interrupts are not handled in a timely manner. I'm pretty sure I have seen references to this behavior in conjunction with the PowerBook G4. The dual G4 architecture is not all that different...
It would be interesting to see what happens if one disables the overheat protection and stops the fan. Anybody volunteering? At least one has an excellent reason why one need one of those new G5 machines if things start to smoke :-).
/Samuel
Hi!
Quoted 7 lines
Quoted 4 lines
Is it actually possible to set that hardware to self-destruct?
[ACPI notebooks have very simple hardware failsafe: if temperature exceeds some hard limit, power is simply cut.]
Well, I'm not sure.
Quoted 8 lines
I know that the hardware which controls the fan (a separate temperature sensor and a combined sensor/controller) is not connected to any death switch; the available overheat pin serves as a 100% fan override. There might very well be a safety mechanism in the UniNorth bridge though. Something like a forced power off if interrupts are not handled in a timely manner. I'm pretty sure I have seen references to this behavior in conjunction with the PowerBook G4. The dual G4 architecture is not all that different...
ACPI design seems to have aditional benefit: if your fan fails, you can still operate machine safely. You just have to be clever with throttling etc :-). [Assuming vendor did set shutdown threshold right. HP Omnibook XE3 will kill power at 83C. If you leave it running at ~82C for ten hours, you'll fry the disk. Oops.]
Funniest machine in this regard was 300MHz P2 toshiba. On extreme overheat (95C), it went to 40MHz no matter what os did. At that point it was able to cool itself even without fan. [But I was pretty puzzled when I saw that behaviour].
Quoted 4 lines
It would be interesting to see what happens if one disables the overheat protection and stops the fan. Anybody volunteering? At least one has an excellent reason why one need one of those new G5 machines if things start to smoke :-).
Well, its enough to end the test when CPU starts doing errors. Usually CPU stops working at some temperature, and is only physically damaged after that. Or you can get datasheets from CPU manufacturer, and call the machine's design broken when it exceeds CPU design limits by 5C... This should be testable without letting magic smoke out.
Pavel
Signature · 2 lines
When do you have a heart between your knees? [Johanka's followup: and *two* hearts?]
Quoted 2 lines · Giuliano Pochini
Yes, it works. It controls the speed of the CPU fan according to the temperature. Do not forget to load the
i2c_keywestmodule.
Should I also compile something from Processor / Thermal Management Support?
Signature · 2 lines
Michał Roszka [email protected]