Skip to contentSkip to conversation

Temp problems amd xp

DISCUSSION Martin Wilke 4 participants 4 messages Mar 18, 2004 – Mar 28, 2004

lore
Share & tools
lore
#0 lore raw

just wanna know if somebody has the same problem as me.

i' m running an amd xp 3000+ on an epox board with nforce2-chipset. everything was alright til i changeed from kernbel 2.6.3 to 2.6.4 3 days ago. since then my cpu-temperature rised to 60-65 degrees, sometimes 73 degrees (while compiling) and pc powered himself down then.
i took my old config-files and did not change anything.
last night i upgraded to 2.6.5-rc1 and everything is running normal as before..

#1 lore raw

Am Donnerstag, 18. März 2004 17:06 schrieb Martin Wilke:

Quoted 9 lines

just wanna know if somebody has the same problem as me.

i' m running an amd xp 3000+ on an epox board with nforce2-chipset. everything was alright til i changeed from kernbel 2.6.3 to 2.6.4 3 days ago. since then my cpu-temperature rised to 60-65 degrees, sometimes 73 degrees (while compiling) and pc powered himself down then. i took my old config-files and did not change anything.
last night i upgraded to 2.6.5-rc1 and everything is running normal as before..

This seems to be a very big problem for you as you sent this E-mail three times... ;-)

But maybe following threads on LKML are interesting for you:
http://marc.theaimsgroup.com/?l=linux-kernel&m=107840458123059&w=2
http://marc.theaimsgroup.com/?l=linux-kernel&m=107883077409631&w=2

Regards
Thomas Schlichter

#2 lore raw
In reply to Martin Wilke
Quoted 6 lines · Martin Wilke

just wanna know if somebody has the same problem as me.

i' m running an amd xp 3000+ on an epox board with nforce2-chipset. everything was alright til i changeed from kernbel 2.6.3 to 2.6.4 3 days ago. since then my cpu-temperature rised to 60-65 degrees, sometimes 73 degrees (while compiling) and pc powered himself down then.

Is it really a problem ? Simply raise the bios temperature limit and it's OK. My dual XP is between 65 and 75 degrees idle, and goes up to 93 during intensive compilations, and it's doing very well. Admittedly, you have to wait a *very* long time after power down to touch the heatsinks, but I don't need to do that anyway, and I prefer the sound of silence ;-)

Cheers,
Willy

#3 lore raw

Hi!

Quoted 7 lines
Quoted 6 lines

just wanna know if somebody has the same problem as me.

i' m running an amd xp 3000+ on an epox board with nforce2-chipset. everything was alright til i changeed from kernbel 2.6.3 to 2.6.4 3 days ago. since then my cpu-temperature rised to 60-65 degrees, sometimes 73 degrees (while compiling) and pc powered himself down then.

Quoted 5 lines

Is it really a problem ? Simply raise the bios temperature limit and it's OK. My dual XP is between 65 and 75 degrees idle, and goes up to 93 during intensive compilations, and it's doing very well. Admittedly, you have to wait a *very* long time after power down to touch the heatsinks, but I don't need to do that anyway, and I prefer the sound of silence ;-)

So you raised thermal limit and disconnected fans? :-).

Pavel
PS: [With proper passive cooling, you might get away with that. I've one athlon 900, whose fan now produces noise but not cooling. With strategically placed piece of paper it produces no noise, but no cooling either. ACPI thermal managment turns it into +/- usable machine.

Signature · 2 lines
When do you have a heart between your knees?
[Johanka's followup: and *two* hearts?]